Meziere-Reverser-web-ad-90x750-r3 copy

150 Most Recent Posts

Thread AuthorPostersPost AuthorForumThread/Post Link
Geep20202woodyNew Member Introduct...New Member
Trampas3PanheadSteveHarley Tri GlideWas at my dealer today
Trampas3SeaweedHarley Tri GlideWas at my dealer today
Grandpot3cycle7447Honda TrikesFront tire?
Grandpot3tourmanHonda TrikesFront tire?
ultrafxr5TrampasHarley Tri GlideFinished at last . . . well at leas...
Trampas3TrampasHarley Tri GlideWas at my dealer today
Grandpot3GrandpotHonda TrikesFront tire?
Geep20202Geep2020New Member Introduct...New Member
Oldman-TriGlide3NotgrownupHarley Tri GlideOpen or Closed Trailer for 2028 Tri...
Oldman-TriGlide3ultrafxrHarley Tri GlideOpen or Closed Trailer for 2028 Tri...
Noodles1073BrokenBackJackHarley Freewheeler /...Very Nice Gloves
Oldman-TriGlide3Oldman-TriGlideHarley Tri GlideOpen or Closed Trailer for 2028 Tri...
RedOregon13Papa ZookHarley Tri GlideUpgrades on '24 Triglide?
Bama boy4DragonStallion TrikesStallion fuel pump
Bama boy4DragonStallion TrikesStallion fuel pump
Bama boy4DragonStallion TrikesStallion fuel pump
Papa Zook239SullyNew Member Introduct...What Made You Join TrikeTalk Forum?
RedOregon13RedOregonHarley Tri GlideUpgrades on '24 Triglide?
RedOregon13NotgrownupHarley Tri GlideUpgrades on '24 Triglide?
phillipschuckann7NotgrownupHonda TrikesWho made my trike?
Papa Zook239ol' schoolNew Member Introduct...What Made You Join TrikeTalk Forum?
PKLGW2pawsHonda Trikes2007 gl1800 motor trike
ultrafxr5Papa ZookHarley Tri GlideFinished at last . . . well at leas...
Noodles1073NotgrownupHarley Freewheeler /...Very Nice Gloves
ultrafxr5NotgrownupHarley Tri GlideFinished at last . . . well at leas...
Papa Zook239rhino 2New Member Introduct...What Made You Join TrikeTalk Forum?
PKLGW2PKLGWHonda Trikes2007 gl1800 motor trike
Papa Zook239skisnow806New Member Introduct...What Made You Join TrikeTalk Forum?
Speedy Pete12JTJerseyNew Member Introduct...New member from Alberta, Canada
Just BOB2Just BOBStallion Trikesinfo
ultrafxr5Longbeard71Harley Tri GlideFinished at last . . . well at leas...
ultrafxr5ultrafxrHarley Tri GlideFinished at last . . . well at leas...
ultrafxr5TrampasHarley Tri GlideFinished at last . . . well at leas...
ultrafxr5ultrafxrHarley Tri GlideFinished at last . . . well at leas...
Noodles1073Noodles107Harley Freewheeler /...Very Nice Gloves
Speedy Pete12cycle7447New Member Introduct...New member from Alberta, Canada
RISal24!12cycle7447New Member Introduct...New member..new to trikes
phillipschuckann7Papa ZookHonda TrikesWho made my trike?
RISal24!12ol' schoolNew Member Introduct...New member..new to trikes
Bama boy4Grey_Ghost_27Stallion TrikesStallion fuel pump
phillipschuckann7trike ladyHonda TrikesWho made my trike?
RISal24!12trike ladyNew Member Introduct...New member..new to trikes
Speedy Pete12RustyBNew Member Introduct...New member from Alberta, Canada
RISal24!12Marc HNew Member Introduct...New member..new to trikes
Bowie11RustyBNew Member Introduct...New to trike, old time rider
RISal24!12RustyBNew Member Introduct...New member..new to trikes
RISal24!12rhino 2New Member Introduct...New member..new to trikes
RISal24!12hardwickbvNew Member Introduct...New member..new to trikes
