NH Trikers

[56Elwood]

So how can I get a shirt (or two, gotta hook up the co-rider)?

 

[Rosy]

I will have to find out what prices the shirts are going to be...You see those shirts were made a couple years ago..As I was working on an idea for the club..
The shirts were pricy, as I recalled..
I will go to the printers and ask them the price of shirts, since they should have the patch in their computer, it will be easier for them to embroider. As you can see in the picture, they are embroidered not silk screening..
Let you know what I find out and cost..
You see each shirt is individually done, because each has a name on it. Like ours...Rosy..Janice..
Rosy

 

[Rosy]

 

[DblTrbl]

I may know someone with an embroidery machine.....I just need to remember who it is...LOL I'll ask around and let you know.

 

[leo3wheel]

Fellow biker opened a business last year.

https://www.etsy.com/shop/rockingmysewjo

 

[Hot Rod 1]

Where were all you Granite State Trikers today when I was in Keene picking up my Roadsmith ? I did happen to see DblTrbl's trike while I was there. It looked pretty sharp ! Especially the cylinder head covers. I didn't know my trike had been hanging out with his for the last month.

 

[Rosy]

Where were all you Granite State Trikers today when I was in Keene picking up my Roadsmith ? I did happen to see DblTrbl's trike while I was there. It looked pretty sharp ! Especially the cylinder head covers. I didn't know my trike had been hanging out with his for the last month.

At least your trike came out and played. Someone is still waiting for that day to happen. It's been a long time.
Rosy

 

[peteg59]

Great design Rosy. ThumbUp
The trike pictured is, as we all know, a goldwing; however it is generic enough in its embroidered form as to be recognized as a trike vs a 2 wheeled mc to the general population.
What I'm trying to say is most folks will see it as a trike, not realizing it to be a goldwing.
IMO no need to create the shirt/garments with brand specific details...

 

[Rosy]

Thanks Pete, you are correct, it is a Goldwing Hannigan trike, like what I have. I know, people all ready have said..Honda..Honda..Honda...But, how do you make a generic trike? I thought about it, but with my limited design skills, I went with what I had.
How many design patches would I have to design to get every trike...Hundredths..
So, it is a trike, it is our state...GST...But, like all other request, not many people in our state has taken any interest, so, it will be a very small club, and it could be, because we are so far apart, it will be very difficult to get everybody involved in the club...
One thing is clear, NH will be hosting the Northeast Gathering this year and hopefully we will showcase our little state's good things, from the shinning sea to our green mountains.
Go Granite State!
Rosy

 

[DblTrbl]

Where were all you Granite State Trikers today when I was in Keene picking up my Roadsmith ? I did happen to see DblTrbl's trike while I was there. It looked pretty sharp ! Especially the cylinder head covers. I didn't know my trike had been hanging out with his for the last month.

Congrats on getting your Trike Hot Rod.

Another delivery date has come and gone for mine. Several emails, text and phone calls have gone unanswered. I even stopped in the shop on Thursday and he wasn't there.
I'm disappointed beyond believe that he hasn't even taken care of the couple of minor things......he is a know procrastinator and is practicing this method on my bike. I'm really not sure how much longer I can be patient....getting tougher with each beautiful day..

 

[Rosy]

That is completely wrong when you are in business!
Rosy

 

[peteg59]

Congrats on getting your Trike Hot Rod.

Another delivery date has come and gone for mine. Several emails, text and phone calls have gone unanswered. I even stopped in the shop on Thursday and he wasn't there.
I'm disappointed beyond believe that he hasn't even taken care of the couple of minor things......he is a know procrastinator and is practicing this method on my bike. I'm really not sure how much longer I can be patient....getting tougher with each beautiful day..

I thought you had the trike shipped back to the kit manufacturer for resolution of issues?

 

[DblTrbl]

That is completely wrong when you are in business!
Rosy

Rosy, when I finally get my trike I plan on cutting ALL ties with this :qpnmt:. I would like to get with you and ride to Windham and meet the folks that take care of you and your ride. I will see if the will do any warrantee work if needed.

- - - Updated - - -

I thought you had the trike shipped back to the kit manufacturer for resolution of issues?

