150 Most Recent Posts

Thread AuthorPostersPost AuthorForumThread/Post Link
Aging Gracefully1Aging GracefullyHarley Freewheeler /...switching Tri-Glide for Road Glide ...
agapsdiver5trike ladyHarley Freewheeler /...Completed Project: 2024 RG3 added T...
David35754WarpedThe Gun EnthusiastJust Gun Memes
agapsdiver5GorillaHarley Freewheeler /...Completed Project: 2024 RG3 added T...
Gfitzz536ROAD DOGGeneral Harley Chatengine oil transfer to primary side...
Gfitzz536Gfitzz53General Harley Chatengine oil transfer to primary side...
Amputee552ultrafxrHarley Tri GlideGas tank removal to replace handleb...
Rawhideken5ROAD DOGHarley Tri Glide2024 Tri glide
Amputee552Amputee55Harley Tri GlideGas tank removal to replace handleb...
Rawhideken5Peter A.Harley Tri Glide2024 Tri glide
Rawhideken5RawhidekenHarley Tri Glide2024 Tri glide
agapsdiver5agapsdiverHarley Freewheeler /...Completed Project: 2024 RG3 added T...
David35754rhino 2The Gun EnthusiastJust Gun Memes
David35754SullyThe Gun EnthusiastJust Gun Memes
SHARKDIVER2SHARKDIVERGeneral Harley Chatsuper shox
Rawhideken5Old Road DogHarley Tri Glide2024 Tri glide
Mykneesbehurtin9NotgrownupHarley Tri GlideTri Glide Reverse Motor
MDO100Freewheeling_Dude!Harley Freewheeler /...What Did You Do To Your Freewheeler...
Rawhideken10ol' schoolNew Member Introduct...Hi all new to this site ! hope I do...
consitter75Papa ZookGeneral DiscussionLate nighters---unite!!!
consitter75rhino 2General DiscussionLate nighters---unite!!!
Rawhideken10scuzziNew Member Introduct...Hi all new to this site ! hope I do...
consitter75Marc HGeneral DiscussionLate nighters---unite!!!
consitter751dn5upGeneral DiscussionLate nighters---unite!!!
Rawhideken10Marc HNew Member Introduct...Hi all new to this site ! hope I do...
Rawhideken10trike ladyNew Member Introduct...Hi all new to this site ! hope I do...
David35754Uncle FesterThe Gun EnthusiastJust Gun Memes
Mykneesbehurtin9rhino 2Harley Tri GlideTri Glide Reverse Motor
agapsdiver5RKplus10Harley Freewheeler /...Completed Project: 2024 RG3 added T...
Rawhideken10hardwickbvNew Member Introduct...Hi all new to this site ! hope I do...
Rawhideken10SullyNew Member Introduct...Hi all new to this site ! hope I do...
Rawhideken10Uncle FesterNew Member Introduct...Hi all new to this site ! hope I do...
agapsdiver5Papa ZookHarley Freewheeler /...Completed Project: 2024 RG3 added T...
agapsdiver5agapsdiverHarley Freewheeler /...Completed Project: 2024 RG3 added T...
agapsdiver5agapsdiverHarley Freewheeler /...Completed Project: 2024 RG3 added T...
agapsdiver5agapsdiverHarley Freewheeler /...Completed Project: 2024 RG3 added T...
DK Custom Products362ultrafxrHarley Tri GlideWhat did you do to Your Tri-Glide T...
Rawhideken10rhino 2New Member Introduct...Hi all new to this site ! hope I do...
DK Custom Products362ultrafxrHarley Tri GlideWhat did you do to Your Tri-Glide T...
Rawhideken5ROAD DOGHarley Tri Glide2024 Tri glide
Rawhideken5TrampasHarley Tri Glide2024 Tri glide
Rawhideken5RawhidekenHarley Tri Glide2024 Tri glide
Rawhideken5ROAD DOGHarley Tri Glide2024 Tri glide
JerseyGirlRider9Papa ZookHarley Freewheeler /...Road Glide 3 - Is this normal?
JerseyGirlRider9RKplus10Harley Freewheeler /...Road Glide 3 - Is this normal?
Rawhideken10Papa ZookNew Member Introduct...Hi all new to this site ! hope I do...