Bowie11hardwickbvNew Member Introduct...New to trike, old time rider
RISal24!12Uncle FesterNew Member Introduct...New member..new to trikes
Bowie11ZammyNew Member Introduct...New to trike, old time rider
RISal24!12SullyNew Member Introduct...New member..new to trikes
RISal24!12ZammyNew Member Introduct...New member..new to trikes
Chief80138520fdHarley Tri GlideHow many miles on your Triglide?
RISal24!12GorillaNew Member Introduct...New member..new to trikes
RISal24!12RISal24!New Member Introduct...New member..new to trikes
woody19woodyHonda Trikes2019 Goldwing CSC
DK Custom Products362NotgrownupHarley Tri GlideWhat did you do to Your Tri-Glide T...
Bouncer10NotgrownupHarley Tri GlideDrive Belt Replacement Time
Bouncer10BouncerHarley Tri GlideDrive Belt Replacement Time
Bouncer10BouncerHarley Tri GlideDrive Belt Replacement Time
phillipschuckann7GorillaHonda TrikesWho made my trike?
rjd637brianlHonda Trikes1989 Honda Goldwing trike opinions
DeathBySnuSnu19GorillaVW Powered TrikesVolkswagen Kit Cars
DK Custom Products362520fdHarley Tri GlideWhat did you do to Your Tri-Glide T...
SHARKDIVER4DK Custom ProductsGeneral Harley Chatsuper shox
phillipschuckann7trike ladyHonda TrikesWho made my trike?
phillipschuckann7ol' schoolHonda TrikesWho made my trike?
phillipschuckann7rhino 2Honda TrikesWho made my trike?
phillipschuckann7phillipschuckannHonda TrikesWho made my trike?
Bowie11Uncle FesterNew Member Introduct...New to trike, old time rider
RedOregon13RedOregonHarley Tri GlideUpgrades on '24 Triglide?
DeathBySnuSnu19DeathBySnuSnuVW Powered TrikesVolkswagen Kit Cars
Bowie11woodyNew Member Introduct...New to trike, old time rider
Just BOB2GorillaStallion Trikesinfo
SHARKDIVER4WindyOneGeneral Harley Chatsuper shox
Bouncer10GorillaHarley Tri GlideDrive Belt Replacement Time
Just BOB2Just BOBStallion Trikesinfo
Chief80138CagmoHarley Tri GlideHow many miles on your Triglide?
PopPop13consitterNew Member Introduct...New Member
TxHarleyRider2Papa ZookHarley Trike Convers...Need help bad with conversion.
PopPop13Pegasus1300New Member Introduct...New Member
Bouncer10NotgrownupHarley Tri GlideDrive Belt Replacement Time
PopPop13ol' schoolNew Member Introduct...New Member
Bowie11ol' schoolNew Member Introduct...New to trike, old time rider
Chief80138DOKKHarley Tri GlideHow many miles on your Triglide?
Bouncer10BouncerHarley Tri GlideDrive Belt Replacement Time
Bowie11trike ladyNew Member Introduct...New to trike, old time rider
Bowie11GorillaNew Member Introduct...New to trike, old time rider
Bowie11rhino 2New Member Introduct...New to trike, old time rider
Bowie11Marc HNew Member Introduct...New to trike, old time rider
SaltBushBill11Marc HNew Member Introduct...New member
Bowie11BowieNew Member Introduct...New to trike, old time rider
Rick Sinacore9RawhidekenHarley Tri GlideTour pack reinforcement
SaltBushBill11Uncle FesterNew Member Introduct...New member
Burnerboy3tommyv333Harley Trike Convers...Hey Bozo (Andrew)
Old Aviator5Old AviatorHonda TrikesGreasing a Motortrike Coupe SA rear...
Old Aviator5Old AviatorHonda TrikesGreasing a Motortrike Coupe SA rear...
Noodles1073JTJerseyHarley Freewheeler /...Tobacco Fade
Noodles1073trike ladyHarley Freewheeler /...Tobacco Fade
