Trike Water Bottle Holder

[DCaliendo]

Someone posted a link to a water bottle holder that attached without drilling holes in the side panels. I lost the link. Does anyone still have it?

Thanks.

D. Caliendo

[DK Custom Products]

Someone posted a link to a water bottle holder that attached without drilling holes in the side panels. I lost the link. Does anyone still have it?

Thanks.

D. Caliendo

Not sure exactly which link you may have had, but this is the water bottle holder that Kevin (DK) uses on his Trike. Hope this can be some help to you

http://www.kruzerkaddy.com/products-page/all-products/

Kelsey

[DCaliendo]

It was a unit that attached to the panel between the body of the bike and the fender on the flat panel there. It attached with adhesive strips and showed a guy standing on top the the holders after there were attached to the bike. No holes to drill and seemed to be secure.

Thanks for the reply and I'll check through them.

Regards,

Richard .................

[DTR 11TG]

It was a unit that attached to the panel between the body of the bike and the fender on the flat panel there. It attached with adhesive strips and showed a guy standing on top the the holders after there were attached to the bike. No holes to drill and seemed to be secure.

Thanks for the reply and I'll check through them.

Regards,

Richard .................

are you talking about this pic



if that is the correct pic, check on this web site

http://www.seethroughbraz.com/

[DCaliendo]

[DTR 11TG]

That's not the same one but it will sure as heck do the job. Really appreciate you finding that link and posting it. I have been going crazy trying to find something like this to appease the rear seat driver. She misses the holders that we had on the Ultra Glide which attached to the guard rails.

Much appreciated.

DCaliendo

[MHHillman]

I have the suzy cup holder and it vibrates so much if you do not have a water bottle in it. Looking for a replacement now

[DCaliendo]

I have the suzy cup holder and it vibrates so much if you do not have a water bottle in it. Looking for a replacement now

Not familiar with that one & Google didn't help much. Who sells it?

[MHHillman]

sorry typed to fast. I meant the kruzer caddie. Bought it at Scottsdale Harley

[Postal Trucker]

I have the Chubby Cup Jr. mounted to the left control housing. It is a solid mount, it can also be mounted to the handle bars. Either way it has different options for mounting and positions and as I've said is solid.

[hogcowboy]

I tired one that looked like it would keep a bottle level in the twisties. Don't waste your money. Piece of dung. If you take one swig out it's still top heavy and at interstate speed will dump the bottle. This one from Amazon. I think the free shipping tricked me.

[FuzzyWuzHe]

The Glassact. Com one has been on my rides since 2001 ... Same one actually which speaks to it's longevity ... Once a year I order me a new cup and lid ... Cathy gets a new one as needed ... I should mention that this cup is my everyday cup around the house ... It's insulated minimal sweating and unless you drop it and don't pick it up right away, virtually spill proof ... It has a vent and straw, both with covers. Well worth the money.

[Rod69]

Got my bottle and holder through Hog Trough.com. Comes with new doors for the storage boxes on the front rails. You can replace your snap on doors with locking doors with this bottle and have more secure storage.

www.hogtrough.com

[Skeet7373]

To keep your water cold, the Butler Cup is the one to use. I have mine attached at the switch housing right side. Yep, its big but if I want a ice tea from DD, the medium DDcup will fit perfectly in the Butler, keeping the tea nice and cold. I have had ice in the Butler for a good 4-5 hours. Thicker frozen ice stays all day. They make it so it can be attached for the passenger. 20 oz cup and 32oz cup I also buy a new cup, straw and lid this year. <a href="http://www.glassact.com" target="_blank">www.glassact.com</a>

[FuzzyWuzHe]

To keep your water cold, the Butler Cup is the one to use. I have mine attached at the switch housing right side. Yep, its big but if I want a ice tea from DD, the medium DDcup will fit perfectly in the Butler, keeping the tea nice and cold. I have had ice in the Butler for a good 4-5 hours. Thicker frozen ice stays all day. They make it so it can be attached for the passenger. 20 oz cup and 32oz cup I also buy a new cup, straw and lid this year. www.glassact.com

The only issue I have with the butler is if you put a carbonated drink in it on the Harley ... vibration and carbonation don't mix ... if the cup is full it will start dribbling out the vent onto the tank.

[azyjjk]

Not sure exactly which link you may have had, but this is the water bottle holder that Kevin (DK) uses on his Trike. Hope this can be some help to you

http://www.kruzerkaddy.com/products-page/all-products/

Kelsey

Where is this mounted? My wife got one for her 14 TG but with the hydraulic clutch I didn't have enough room to mount it on the left handlebar. It will fit just fine on my 13.

[dirtdobber]

It should fit with the Hyd. Clutch. I make mu own mount for the kuzzer kady. I have mine on the front brake housing. I also use a stainless cup holder I got at Walmart. When riding I do not carry hot drinks. The cup has a straw in side so I just uset the straw, will not leak or spill.

been using this for many years. Are you using the resvoior or bars. Don't care for the bar mount. If it moves to much just use a o ring between the mount.

You can still move it but it will stop it from moving when riding.

[AZTriGlide]

Love my Kury cup holder. Holds my 32 oz Rubbermaid cup.

[azyjjk]

It should fit with the Hyd. Clutch. I make mu own mount for the kuzzer kady. I have mine on the front brake housing. I also use a stainless cup holder I got at Walmart. When riding I do not carry hot drinks. The cup has a straw in side so I just uset the straw, will not leak or spill.

been using this for many years. Are you using the resvoior or bars. Don't care for the bar mount. If it moves to much just use a o ring between the mount.

You can still move it but it will stop it from moving when riding.

On my 13 I have it mounted at the bend on the handlebar, but there is no room there with the cable at the front of the hyd.

clutch. Can't picture what you mean about the front brake housing.

[GARYD]

This is the insulated bottle I've been using for over 7 years. I started out with the 12 oz one and was hoping to find a larger one. Saw this at Target. You push the button and the lid swings open to reveal a rubber straw. You can drink without taking your eyes off the road which is what I really like. Cold drinks have stayed cold for at least 8 hours. Almost indestructible-had one fall while doing 65 mph.....did some scratches.

Will never sweat or leak-even if held upside down and shaken.

Fits perfectly in my KruzerKaddy that bolts to the hand brake bracket. I bought 4 of these just in case I ever need another one and find out they stopped making them. Paranoid I guess.

I found out the hard way about carbonated beverages.

Ever have a fire hose hit you in the face??



http://www.target.com/p/thermos-stai...3&term=thermos

[Burnerboy]

The only issue I have with the butler is if you put a carbonated drink in it on the Harley ... vibration and carbonation don't mix ... if the cup is full it will start dribbling out the vent onto the tank.

EASY REMEDY: Get rid of the Harley and buy a Goldwing (NO VIBRATIONS) OR quit putting carbonated drinks in the cup! easy peesy!

Sorry had to offer my advice!!