Rawhideken10RawhidekenNew Member Introduct...Hi all new to this site ! hope I do...
Rawhideken5RawhidekenHarley Tri Glide2024 Tri glide
Rawhideken10Papa ZookNew Member Introduct...Hi all new to this site ! hope I do...
GPz11002GPz1100General DiscussionHonda Valkyrie Conversions
Gfitzz536ROAD DOGGeneral Harley Chatengine oil transfer to primary side...
Rawhideken10RawhidekenNew Member Introduct...Hi all new to this site ! hope I do...
Sully1SullyGeneral DiscussionHAPPY St. PATRICKS DAY
Gfitzz536Gfitzz53General Harley Chatengine oil transfer to primary side...
GPz11009hardwickbvNew Member Introduct...I'm Back
DrCrazyTrain12hardwickbvNew Member Introduct...Introduction
Hogman196tpb857Harley Tri GlideCobra # 6256 Pro chamber headpipes
ISP-FL2NotgrownupHarley Tri GlideMaybe Not Correct Fitment
Mykneesbehurtin9ISP-FLHarley Tri GlideTri Glide Reverse Motor
ISP-FL2ISP-FLHarley Tri GlideMaybe Not Correct Fitment
Bouncer9ISP-FLHarley Tri GlideDrive Belt Replacement Time
Gfitzz536ROAD DOGGeneral Harley Chatengine oil transfer to primary side...
Gfitzz536ROAD DOGGeneral Harley Chatengine oil transfer to primary side...
Gfitzz536Gfitzz53General Harley Chatengine oil transfer to primary side...
Bouncer9NotgrownupHarley Tri GlideDrive Belt Replacement Time
ISP-FL2NotgrownupHarley Tri GlideMaybe Not Correct Fitment
consitter751dn5upGeneral DiscussionLate nighters---unite!!!
JerseyGirlRider9NotgrownupHarley Freewheeler /...Road Glide 3 - Is this normal?
Chief80138NotgrownupHarley Tri GlideHow many miles on your Triglide?
GPz11009NotgrownupNew Member Introduct...I'm Back
SHARKDIVER2NotgrownupGeneral Harley Chatsuper shox
Notgrownup3NotgrownupHarley Tri GlideClutch lever not touching the safet...
DK Custom Products362NotgrownupHarley Tri GlideWhat did you do to Your Tri-Glide T...
GPz11009hogmemberisoldNew Member Introduct...I'm Back
GPz11002Papa ZookGeneral DiscussionHonda Valkyrie Conversions
GPz11009trike ladyNew Member Introduct...I'm Back
consitter75consitterGeneral DiscussionLate nighters---unite!!!
GPz11009SullyNew Member Introduct...I'm Back
Chief80138RKplus10Harley Tri GlideHow many miles on your Triglide?
Oldrodder2Marc HHarley Trike Convers...Pingel electric shift
14TG214TGHarley Tri GlideValve stem clearance
Oldrodder4Papa ZookHarley Trike Convers...2006 CVO with M/T Gladiator with el...
GPz11009Marc HNew Member Introduct...I'm Back
14TG2Papa ZookHarley Tri GlideValve stem clearance
14TG214TGHarley Tri GlideValve stem clearance
Chief80138rhino 2Harley Tri GlideHow many miles on your Triglide?
GPz11009rhino 2New Member Introduct...I'm Back
consitter75ZammyGeneral DiscussionLate nighters---unite!!!
GPz11009ZammyNew Member Introduct...I'm Back
GPz11009GPz1100New Member Introduct...I'm Back
Gfitzz536ROAD DOGGeneral Harley Chatengine oil transfer to primary side...
GPz11002GPz1100General DiscussionHonda Valkyrie Conversions
JerseyGirlRider9JerseyGirlRiderHarley Freewheeler /...Road Glide 3 - Is this normal?
Chief80138Artpe54Harley Tri GlideHow many miles on your Triglide?
DK Custom Products362NotgrownupHarley Tri GlideWhat did you do to Your Tri-Glide T...
Notgrownup3NotgrownupHarley Tri GlideClutch lever not touching the safet...
SHARKDIVER2SHARKDIVERGeneral Harley Chatsuper shox
Rogue16Rogue1Harley Tri GlidePowder coating
Oldrodder2OldrodderHarley Trike Convers...Pingel electric shift