Old Aviator5Phu CatHonda TrikesGreasing a Motortrike Coupe SA rear...
SaltBushBill11SullyNew Member Introduct...New member
ronc44242Papa ZookHarley Tri Glidequestion
TxHarleyRider2TxHarleyRiderHarley Trike Convers...Need help bad with conversion.
Chappy KC5StrelnikovFrankensteinFrankenstein Kit
jerry1@iw.net4StrelnikovFrankensteinFrankenstein owners
TxHarleyRider2Papa ZookHarley Trike Convers...Need help bad with conversion.
Skavoola14SkavoolaNew Member Introduct...New to Trike Talk
Old Aviator5GoldWingrGregHonda TrikesGreasing a Motortrike Coupe SA rear...
El Lobo10El LoboHarley Tri GlideBeen away for a while
SaltBushBill11GorillaNew Member Introduct...New member
cissywalton2GorillaCalifornia Sidecar T...how do I change out the reverse bel...
Noodles1073Noodles107Harley Freewheeler /...Tobacco Fade
Old Aviator5Old AviatorHonda TrikesGreasing a Motortrike Coupe SA rear...
SaltBushBill11trike ladyNew Member Introduct...New member
ronc44242ronc4424Harley Tri Glidequestion
Old Aviator5SkavoolaHonda TrikesGreasing a Motortrike Coupe SA rear...
Old Aviator5rhino 2Honda TrikesGreasing a Motortrike Coupe SA rear...
Old Aviator5Old AviatorHonda TrikesGreasing a Motortrike Coupe SA rear...
cissywalton2cissywaltonCalifornia Sidecar T...how do I change out the reverse bel...
Skavoola14PosseRiderNew Member Introduct...New to Trike Talk
Skavoola14woodyNew Member Introduct...New to Trike Talk
PopPop13woodyNew Member Introduct...New Member
Speedy Pete12woodyNew Member Introduct...New member from Alberta, Canada
Vulcanology10woodyNew Member Introduct...New member
SaltBushBill11woodyNew Member Introduct...New member
SaltBushBill11hardwickbvNew Member Introduct...New member
Vulcanology10hardwickbvNew Member Introduct...New member
Speedy Pete12hardwickbvNew Member Introduct...New member from Alberta, Canada
SaltBushBill11rhino 2New Member Introduct...New member
RedOregon13NotgrownupHarley Tri GlideUpgrades on '24 Triglide?
SaltBushBill11ol' schoolNew Member Introduct...New member
Vulcanology10ol' schoolNew Member Introduct...New member
Speedy Pete12ol' schoolNew Member Introduct...New member from Alberta, Canada
D'07ShadowAero6ol' schoolNew Member Introduct...My Older and Dear Friends Gideon! M...
SaltBushBill11scuzziNew Member Introduct...New member
SaltBushBill11SaltBushBillNew Member Introduct...New member
PopPop2Pegasus1300Can Am Spyder Trike...New Member
Vulcanology10GorillaNew Member Introduct...New member
Vulcanology10rhino 2New Member Introduct...New member
Speedy Pete12Marc HNew Member Introduct...New member from Alberta, Canada
Vulcanology10Marc HNew Member Introduct...New member
TxHarleyRider2TxHarleyRiderHarley Trike Convers...Need help bad with conversion.
Speedy Pete12trike ladyNew Member Introduct...New member from Alberta, Canada
rjd637trike ladyHonda Trikes1989 Honda Goldwing trike opinions
DrCrazyTrain13Uncle FesterNew Member Introduct...Introduction
Vulcanology10Uncle FesterNew Member Introduct...New member
Speedy Pete12Uncle FesterNew Member Introduct...New member from Alberta, Canada
Speedy Pete12rhino 2New Member Introduct...New member from Alberta, Canada
Likes Likes:  19
Thanks Thanks:  0
Page 1 of 9 1 2 3 4 5 6 7 8 9 LastLast
Results 1 to 20 of 166

