any westward go-4 owners?

[mrwendal]

I have scored a g0-4 and i wanted to know if anyone has a lead on serviice manual for 1993 with the 1.3 engine?

[Sidecars]

Did you find one?

[R J REEVES]

I have a 2003 and would love to buy or find any manuals I can find . I am in Tn. and would like to know what kind of oil filter to use. rjreeves@charetr.net 931-247-4502

[WildBillH]

Guess what I saw today. 96 Ford Fiesta engine
Sacramento

[fuzzy2319]

I just picked up a 1997 from a man in NY
It's a great toy but I need to find out how to kill the governor, in Maryland 45 MPH will get me run over
fuzzy2319

[ben2go]

I just picked up a 1997 from a man in NY
It's a great toy but I need to find out how to kill the governor, in Maryland 45 MPH will get me run over
fuzzy2319

I thought they were governed because they were unsafe at high speed.

[MLGunn]

I have a GO-4 Interceptor, 1999. I drive it 20 miles to and from work every day. I'm in need of shocks all around. What's the part number and or size for front and rear? Can you help? Thanks.

Marilyn Gunn

[BlueTrinity]

Look here ! pepper


GO-4 WESTWARD INTERCEPTOR PARTS AND SERVICE MANUAL | eBay

[MLGunn]

I've got the manuals, but nowhere is there any mention of the size of the shocks.

[ben2go]

I've got the manuals, but nowhere is there any mention of the size of the shocks.

If you had them off you could compare them to other moto and auto shocks.I'm not familiar with the suspension set up on those trikes.There may even be a P/N on them.

[nortom]

Have 1996 go 4. Silly little cars website has the most info I have found. They have manual w part numbers but they are westward numbers .

- - - Updated - - -

Shocks on 1996 look like motorcycle units with preload adjustor at bottom same as on my 650 just bigger

[nortom]

My 1996 Go 4 was a challenge over 40. Found stearing head was a little loose when I jacked the front end up. The manual said preload castle nut to 80 ft lb. Checked mine it was barely finger tight. Made the adjustment now it is rock solid at 60 mph. Castle nut is accessable by lifting the top of the dashboard. Was a very easy fix

[nortom]

1996 Go 4 stearing stabilizer. The stearing on these things stop to stop is extream, much more than my motorcycle. Needed @ 7 " + of travel. Didnt find a stabilizer with that much travel in my price range. Came up with position that made for much less travel. Standing in front of the vehicle look between the forks you will see a tab with a hole in it on the frame and on the lower fork support are two holes @ 4" apart. I am an electrician and thought of how we build brackets to run conduit. Unistrut makes pre drilled brackets to bolt their stuf together. I found a 20 deg 2 hole that worked for the bottom and 2 - 4 hole connectors for the forks. The forks have a recess so I needed a spacer. Unistrut to the rescue, I used their square washers
1/4" thick, 1 on one side, 2 on the other. Bolt to the 2 holes in the forks and line up the ends forward of the forks for 1 bolt. The Unistrut I used has 1/2" holes the stearing stabilizer is 3/8". I used rubber tubing to align everything in the holes. A VW bus stearing stabilizer has shockabsorber type 1 bolt ends and is made for a much heaver vehicle. The amount of travel this location allows is minimal so the stiff stabilizer works ok.

[nortom]

Repair stories please

- - - Updated - - -

Westward used off the shelf parts. Does anyone have list of what they are?

- - - Updated - - -

Silly little cars site has some info and lots of pictures