consitter75trike ladyGeneral DiscussionLate nighters---unite!!!
Papa Zook96Phu CatBBQ, Grilling, Cooki...Whats for supper?
Noodles1076Phu CatHarley Freewheeler /...Battery ??
Rogue16David792Harley Tri GlidePowder coating
Gfitzz536Gfitzz53General Harley Chatengine oil transfer to primary side...
Gfitzz536Gfitzz53General Harley Chatengine oil transfer to primary side...
Papa Zook96SullyBBQ, Grilling, Cooki...Whats for supper?
DK Custom Products362Jd1aHarley Tri GlideWhat did you do to Your Tri-Glide T...
Gfitzz536Dan SCGeneral Harley Chatengine oil transfer to primary side...
Gfitzz536ROAD DOGGeneral Harley Chatengine oil transfer to primary side...
ISP-FL10cycle7447General Harley ChatDealer Charging For CC usage
Burnerboy4BurnerboyRoadsmith Trikes
...
I finally got my TRIKE out of hiber...
Noodles1076Old Road DogHarley Freewheeler /...Battery ??
DrCrazyTrain12CCjonNew Member Introduct...Introduction
ISP-FL10rhino 2General Harley ChatDealer Charging For CC usage
consitter75rhino 2General DiscussionLate nighters---unite!!!
DK Custom Products362Jarhead82Harley Tri GlideWhat did you do to Your Tri-Glide T...
Papa Zook2GorillaGeneral DiscussionNew Dedicated Motor Trike, Hannigan...
Rogue1614TGHarley Tri GlidePowder coating
Noodles1076Papa ZookHarley Freewheeler /...Battery ??
Burnerboy4tourmanRoadsmith Trikes
...
I finally got my TRIKE out of hiber...
GPz11002Papa ZookGeneral DiscussionHonda Valkyrie Conversions
Noodles1076WindyOneHarley Freewheeler /...Battery ??
consitter75trike ladyGeneral DiscussionLate nighters---unite!!!
Noodles1076Noodles107Harley Freewheeler /...Battery ??
Rogue16JTJerseyHarley Tri GlidePowder coating
ISP-FL10BurnerboyGeneral Harley ChatDealer Charging For CC usage
Gfitzz536MykneesbehurtinGeneral Harley Chatengine oil transfer to primary side...
GPz11002GPz1100General DiscussionHonda Valkyrie Conversions
ISP-FL10My TurnGeneral Harley ChatDealer Charging For CC usage
ISP-FL10cycle7447General Harley ChatDealer Charging For CC usage
Gfitzz536Gfitzz53General Harley Chatengine oil transfer to primary side...
Gfitzz536ROAD DOGGeneral Harley Chatengine oil transfer to primary side...
Noodles1076ROAD DOGHarley Freewheeler /...Battery ??
ISP-FL10ROAD DOGGeneral Harley ChatDealer Charging For CC usage
ISP-FL10JTJerseyGeneral Harley ChatDealer Charging For CC usage
Papa Zook2Papa ZookGeneral DiscussionNew Dedicated Motor Trike, Hannigan...
Oldrodder4OldrodderHarley Trike Convers...2006 CVO with M/T Gladiator with el...
JerseyGirlRider9JerseyGirlRiderHarley Freewheeler /...Road Glide 3 - Is this normal?
ISP-FL10KrazeehorseGeneral Harley ChatDealer Charging For CC usage
Papa Zook2Papa ZookGeneral DiscussionNew Dedicated Motor Trike, Hannigan...
Noodles1076Noodles107Harley Freewheeler /...Battery ??
Noodles1076Papa ZookHarley Freewheeler /...Battery ??
Noodles1076Noodles107Harley Freewheeler /...Battery ??
JerseyGirlRider9Papa ZookHarley Freewheeler /...Road Glide 3 - Is this normal?
Rogue16Rogue1Harley Tri GlidePowder coating
Rogue16PanheadSteveHarley Tri GlidePowder coating
ISP-FL10rhino 2General Harley ChatDealer Charging For CC usage
Gfitzz536rhino 2General Harley Chatengine oil transfer to primary side...
JerseyGirlRider9Phu CatHarley Freewheeler /...Road Glide 3 - Is this normal?
Baldy_543MickHonda TrikesOkay on Cinco De Mayo
Likes Likes:  0
Thanks Thanks:  0
Results 1 to 14 of 14

