Khrome Werks 2+2 narrow sweepers (pics)

[WindyOne]

Picked the trike up at the dealers today after they installed The Khrome Werks 2+2 Narrow sweeper bars. First impressions is it is money well spent. I can lean fully back on the riders backrest now. My hands are much higher than with stock bars and I still have some slack in my arms. Turning does not take as much body animation and the act of steering seems easier. I would do this again in a heart beat.

[FuzzyWuzHe]

Picked the trike up at the dealers today after they installed The Khrome Werks 2+2 Narrow sweeper bars. First impressions is it is money well spent. I can lean fully back on the riders backrest now. My hands are much higher than with stock bars and I still have some slack in my arms. Turning does not take as much body animation and the act of steering seems easier. I would do this again in a heart beat.

Did they have to do new cables and hoses? Mind if I ask about the cost?

[arnie]

I put these bars on my 14 & all I needed was the wire extension. The clutch & brake hose fit.

[screwball]

WOW .. Boy, do those bars look great! Good choice

[tbear]

Picked the trike up at the dealers today after they installed The Khrome Werks 2+2 Narrow sweeper bars. First impressions is it is money well spent. I can lean fully back on the riders backrest now. My hands are much higher than with stock bars and I still have some slack in my arms. Turning does not take as much body animation and the act of steering seems easier. I would do this again in a heart beat.

Are you as short as me? I'm 5'6" tall with short arms. Been thinking of your type Handle Bars for awhile now. would I be in the ball park with the 2+2's?

[WindyOne]

Fuzzy No hoses on my model year 2013. I got new cables because I wanted them. Cost with new grips $1067.


TBear I am a bit taller at 5'11". I like having my hands higher and closer to me than stock. Just a way more comfortable ride. Height is subjective. One person can have a longer torso but shorter legs and another can have longer legs and a shorter torso.

What I did was lean back on the backrest, hold my arms where I wanted them to be and had the wife measure the difference on the stock bars.

[FuzzyWuzHe]

What I did was lean back on the backrest, hold my arms where I wanted them to be and had the wife measure the difference on the stock bars.

Good idea ... I'm gonna do that

[Skeet7373]

If anyone is interested here are some pics of the reduced reach handlebars in black versus the KW 2+2 Narrow Sweepers

[tbear]

Fuzzy No hoses on my model year 2013. I got new cables because I wanted them. Cost with new grips $1067.


TBear I am a bit taller at 5'11". I like having my hands higher and closer to me than stock. Just a way more comfortable ride. Height is subjective. One person can have a longer torso but shorter legs and another can have longer legs and a shorter torso.

What I did was lean back on the backrest, hold my arms where I wanted them to be and had the wife measure the difference on the stock bars.

thanks for the reply. I will have the wiffee do that for me also.

[RickDeVon]

Thanks for the pictures...what is the part# for the narrow KW bars...

[WindyOne]

Thanks for the pictures...what is the part# for the narrow KW bars...

300519 on Khrome works site. Drag Specialties # 0601-2858

[FuzzyWuzHe]

I'm thinking this is gonna be my next winter project ... definitely bars .. probably these or the mini apes from hd.

[toy1ton]

If anyone is interested here are some pics of the reduced reach handlebars in black versus the KW 2+2 Narrow Sweepers

reduce reach are they the same as stock?

[Red Ryder]

Nice, on the 08 Ultra I installed the same ones, when removing and painting inner fairing.

Then widen wire opening, disconnected ends, and ran wires thru bars, Very Tight Fit, lots of work, but well worth it.

Have fun, Later-

[ShapeShifter]

Those look great!! I also installed those same bars three weeks ago. However, I wimped out and didn't do the internal wiring. I definitely like the ease of steering and more comfortable hand/arm positions.

[Potlicker]

Just ordered mine through amazon part# 300519 chrome or nickel plated very excited to get them on the bike (2016 tri-glide)

[OLBLU]

Hey Shapeshifter;

Where did you get your clutch and brake lever fringe covers?

i've been looking for my 17 TriGlide but I can't find anything listed past 2013 models.

Thank you.

[ShapeShifter]

Hey Shapeshifter;

Where did you get your clutch and brake lever fringe covers?

i've been looking for my 17 TriGlide but I can't find anything listed past 2013 models.

Thank you.

Had a hard time finding some with thick leather fringe. I found mine on Amazon from a Seller named Mark's Custom Designs. They are 16" and I had to cut about 1 1/2" off to stop the ends from tangling at hi-way speeds.

[Potlicker]

Ordered the bars yesterday, and the arrive 24 hrs later. I live in Wisconsin and they came from Seattle, can’t not believe how fast the service was, installing them tomorrow night,

[OLBLU]

Thanks for the info, Shapeshifter