***Introductory Special on Velocity Stack Intakes from DK Custom***

[DK Custom Products]

Introducing the V-STACK An Uncompromising Velocity Stack Intake Four Finishes Two Lengths Raw Stainless~Black Powder Raw Aluminum or Mirror Finish Aluminum 1.5" or 3"
10% Introduction Savings March 6-17, 2015 Use Coupon Code: Save10 In Checkout Or Call In Your Order at 662.252.8828

See All the Photos & Details by Clicking V-STACK

[DK Custom Products]

You can upgrade to the Outlaw V-Stack Air Intake Complete System without doing any dyno work or adding tuners IF you leave the stock exhaust in place.




Kelsey

[DK Custom Products]

This intake is as free flowing as you can get and you have the option of the 1.5'' V-Stack or the 3'' V-Stack!





Kelsey

[DK Custom Products]

SAVE WHILE YOU CAN




Kelsey

[Papa Zook]

I like! My Dyna would look good wearing one of these.

[FuzzyWuzHe]

Do you need to put a rain coat on it when it rains?

Would it be wise to re auto tune after installing?

[DK Custom Products]

Do you need to put a rain coat on it when it rains?

Would it be wise to re auto tune after installing?

Heavy rain would be good to have a rain sock.

If you already have a free flowing A/C, no new tune is needed.

If your replacing the stock A/C and still have the stock exhaust, no new tune is needed.

With your Power Vision, would not hurt to do an auto-tune, but I doubt you will see much change in the tune from the auto-tune if you're going from another free flowing intake to this one.

There is an exception...if you currently have a free flowing A/C, but it is still dumping the crankcase pressure into the air cleaner...when you switch to the V-Stack, you are now putting only clean, cooler, more oxygen rich air into the combustion chambers. While you do not Need (no damage will occur if you don't) to do a new tune, it would certainly be beneficial...you now have more oxygen, and that means you can have a stronger combustion stroke!

Kevin

Kevin

[FuzzyWuzHe]

Does it come with a rain sock? Or do you know of one that fits? We don't get much rain here in the "high desert", but we usually do when I'm on a trip.

I have a sock that fits the HD stage one air cleaner, but I doubt that will fit.

[DK Custom Products]

Does it come with a rain sock? Or do you know of one that fits? We don't get much rain here in the "high desert", but we usually do when I'm on a trip.

I have a sock that fits the HD stage one air cleaner, but I doubt that will fit.

They currently do not come with one. Devin and Kevin(DK) are in the process in looking for a Rain Sock now that will go with the V-Stack. You can check back with us or even if you would like you can call the office and we can contact you when we do find one

Kelsey

- - - Updated - - -




Kelsey

[FuzzyWuzHe]

Heavy rain would be good to have a rain sock.

If you already have a free flowing A/C, no new tune is needed.

If your replacing the stock A/C and still have the stock exhaust, no new tune is needed.

With your Power Vision, would not hurt to do an auto-tune, but I doubt you will see much change in the tune from the auto-tune if you're going from another free flowing intake to this one.

There is an exception...if you currently have a free flowing A/C, but it is still dumping the crankcase pressure into the air cleaner...when you switch to the V-Stack, you are now putting only clean, cooler, more oxygen rich air into the combustion chambers. While you do not Need (no damage will occur if you don't) to do a new tune, it would certainly be beneficial...you now have more oxygen, and that means you can have a stronger combustion stroke!

Kevin

Kevin

With this ac, where does the crank case dump to?

[DK Custom Products]

Bump Bump...

[Keystone]

After seeing them on a bike I can say they are real well made and look great!

[DK Custom Products]

With this ac, where does the crank case dump to?

There are several choice in external breathers- you can see them at the following links

http://www.dkcustomproducts.com/Prem...DIS-BRT-TC.htm

http://www.dkcustomproducts.com/Prem...DIS-BRT-TC.htm

or the Black, Polished Aluminum, or Brass Breather Bolts at this link-

http://www.dkcustomproducts.com/All-...ngines_c76.htm

Kevin