did you align the drive shaft?
Hay guys and girls thanks for all the info on the cv joint ,that was the problem and i replaced it and lined it up like some one said.The clunk is gone but now i have a vibration,any thoughts thanks rich. P S this is on a 88 1500 goldwing
did you align the drive shaft?
Stallion #406 // 2013 Tri-Glide
Hay tmigala what exactly does that mean
The drive shaft out of the trans of a Honda has an alignment. If it is not aligned it will vibrate. I do not know the alignment procedure though sorry.
Stallion #406 // 2013 Tri-Glide
Thanks for all the info ,I think I have figured it out but if some one knows what the alignment procedure is I would like to know just to double check and make shore this is right. Thanks Rich.
the 2 yokes on the shaft should be timed
if you set the shaft on a flat surface the inner two yokes should sit flat and or the outside two should sit flat
hope you can understand that
Don - 2004 GL1800 Champion trike, 2018 Can Am Spyder RT Limited
2 wheeler: 2013 Triumph Bonneville T100
FORR Local 11, AMA, MRF, Mid-South MILE Committee
Thanks every one for the help,it's as smooth as a baby's behind now.Hope I can be of help to some one some day, RICH
Great news Rich!!!!! We do have a lot of very knowledgeable folks here! I'm glad someone knew exactly what you needed
Trike Talk Membership Map
No matter the storm, when you are with God, there is always a rainbow waiting.
http://i440.photobucket.com/albums/q...andana-1-1.jpg
Congrats another satisfied member
Stallion #406 // 2013 Tri-Glide