Thread: Ongoing 2014 Tri-Glide build-out, lots of pics and thoughts on the differences

  1. #1
    Sponsor
    TrikeTalk Sponsor
    DK Custom Products's Avatar
    Join Date
    Jun 2013
    Location
    Red Banks, MS
    Posts
    9,122
    Thanks
    1
    Thanked 1 Time in 1 Post

    Default Ongoing 2014 Tri-Glide build-out, lots of pics and thoughts on the differences

    Just picked up a new 2014 Tri-Glide this afternoon.
    Big Blue Pear/Vivid Black

    Bone Stock

    Got 70 miles in riding it home in the rain, dodging thunderstorms.
    I will be posting pics of the mods I do to this bike over the next month or so.

    Rolled it out and the clouds opened up for about 10 minutes of heavy rain. Soon after it subsided, the dealership took their obligatory picture, and I was on my way.



    Took a bit of a long route to the shop, then on home. Got in about 70 miles. Mostly wet roads, some sun, some light rain, and one heavy downpour.

    During break-in I'm keeping my wrist out of the throttle and keeping the RPM's below 3000, so it is difficult to gauge the power difference. However, there definitely seems to be more torque from 2500 - 3000 RPM, even with light throttle.

    I did hit some sweepers at 55-65 mph, and the front end definitely is more sturdy.

    I don't like the linked brakes...may get used to them, time will tell.
    The seat is more comfortable for me.

    That big screen in the fairing is still a mystery to me...guess I need to learn it.

    When I got to the shop I plugged a Power Vision into the diagnostic port to see what the engine temp reading was. 214 degrees. Much lower than it would have been for a pre-14, given the same conditions.

    With the vent open in the fairing there was a definite reduction in buffeting. (I wear a Nolan Modular and am 5' 10

    That's it for now. Will be posting my initial list of mods later tonight or tomorrow.

    I will be posting pics along the way, as I add them on.

    Kevin
    www.DKCustom.com
    Call: 662-252-8828 Text: 662-420-4891
    Email: Support@DKCustomProducts.com


  2. #2
    10000+ Posts
    TrikeTalk Founder
    Papa Zook's Avatar
    Join Date
    Dec 2007
    Location
    Conroe, Texas
    Posts
    10,435
    Thanks
    1
    Thanked 2 Times in 2 Posts

    Default Re: Ongoing 2014 Tri-Glide build-out, lots of pics and thoughts on the differences

    Congratulations on the new trike Kevin, she's a beauty!

  3. #3
    80+ Posts ELVISTO's Avatar
    Join Date
    Nov 2013
    Location
    UK
    Posts
    75
    Thanks
    0
    Thanked 1 Time in 1 Post

    Cool Re: Ongoing 2014 Tri-Glide build-out, lots of pics and thoughts on the differences

    Congratulations Kevin and Mary, can't wait to read about your next trip,

  4. #4
    90+ Posts woodmnctry's Avatar
    Join Date
    Aug 2013
    Location
    mountains, Co, USA
    Posts
    96
    Thanks
    0
    Thanked 0 Times in 0 Posts

    Default Re: Ongoing 2014 Tri-Glide build-out, lots of pics and thoughts on the differences

    Congrats !!!


    Looking forward to "DA LIST"

  5. #5
    20+ Posts
    Join Date
    Apr 2014
    Location
    Mt.Vernon IN US
    Posts
    21
    Thanks
    0
    Thanked 0 Times in 0 Posts

    Default Re: Ongoing 2014 Tri-Glide build-out, lots of pics and thoughts on the differences

    Hi will be glad to see how the new Trike does for you thinking about getting a 2014 or just wait for the 2015 to come out I will be reading your post every day thanks

  6. DKCustoms postbit
  7. #6
    2500+ Posts trikermutha's Avatar
    Join Date
    Oct 2010
    Location
    USA
    Posts
    2,601
    Thanks
    0
    Thanked 0 Times in 0 Posts

    Default Re: Ongoing 2014 Tri-Glide build-out, lots of pics and thoughts on the differences

    That's one big list and I am sure there will be more added to it..