Thread: Backrest for my 2007 FLH Champion IRS kit

  1. #1
    60+ Posts
    Join Date
    Apr 2013
    Location
    Bedford, TX
    Posts
    68
    Thanks
    0
    Thanked 0 Times in 0 Posts

    Default Backrest for my 2007 FLH Champion IRS kit

    I just rode my 2007 FLH Champion IRS conversion with its stock saddle to Bikeweek in Daytona (from Dallas) and for the first time I didn't have a duffle bag full of clothes behind me on the passenger seat. The lower muscles in my back got real sore. I went to the Mustang Saddle people at Destination Daytona to purchase a backrest. They removed the seat and concluded that the stock Harley backrest bracket would not fit on my trike. Does anyone know if I can put a backrest on my 2007 Champion conversion?

  2. #2
    2000+ Posts
    Gold Club Member
    tfdeputydawg's Avatar
    Join Date
    Jun 2010
    Location
    Indianapolis, In.
    Posts
    2,187
    Thanks
    0
    Thanked 2 Times in 1 Post

    Default Re: Backrest for my 2007 FLH Champion IRS kit

    IMHO, there is no modifications made to the bike in the frame, under the seat, when a trike conversion is added. I have no idea why they would tell you that unless they were trying to sell a new seat with their back rest.
    I'd go to an HD dealer and I bet you get your backrest!
    Christian Motorcyclist Association #64488
    Patriot Guard
    Volunteer Fire/Rescue/EMT/Captain
    Was a LEO
    Part time Corrections Officer

  3. #3
    10+ Posts
    Join Date
    Dec 2010
    Location
    Ft lauderdale, FL
    Posts
    18
    Thanks
    0
    Thanked 0 Times in 0 Posts

    Default Back rest

    Quote Originally Posted by Dennis Murawski View Post
    I just rode my 2007 FLH Champion IRS conversion with its stock saddle to Bikeweek in Daytona (from Dallas) and for the first time I didn't have a duffle bag full of clothes behind me on the passenger seat. The lower muscles in my back got real sore. I went to the Mustang Saddle people at Destination Daytona to purchase a backrest. They removed the seat and concluded that the stock Harley backrest bracket would not fit on my trike. Does anyone know if I can put a backrest on my 2007 Champion conversion?
    I have a 2010 FLH with a DFT conversion. I went to the Mustang booth at the race track. They had a bracket that bolted to my frame under the seat. I was able to use their 2 up seat and their adj back rest. My ride and back felt fine. My ride was only back to S. Florida.

  4. #4
    300+ Posts roadking2's Avatar
    Join Date
    Oct 2013
    Location
    North Lawrence, Ohio
    Posts
    324
    Thanks
    0
    Thanked 9 Times in 9 Posts

    Default

    My Champion IRS conversion came with brackets for a backrest so maybe the best place to check would be with Champion.

  5. #5
    60+ Posts
    Join Date
    Apr 2013
    Location
    Bedford, TX
    Posts
    68
    Thanks
    0
    Thanked 0 Times in 0 Posts

    Default

    Quote Originally Posted by roadking2 View Post
    My Champion IRS conversion came with brackets for a backrest so maybe the best place to check would be with Champion.
    I talked to Bill at Champion and he said those brackets were shipped with the kit to the guy that did my conversion. The problem was, I didn't have a backrest on the bike when I brought it in, so the installer didn't install the brackets. Trike Conversions of Texas shut down their web site and disconnected their phone. Champion is willing to sell me a replacement set at $220 plus shipping (ouch!).

    If anyone has a set of these brackets that's not on the trike, could you give me a set of the measurements that would allow me to attempt to make my own brackets?

    I love my Champion IRS kit, but Champion really needs to develop a better dealer network. The Dallas / Ft. Worth area doesn't have a single Champion trike installer. The fly-by-night shop that was closest to me (still a couple hundred miles from my house) was run out of a rental storage unit. It a shame that this quality product doesn't have a quality dealer network.

  6. #6
    Senior Moderator
    Gold Club Member
    Gorilla's Avatar
    Join Date
    Oct 2008
    Location
    Key Largo. Fl,. USA
    Posts
    15,146
    Thanks
    0
    Thanked 2 Times in 2 Posts

    Default

    Quote Originally Posted by Dennis Murawski View Post
    I talked to Bill at Champion and he said those brackets were shipped with the kit to the guy that did my conversion. The problem was, I didn't have a backrest on the bike when I brought it in, so the installer didn't install the brackets. Trike Conversions of Texas shut down their web site and disconnected their phone. Champion is willing to sell me a replacement set at $220 plus shipping (ouch!).

    If anyone has a set of these brackets that's not on the trike, could you give me a set of the measurements that would allow me to attempt to make my own brackets?

    I love my Champion IRS kit, but Champion really needs to develop a better dealer network. The Dallas / Ft. Worth area doesn't have a single Champion trike installer. The fly-by-night shop that was closest to me (still a couple hundred miles from my house) was run out of a rental storage unit. It a shame that this quality product doesn't have a quality dealer network.
    One thing to remember about Champion conversion is that they are one of the most used by self installers. This could be way they don't have the dealer/installer network of say a company like Hanagan that does not usually sell to self installers. Just a thought.

    Also may I suggest contact "Papa Zook" he maybe able to help you with the bracket or at least advise you.
    Stallion #406 // 2013 Tri-Glide

  7. #7
    200+ Posts whitefatboy's Avatar
    Join Date
    Feb 2011
    Location
    davison,MI.,USA
    Posts
    225
    Thanks
    0
    Thanked 0 Times in 0 Posts

    Default backrest

    I have the Mustang 2up with backrest on my o2 fatboy with DFT, it works very well, not sure what you are having the problem with, was Mustang no help ?

  8. #8
    60+ Posts
    Join Date
    Apr 2013
    Location
    Bedford, TX
    Posts
    68
    Thanks
    0
    Thanked 0 Times in 0 Posts

    Default

    Quote Originally Posted by whitefatboy View Post
    I have the Mustang 2up with backrest on my o2 fatboy with DFT, it works very well, not sure what you are having the problem with, was Mustang no help ?
    In order to attach the backrest bracket to the frame of a Champion kit, you need the special bolt on brackets that attach to the frame. The backrest bracket that both Mustang and Harley use will not fit without them. The folks at Mustang worked very hard to do an install without these brackets and concluded they couldn't do it. The sad thing is I paid for them when I bought the kit and the installer left them sitting on the shelf because I didn't have a backrest on the bike when I brought it in for the conversion. Oh, and after 16,000+ miles, I'm glad I choose the Champion IRS kit.

  9. #9
    300+ Posts roadking2's Avatar
    Join Date
    Oct 2013
    Location
    North Lawrence, Ohio
    Posts
    324
    Thanks
    0
    Thanked 9 Times in 9 Posts

    Default

    Quote Originally Posted by whitefatboy View Post
    I have the Mustang 2up with backrest on my o2 fatboy with DFT, it works very well, not sure what you are having the problem with, was Mustang no help ?
    It's the Champion sissy bar brackets that he does not have and needs.

    - - - Updated - - -

    Quote Originally Posted by Dennis Murawski View Post
    I talked to Bill at Champion and he said those brackets were shipped with the kit to the guy that did my conversion. The problem was, I didn't have a backrest on the bike when I brought it in, so the installer didn't install the brackets. Trike Conversions of Texas shut down their web site and disconnected their phone. Champion is willing to sell me a replacement set at $220 plus shipping (ouch!).

    If anyone has a set of these brackets that's not on the trike, could you give me a set of the measurements that would allow me to attempt to make my own brackets?

    I love my Champion IRS kit, but Champion really needs to develop a better dealer network. The Dallas / Ft. Worth area doesn't have a single Champion trike installer. The fly-by-night shop that was closest to me (still a couple hundred miles from my house) was run out of a rental storage unit. It a shame that this quality product doesn't have a quality dealer network.
    Mine is a lot older than yours is. My conversion is on a 2000 Roadking, but talk to Champion and if the brackets are the same regardless of year, I can send you a template of mine if it will help.

  10. #10
    60+ Posts
    Join Date
    Apr 2013
    Location
    Bedford, TX
    Posts
    68
    Thanks
    0
    Thanked 0 Times in 0 Posts

    Default

    Quote Originally Posted by Gorilla View Post
    One thing to remember about Champion conversion is that they are one of the most used by self installers. This could be way they don't have the dealer/installer network of say a company like Hanagan that does not usually sell to self installers. Just a thought.

    Also may I suggest contact "Papa Zook" he maybe able to help you with the bracket or at least advise you.
    I'm going to file that information in the folder titled "Now they tell me.." I triked my FLHT after I lost my left leg and left hand. Somehow, single handedly (yes, that's a pun) attempting the conversion wasn't in my cards. After researching design options, I went with Champion and choose their nearest authorized installer. If I were to do it today, I'd still choose Champion but I'd have the install done by a competent local shop. Besides being on Champion's list of dealers, the guy had a great looking web site. I signed the contract without ever seeing his operation because he was over 200 miles from my house.

    Web pages be like, "Ignore the man behind the curtain." Trusting - yes, naive - maybe, stupid - I plead the Fifth.

    - - - Updated - - -

    Quote Originally Posted by roadking2 View Post
    It's the Champion sissy bar brackets that he does not have and needs.

    - - - Updated - - -



    Mine is a lot older than yours is. My conversion is on a 2000 Roadking, but talk to Champion and if the brackets are the same regardless of year, I can send you a template of mine if it will help.
    Thank you for your kind offer.

    I'll call Bill at Champion on Monday and if the brackets are the same, I'll take you up on your offer.

  11. #11
    300+ Posts roadking2's Avatar
    Join Date
    Oct 2013
    Location
    North Lawrence, Ohio
    Posts
    324
    Thanks
    0
    Thanked 9 Times in 9 Posts

    Default

    This a copy of mine if it helps.

    Sissy bar bracket.pdf

    The channel that holds the bar is at a 80 degree angle. If you print it out full size, I traced around the bracket so it should be pretty accurate.

  12. #12
    300+ Posts roadking2's Avatar
    Join Date
    Oct 2013
    Location
    North Lawrence, Ohio
    Posts
    324
    Thanks
    0
    Thanked 9 Times in 9 Posts

    Default

    Quote Originally Posted by roadking2 View Post
    This a copy of mine if it helps.

    Sissy bar bracket.pdf

    The channel that holds the bar is at a 80 degree angle. If you print it out full size, I traced around the bracket so it should be pretty accurate.
    I just noticed some of the diagram got truncated when I rotated it. The holes are 3/8" and the height is 6 3/8". The height of the front portion is 1 1/4".

  13. #13
    60+ Posts
    Join Date
    Apr 2013
    Location
    Bedford, TX
    Posts
    68
    Thanks
    0
    Thanked 0 Times in 0 Posts

    Default

    Quote Originally Posted by roadking2 View Post
    This a copy of mine if it helps.

    Sissy bar bracket.pdf

    The channel that holds the bar is at a 80 degree angle. If you print it out full size, I traced around the bracket so it should be pretty accurate.
    Thank you so much. I called Bill at Champion and he said your bracket is the very same one that would fit my 2007. I printed the pdf, but I think it chopped off the data on the right hand side. Thanks again for your help.

    - - - Updated - - -

    Quote Originally Posted by roadking2 View Post
    I just noticed some of the diagram got truncated when I rotated it. The holes are 3/8" and the height is 6 3/8". The height of the front portion is 1 1/4".
    I noticed your follow up after I replied to your earlier post. Thanks again.

  14. #14
    300+ Posts roadking2's Avatar
    Join Date
    Oct 2013
    Location
    North Lawrence, Ohio
    Posts
    324
    Thanks
    0
    Thanked 9 Times in 9 Posts

    Default

    Quote Originally Posted by Dennis Murawski View Post
    Thank you so much. I called Bill at Champion and he said your bracket is the very same one that would fit my 2007. I printed the pdf, but I think it chopped off the data on the right hand side. Thanks again for your help.

    - - - Updated - - -



    I noticed your follow up after I replied to your earlier post. Thanks again.
    You are more than welcome. It was no big deal to trace around it. I hope you are able to make workable brackets from the diagram I attached. Hopefully at a minimum you will get brackets to work that are cheaper than what Champion was asking for them. I'd offer up mine, but I plan on using them in the future. I will say that the Champion brackets are very nice with a really good chrome finish.

Similar Threads

  1. Transmission Pulley change on a 2007 FLHT with a Champion IRS Trike Kit.
    By Dennis Murawski in forum Harley Trike Conversions
    Replies: 1
    Last Post: 09-29-2014, 11:00 PM
  2. 2007 GL1800 Champion weight
    By GrandpaDave in forum Honda Trikes
    Replies: 3
    Last Post: 04-22-2014, 10:14 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •