Speed Bleeders on a Hannigan

[gr8phun]

Called Hannigan and they said need M10X1.25 on the rear calipers(1984-1987 Honda Civic)

What size(s) do I need on the front calipers and clutch

Asked on another board all I got were blank stares

[mhgoldwing]

Go to http://www.speedbleeder.com/ and they have a chart that lists the sizes you need for brakes and clutch.

[dirtdobber]

http://www.hondadirectline.com/oempa...CA5MCAAF1200AC

You will need #5 and 6, get 2 of each. One set for each side.

You can also find it in the service manual.

[Gold Rush]

http://www.hondadirectline.com/oempa...CA5MCAAF1200AC

You will need #5 and 6, get 2 of each. One set for each side.

You can also find it in the service manual.

Mornin' DD. The OP is looking for Speed Bleeders not the OEM bleeder valves ....... Hey, at least you tried to help - RIGHT ???

Ride Safe my Friend

[Lawingnutz]

Go to http://www.speedbleeder.com/ and they have a chart that lists the sizes you need for brakes and clutch.

Speedbleeder chart only goes to '09....is Gen II ('12-'15) the same as '09????

- - - Updated - - -

For front, rear and clutch. How many bleeders of each size??

[dirtdobber]

Must have been thinking of bed. LOL

[Gold Rush]

Called Hannigan and they said need M10X1.25 on the rear calipers(1984-1987 Honda Civic)

What size(s) do I need on the front calipers and clutch

Asked on another board all I got were blank stares

Just a tiny bit of research is all it took using the links dirtdobber and mygoldwing gave you to figure out the OEM bleed valves are the same for all GL1800s and the speedbleeder nunbers. I don't know if Hannigan delinks the breaks so I can't tell you how many of which size you need. Shouldn't take you long now to sort that much out.

Have Fun...

[Lawingnutz]

I ordered the following Speed Bleeders to equip my Hannigan with Speed Bleeders for brakes and clutch:
2 - SB10125 for rear brakes
6 - SB8125L for front brakes and clutch