  8. #7
    Senior Moderator
    Gold Club Member
    Gorilla's Avatar
    Join Date
    Oct 2008
    Location
    Key Largo. Fl,. USA
    Posts
    15,112
    Thanks
    0
    Thanked 2 Times in 2 Posts

    Default Re: Ongoing 2014 Tri-Glide build-out, lots of pics and thoughts on the differences

    Congrats nice trike. Good plan on the mods.
    Stallion #406 // 2013 Tri-Glide

  9. #8
    10+ Posts
    Join Date
    Aug 2013
    Location
    cleveland,tn,usa
    Posts
    13
    Thanks
    0
    Thanked 0 Times in 0 Posts

    Default Re: Ongoing 2014 Tri-Glide build-out, lots of pics and thoughts on the differences

    congrats on the new ride...thinking of pulling the triger myself...look forward to the updates...jim...

  10. #9
    Sponsor
    TrikeTalk Sponsor
    DK Custom Products's Avatar
    Join Date
    Jun 2013
    Location
    Red Banks, MS
    Posts
    9,122
    Thanks
    1
    Thanked 1 Time in 1 Post

    Default Re: Ongoing 2014 Tri-Glide build-out, lots of pics and thoughts on the differences

    Forgot a couple of things in the previous list


    24. Tank Lift with Deluxe Option

    25. High Performance Cleanable Oil Filter

    26. 3M protective film on fenders and sidecovers

    Initial Ride Report-

    Yesterday I put another 140 miles on it. About 10 of them on the interstate, the rest on winding country roads. Some hills, lots of sweepers, and a few twistys.

    Ambient temp varied between 82 and 90 degrees.

    I need to get the floorboards pushed out and my highway pegs with heel rests installed, not used to having my feet so tucked in.

    Even though I stayed below 3500 rpm and did not get heavy with the throttle, there is Definitely More Power out of this engine!

    I don't have the Power Vision hooked up yet, so was not able to monitor the engine temp. However, the radiator fans only kicked in once, and that was when I stopped during the ride and let the engine idle for about 5 minutes in a parking lot.

    Once it was heat soaked, the oil temps ranged between 260-270 (at the dipstick), which is too hot for my liking, we'll see how much those drop after doing some of the other mods. If they don't get down in the 230 area, I will be looking for a place to mount an oil cooler.

    The heavier front forks definite improved the handling over previous years...not that it was bad before, it is just better now!<

    The stereo sound is better too!


    Spent 3 hours yesterday afternoon washing it and using the glare polish.

    Paint- When it is cloudy it looks like a navy blue color, when the sun hits it, it really pops with all the flake!

    With the Canbus system, all the wiring under the seat is much more tidy.

    I found myself actually using the parking brake...on the '11 it was not worth the hassle (plus it did not work all that well).

    This new set-up is easy and intuitive, and seems to work better.

    My habit of parking in gear also has me starting in gear...takes a bit getting used to that I have to pull the clutch in AND put on the brakes to get it to crank over.


    Should be getting some of the mods done today, will be taking pics and posting tonight or tomorrow.


    Kevin
    www.DKCustom.com
    Call: 662-252-8828 Text: 662-420-4891
    Email: Support@DKCustomProducts.com


  11. #10
    80+ Posts ELVISTO's Avatar
    Join Date
    Nov 2013
    Location
    UK
    Posts
    75
    Thanks
    0
    Thanked 1 Time in 1 Post

    Default Re: Ongoing 2014 Tri-Glide build-out, lots of pics and thoughts on the differences

    I had the tank lift from you Kevin, but whats the de luxe version ?