Pete I'll explain everything when I see you. Right now I'm waiting for my front rim to get back. It was sent to CA to get chromed. Of course this shouldn't be the reason for any delay since I requested a front chrome rim in Oct 2014 and again in the fall of 2015 when I dropped the trike off to be finished.

I'm seriously considering contacting an attorney to check my options.

 

[Rosy]

Will let you know when I take a ride to Widham. Got a second recall on the brake system for the Honda.
Also need to have front shock extensions put on my trike, as it never was put on from the factory. Don't know why it was never done, but was recommended to have it done. I wonder how much better the travel of the shocks will be, as they are good now.
Great people, pricey, but fair, strictly by the labor book.
They also get the job done as promised, when parts are available from local car dealers. Hannigan uses Honda car parts on their brakes, which we had a problem a few years ago getting. Not their fault!
Rosy

 

[DblTrbl]

Rosy, when I finally get my trike I plan on cutting ALL ties with this :qpnmt:. I would like to get with you and ride to Windham and meet the folks that take care of you and your ride. I will see if the will do any warrantee work if needed.

- - - Updated - - -



Pete I'll explain everything when I see you. Right now I'm waiting for my front rim to get back. It was sent to CA to get chromed. Of course this shouldn't be the reason for any delay since I requested a front chrome rim in Oct 2014 and again in the fall of 2015 when I dropped the trike off to be finished.

I'm seriously considering contacting an attorney to check my options.

Pete, talked to dealer today. He said my rim was shipped on Friday sooooo, it should be at his shop Thru/Fri.... I told him to just get it mounted and do my fender tips (rear).....Told him to forget everything else because I'm tired of waiting for my trike. I told him I will make sure the other stuff gets completed.... Hopefully next week I can get my trike and settle the bill. It should be interesting to see what he plans on charging me for waiting 20 months for a build that he never finished.

 

[peteg59]

Hopefully you get your trike back soon Dennis, & you can put your experience with this vendor? behind you for good...

We need to have a "Season Kickoff" GST ride here in NH now that the snow is gone.
Are you there Rosy?

 

[Rosy]

I am still here, for a while, then heading West!
Yes, we need to get a ride in, one of these days. We will even invite Dennis, with his two wheels! LOL
Rosy

 

[DblTrbl]

I am still here, for a while, then heading West!
Yes, we need to get a ride in, one of these days. We will even invite Dennis, with his two wheels! LOL
Rosy

NICE Rosy...NICE...LOL

Well even the two wheeler is in the shop getting a tune up. They left me a message yesterday while I was sleeping. I will call them this morning and maybe the news is the bike is ready for pickup. The bad news would be they found something wrong or due to the pipes, it won't pass inspection due to the Db level. It has a Hypercharger and Hard Chrome pipes.

If it's ready then I will need to find a ride or wait until the weekend but sure would hate to miss a 70* day of riding!!

 

[Rosy]

Still trying to catch up on things around the house. Yesterday's thing was a clogged bath sink drain, need to replace the galvanize pipe which has been in the house since the 50s when it was built! Going to put in a P-drain and make the run in plastic.
So, Janice is walking around the house saying, is it ever going to get warm? Good point. Yesterday it looked like it was warm, but the wind was very chilly!
Hope you get your bike back, and yes. dBs in NH are going to be in forced, don't go to Hampton Beach or the beaches, they stop all bikes/trikes and check.
Rosy

 

[DblTrbl]

I don't like riding around the beaches....just too many people not paying attention.

The "certified state inspection station" passed my bike with the current setup so if I am ticketed I will fight it.

The bike it ready for pickup. I will get it at 9:30 this morning and of course I must take if for a shakedown cruise. I'm thinking 100 miles or so should give me a good idea of it's handling.

I already know I prefer 3 wheels and I did buy this 2 wheeler with the intent to sell. Hell, I may even use it as part of my final payment on the trike if/when we settle that deal.

- - - Updated - - -

Pete, I'm getting the bike this morning at 9:30 and then going for a ride to check it out. I have only ridden it from my house to the shop for a tune up and inspection (7 miles).

PM me and let me know if you will be around nearby in the morning and I'll try to swing by and say HI.

Maybe we can get Rosy to hit Benedict's for breakfast some morning?