Advice please. Did inspection only to find broken frame. 2001 ultra classic champion conversion. Frame is broken in rear area on tube that goes to the tour pack mount and top part of axle mount. Advice please.
Advice please. Did inspection only to find broken frame. 2001 ultra classic champion conversion. Frame is broken in rear area on tube that goes to the tour pack mount and top part of axle mount. Advice please.
www.DKCustom.com
Gear Up & Ride in! DK Custom 4th Annual Open House, June 8th. 🏍️ Click HERE For The Lowdown.
Call: 662-252-8828 Text: 662-420-4891
Email: Support@DKCustomProducts.com
how long has it been a trike? If for awhile then metal fatigue is probably the issue. That area was not designed for what it has had to do as a trike. I would take it to a welding shop put at back together then were possible throw a little reinforcing at it. The go and ride.
Stallion #406 // 2013 Tri-Glide
First question?
Is this part of the framework built by champion?
Or part of the bikes frame?
I cant picture what you mean by? " Frame is broken in rear area on tube that goes to the tour pack mount and (top part of axle mount.")
I fail to see what one has to do with the other?
Please don't get the idea im running you down,Perhaps you could be more clear for this dummy?
One thing I know is that Champion makes a damn good product and they will likely stand behind it?
Did your installer drill some holes or add a weld he shouldn't have with the wrong type welding wire? Or in effect welding on a cross beam? Thereby weakening the metal?
When I built mine All these parts were a bolt on?
You can download Instructions from Champions website to see if anything was altered.
Enjoy life now!----------IT HAS AN EXPERATION DATE
1989 HARLEY DAVIDSON TOUR GLIDE ULTRA CHAMPION- A WOLF IN SHEEP'S CLOTHING-(CUT YOUR WOLF LOOSE!)
the difference between a good trike and a bad one depends entirely on the integrity of it's builder!
Had this part of the frame break on my 05 ultra. 133k on it. Drilled 1/4 hole in each part, inserted a piece of 1" stock in busted piece. welded it in place thru hole. lined up with frame and welded into place thru hole in main frame. after checking alignment welded around break. small are that we could not get. used a mig welder no problems.
On one of my gold wings (04 I think, but might of been the 01), there was a safety recall for the frame ... the fix ... they took it apart ... laid it on it's side and welded the problem .. so if ya got a good welder, anything can be done.
if the tubing is in a "critical" stress area; I strongly suggest (if you can) have someone TIG WELD that area that needs welding. that way, you won't have to worry about it happening again.
TBEAR
2010 Triglide Harley Davidson
V&H Exhaust,True Duals, Big Sucker Ac,,557 S&S Cam,SE Compensator 2014, oil cooler,EBC r.brakes,Progressive air-shocks,Floorboard extensions,rear fender bras, Dynoed,krome-werks 2+2 bars, and a sheep wool butt protector....
Welding on a frame. I suggest using a tig. A mig can get it to hot and cause another break farther back from stress.
http://i25.photobucket.com/albums/c5...an_cross_f.jpg
20015 freewheeler
2005 113 pro twin super glide
2010 ss106 wide glide
2004 1800 VTX custom
2012 GW RS
A local Softail with a DFT kit on it broke the main frame under the fuel tank back about 7" from the front end. They welded the frame back together then put a 1/3 "shell" fitted tubing under the frame tube full length. They did that to keep from developing a stiff area in the frame. It was skip welded with a tig .
It has been about three years since that repair & no problems so far.
It is caused from the extra stress from the kit But also the wheelies the guy was doing all the time. He couldn't seem to ride without pulling the front wheel up at least once.
A different owner now.
2012 Tri-Glide, DK's Lift Brackets, 416 Progressive shocks, S&S Power Tune Duals Header, V&H Monster Rounds , HD Ventelator AC, FCS Fans, Tank raised 2", Dual Halogen Headlight, L.R.S 10" Tinted Windshield, Hammock Seat, Tourpak 1"raise & 2" back & Light conversion, PV w/Target Tune, Bagger Bar, Harley 2" pullback bars, Running AmsOil in all Boxes.
Thanks for the responses. Champion trike kit is an awesome bolt on kit even tho their customer service has issues. 13000 miles 3 years on conversion. It is the Harley frame that broke and I showed pics to several bike mechanics (tried loading pics but no luck)and they all could not believe the frame broke where it did. I was able to get connected with an experienced welder and a frame maker. He thinks it's an easy fix by seeing pics but still has to physically see it. He says he will reinforce it and be stronger than ever. I really enjoy talking to the old timers because they are so full of knowledge. Hope it is repairable. New frame $2200. Possible insurance claim?
Frame is repaired. Tig welded by Kettle Moraine Welders, West Bend, Wi. Unbelievably impressive job. They are absolute perfectionist. Totally pleased. Repaired cracked and reinforced. They were also surprised to see cracked in frame where it was located, like I said "was". Back on the road soon
Good news ... more trikes on the road is always good