  12. #11
    Sponsor
    TrikeTalk Sponsor
    DK Custom Products's Avatar
    Join Date
    Jun 2013
    Location
    Red Banks, MS
    Posts
    9,122
    Thanks
    1
    Thanked 1 Time in 1 Post

    Default Re: Ongoing 2014 Tri-Glide build-out, lots of pics and thoughts on the differences

    Quote Originally Posted by ELVISTO View Post
    I had the tank lift from you Kevin, but whats the de luxe version ?
    The Deluxe option lifts the rear of the tank 1/2". This yields several benefits on the all HD Touring models-

    Even better air flow over the engine
    Easier to see and clean the rear rocker cover
    Keeps the tank more level looking (and the gas gauge less inaccurate)

    Check out this LINK for the before and after pics.

    This is what I got done today-

    Rolled it out in the sun to get some pics of the paint. I guess I should have asked Mary to take the pics, lol, you can see the flake, but it really looks a lot better in person than any of the pics I took.




    Here is how the passenger footboard came, at the highest adjustment-



    I put it on the lowest adjustment (1.5" lower)...now the two higher adjustment holes are showing...one with rust in it already. Will be picking up some plugs to go in those holes.



    Next I installed Marys' Kury adjustable passenger pegs. She uses these a LOT.



    Next I pulled the wheels, Mary cleaned them and taped them off. I then gave them 4 coats of clear. They are drying over night and I'll put them back on tomorrow. Hopefully we'll never have to look at, or clean any more stains off them.



    Next up was getting rid of the stock linkage, which is just plain looking, plus, it is not if it will fail, but when.



    Replaced it with one of our Chrome linkages that has heim joints (that won't fail).




    Last thing I did today was install the Wards Parts Werks FCS fans.



    Will be doing some more over the next week, and will update this thread as I go.
    www.DKCustom.com
    Call: 662-252-8828 Text: 662-420-4891
    Email: Support@DKCustomProducts.com


  13. #12
    80+ Posts ELVISTO's Avatar
    Join Date
    Nov 2013
    Location
    UK
    Posts
    75
    Thanks
    0
    Thanked 1 Time in 1 Post

    Default Re: Ongoing 2014 Tri-Glide build-out, lots of pics and thoughts on the differences

    I'll order the rear tank lift parts later today,

    Thanks for the writeup and pictures

  14. #13
    Sponsor
    TrikeTalk Sponsor
    DK Custom Products's Avatar
    Join Date
    Jun 2013
    Location
    Red Banks, MS
    Posts
    9,122
    Thanks
    1
    Thanked 1 Time in 1 Post

    Default Re: Ongoing 2014 Tri-Glide build-out, lots of pics and thoughts on the differences

    Quote Originally Posted by ELVISTO View Post
    I'll order the rear tank lift parts later today,

    Thanks for the writeup and pictures
    Cool!

    I got 60 more miles in today. Took the long way home from the shop.

    I'm looking forward to being done with the break-in miles. There is definitely more power there than the '11. Just can't tell how much with being easy on the wrist and RPM's.

    Need to get the tank lift and Deluxe option installed...not used to that air coming over the top of the tank, makes for a bit of buffeting...plus I want that air going under the tank across the engine.

    These were the first miles I put on it with the Wards Parts Werks fans installed.

    After it was warmed up I let it sit for about 10 minutes idling, the radiator fans never kicked on...last ride (without the Wards fans) the radiator fans kicked on after about 5 minutes of idling.

    My HD brand dipstick oil temp gauge went defective today...3 days after it was purchased.
    So I had no way to see what the oil temps were doing.

    From the pic below you can see I installed my backrest, air hawk and sheepskin. Definitely better for me...but need to get the handlebars made and installed...those puppies are just too short for me.

    Also, hopefully you can't see in the pic that Mary put some 3M film on the fenders, the plastic between the fenders and the side covers, and also film on the side covers.



    Here's a better pic of the Wards fans and the DK Custom Shift Linkage-



    Here's a pic of the wheel after being rattle canned with clear. Looks good, hope it holds up.



    Still have quite a few things to do on the list, but making progress.

    Kevin
    www.DKCustom.com
    Call: 662-252-8828 Text: 662-420-4891
    Email: Support@DKCustomProducts.com


  15. #14
    60+ Posts chiefbuc's Avatar
    Join Date
    Dec 2010
    Location
    Versailles, Missouri, USA
    Posts
    60
    Thanks
    0
    Thanked 0 Times in 0 Posts

    Default Re: Ongoing 2014 Tri-Glide build-out, lots of pics and thoughts on the differences

    During that long idle period, did your EIMTS go active? My trike does almost every time when at idle.

    Your trike is looking great. Have a good one.

  16. #15
    Sponsor
    TrikeTalk Sponsor
    DK Custom Products's Avatar
    Join Date
    Jun 2013
    Location
    Red Banks, MS
    Posts
    9,122
    Thanks
    1
    Thanked 1 Time in 1 Post

    Default Re: Ongoing 2014 Tri-Glide build-out, lots of pics and thoughts on the differences

    Quote Originally Posted by chiefbuc View Post
    During that long idle period, did your EIMTS go active? My trike does almost every time when at idle.

    Your trike is looking great. Have a good one.
    It would have, but I disabled it.

    The book says, and the tech at the dealership said, that the EITMS will not go active until the engine temp (actually the rear of the front cylinder temp) is 284*.

    I have found that to be inaccurate information. On my TG, and on two different 2014 Street Glides I have worked on, I found that even if the engine temp is 180*, but the ambient temp is above 80*, the EITMS will activate.

    Unless there is a patch for that (and I will be chasing that information down), if you live anywhere that it is warm, then the EITMS is going to activate everytime you come to a stop.

    I found it irritating and unnecessary, so it is currently disabled.

    If I can get it to function correctly, where it only activate if the engine is 284* or higher, then I will enable it.

    Kevin
    www.DKCustom.com
    Call: 662-252-8828 Text: 662-420-4891
    Email: Support@DKCustomProducts.com


  17. DKCustoms postbit
  18. #16
    60+ Posts chiefbuc's Avatar
    Join Date
    Dec 2010
    Location
    Versailles, Missouri, USA
    Posts
    60
    Thanks
    0
    Thanked 0 Times in 0 Posts

    Default Re: Ongoing 2014 Tri-Glide build-out, lots of pics and thoughts on the differences

    I was wondering if the EIMTS went active your Wards fans functioning. It looks like I may be purchasing these fans. Thanks. Have a good day.

  19. #17
    10000+ Posts skuuter's Avatar
    Join Date
    Apr 2010
    Location
    Estill Springs, Tn, USA
    Posts
    10,184
    Thanks
    0
    Thanked 6 Times in 6 Posts

    Default Re: Ongoing 2014 Tri-Glide build-out, lots of pics and thoughts on the differences

    Great Pics, Great Info.....Great Looking Trike....Thanks.....
    ..if it has WHEELS, I'm in...ThumbUp

  20. #18
    Sponsor
    TrikeTalk Sponsor
    DK Custom Products's Avatar
    Join Date
    Jun 2013
    Location
    Red Banks, MS
    Posts
    9,122
    Thanks
    1
    Thanked 1 Time in 1 Post

    Default Re: Ongoing 2014 Tri-Glide build-out, lots of pics and thoughts on the differences

    Quote Originally Posted by chiefbuc View Post
    I was wondering if the EIMTS went active your Wards fans functioning. It looks like I may be purchasing these fans. Thanks. Have a good day.
    Yes, it would go active with the fans on and with the fans off....because it was activating independent of the engine temperature.

    Quote Originally Posted by skuuter View Post
    Great Pics, Great Info.....Great Looking Trike....Thanks.....
    Thanks!

    This week has flown by!

    Have not done much on the list. Today, after work I put the floorboard extensions on.

    I ordered the kit from VTwinGoodies.com I knew it would only fit the right side and I would have to do some other work to make the left side work because of the parking brake.

    But I thought it would be a good jumping off point.

    This is the 4th kit I've purchased from VTwinGoodies, as always, it was delivered quickly.

    It does not seem like moving the floorboards out 1" would make that big a difference....but it really is Much more comfortable for me.

    Here is the right side stock- Foot is way up against the engine/pipes.



    This is a pic of the parts from VTwinGoodies-



    Here is a pic of the right side with one of the round spacers and one of the squarish spacers installed.

    The hardware with the kit is Grade 8.

    Much better, I can move my foot around more, and much less likely to get my boot heel scuffing up the exhaust shield.



    Here is a pic of the left side in stock form. It does not feel as tight against the engine/primary, but there is still very little room to move my foot around.



    I figured I was going to have to pull the bolts, see what I needed in the way of spacers and longer bolts, & then make a trip to the hardware store in the morning.

    I was very happy to see there were only 3 bolts and all the same size.



    I was able to use the second round spacer &amp;amp; a bolt from the VTwinGoodies kit. I thought I was going to have to go to the hardware store and get a couple of spacers and grade 8 bolts. Then I realized that the Sportster Passenger Comfort Peg Extensions we make would probably fit. They did!

    So I was able to get it all bolted up (with lock washers and thread-locker) this evening. No need to go to the hardware store in the morning.

    Here's a pic of the left side finished.



    It went much easier than I thought it would.

    There was plenty of wire for the parking brake to move out 1"

    Tomorrow and Sunday I will be getting more items done on my list.

    Kevin
    www.DKCustom.com
    Call: 662-252-8828 Text: 662-420-4891
    Email: Support@DKCustomProducts.com


  21. #19
    90+ Posts woodmnctry's Avatar
    Join Date
    Aug 2013
    Location
    mountains, Co, USA
    Posts
    96
    Thanks
    0
    Thanked 0 Times in 0 Posts

    Default Re: Ongoing 2014 Tri-Glide build-out, lots of pics and thoughts on the differences

    Two ???'s --- how does one disable the EIMTS ?

    and


    What brand of clearcoat did you use on the wheels ?? --- was thinking about taking them to a local auto paint shop and having them do that and then noticed you used a rattle can approach
    TKS

    G

  22. #20
    100+ Posts MontgomeryLittle's Avatar
    Join Date
    May 2011
    Location
    Murfreesboro Tn. USA
    Posts
    111
    Thanks
    0
    Thanked 0 Times in 0 Posts

    Default Re: Ongoing 2014 Tri-Glide build-out, lots of pics and thoughts on the differences

    That trike looks great. If my wife sees that blue I may be riding a 2011 Vivid Black Tri Glide and selling the Electra Police model. She been hounding me to get rid of all my 2 wheelers and get a trike anyway. Maybe its time to listen.

    Quote Originally Posted by woodmnctry View Post
    Two ???'s --- how does one disable the EIMTS
    Not to butt in but this is the procedure from H-D.:

    EITMS can be enabled or disabled by performing the following procedure.
    1. Turn the ignition switch to the ON position and push the engine OFF/RUN switch on the right handlebar to the RUN position (the motorcycle may be running or not running).
    2. Push the throttle to roll-off position and hold.
    3. See Instrument Lamps. After approximately 3 seconds, the cruise indicator lamp will either flash green (EITMS enabled) or orange (EITMS disabled).
      NOTE:
      A flashing lamp indicates the EITMS setting. A solid (non-flashing) lamp indicates the cruise control setting.
    4. Repeat the procedure as needed to enable or disable EITMS.
    [SIGPIC][/SIGPIC]

Page 1 of 9 1 2 3 4 5 6 7 8 9 LastLast

Similar Threads

  1. 06 Twin Cam 120" Build (Lots of Pictures)
    By msocko3 in forum Harley Trike Conversions
    Replies: 22
    Last Post: 05-26-2013, 06:09 AM
  2. trike build more pics
    By ade747 in forum General Discussion
    Replies: 2
    Last Post: 04-01-2013, 09:20 AM
  3. Pics of new trike build
    By Dwight in forum Harley Trike Conversions
    Replies: 4
    Last Post: 04-01-2011, 10:25 PM
  4. Some Build Pics
    By Tango in forum General Discussion
    Replies: 3
    Last Post: 02-10-2010, 12:08 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •