After initial installation and
Everything is good. Is it
Really necessary to check
Again if you dropout and
Rehook?
After initial installation and
Everything is good. Is it
Really necessary to check
Again if you dropout and
Rehook?
Thanks
I just reinstalled mine after riding on 2 wheels for a while and for some reason the right side was off by nearly 1/4 inch... I must have hit a good size pot hole or something before I removed it before... The left side was still dead on...
It's probably a good idea to check it when you re-install it just to make sure... It obly take a minute to check...
I simply bungee a piece of 3/4" alumimum channel to the outside of the bike wheel and a bungee a piece of 3/4" square aluminum stock to the outside of the trike wheel... Then just stretch a measuring tape across and check front and back dimensions...
Les
I called factory and they do not have any fender bras
to protect from stone and rock. anybody know where
I can get such a thing?
thanks
If your wife has a sewing machine have her make them for you... I'm trying to talk my wife into that very thing...
Les