I'm not familiar with that product Mike. Here is what I did to my '06 MotorTrike. I considered doing the same thing with the 2015 Roadsmith but thought the paint needed to speak for itself so I just did the rear bumper to give it a little protection.
Jerry "Gold Rush" (aka: "SPOOK") San Angelo, TX
2015 GL1800/Roadsmith HTS1800
TOI - IBA #23804 (SS1K & BB1.5K)
I'm like an old race horse..... I can still run the race -- Just ache more at the finish line and need more rest between outings.
I used a chrome strip with double stick tape. Picked it up at CARQUEST auto store. Wrapped it around the tire well and cross the lower rear end.
I have the door edge guard around the gas tank on my VTX. My buddy has it around the fenders as you are thinking.
Ridin' three and free. Ain't never goin' back
2003 1800 Gold Wing Trike w/Roadsmith kit. Northeast Region Trike Riders on F B.
My HT1800 kit came standard with the chrome edging. However, I think yours looks better without it.
Wing with Roadsmith kit, Traxxion Ak20 cartridges and Accuride System.
07 ST 1300 for two-wheeled fun!
I like a nice clean pinstripe for accents.
But you can buy the edging in different widths at most big auto stores or on Ebay..... door edge is usually a little to short to go to where you want it, with it in a roll you can do the whole trike edge if wanted.... I use clear door edge across the top of my F4+4 windshield to direct the water to the sides...works well and clear you don't notice it.... FYI
"There comes a time in your life, when you walk away from all the drama and people who create it. You surround yourself with people who make you laugh. Forget the bad, and focus on the good. Love the people who treat you right, pray for the ones who don't. Life is too short to be anything but happy. Falling down is a part of life, getting back up is living."
Yep, that's what I used. Door edge guard from auto store, alot cheaper than OME
2013 Tri-Glide with a few extras
Vietnam Vet 66 / 67
CQ CQ DE KD4LZL
Member Patriot Guard Riders
If you lend someone $20 and never see that person again, it was probably worth it.
You buy it in a roll, not the short door pieces.... or it will look crappy..... and buy the better grade with 3m Bonding, the other cheeep crap the glue will depart out in the sun and the stripping will blow off....how do I know!!! Right.....
"There comes a time in your life, when you walk away from all the drama and people who create it. You surround yourself with people who make you laugh. Forget the bad, and focus on the good. Love the people who treat you right, pray for the ones who don't. Life is too short to be anything but happy. Falling down is a part of life, getting back up is living."
I don't think chrome will look at its best. Perhaps blue if available would look good on the silver fenders. Mine is red and silver, been thinking about looking for some red.
http://i25.photobucket.com/albums/c5...an_cross_f.jpg
20015 freewheeler
2005 113 pro twin super glide
2010 ss106 wide glide
2004 1800 VTX custom
2012 GW RS
I don't know about any color, but white screams for chrome ... so does black ... and blue ... and red ... hmmmm .. beginning to see a pattern
Solidbob -- can you provide a link to the edge guard you used on your windscreen & maybe a pic of it installed to show how far down the sides you ran it? Thanks, Stan
"There comes a time in your life, when you walk away from all the drama and people who create it. You surround yourself with people who make you laugh. Forget the bad, and focus on the good. Love the people who treat you right, pray for the ones who don't. Life is too short to be anything but happy. Falling down is a part of life, getting back up is living."
http://i25.photobucket.com/albums/c5...an_cross_f.jpg
20015 freewheeler
2005 113 pro twin super glide
2010 ss106 wide glide
2004 1800 VTX custom
2012 GW RS
Solidbob - thanks for the pic. I have searched & cannot find it with the 3M tape/adhesive, only the cheap stuff. Any chance you remember where you purchased? Stan