I need some help, I'm trying to remove the battery cover from my 2013 trike but can't figure out how to get the cover completely off,so I can remove the battery. Thanks for any help.
I need some help, I'm trying to remove the battery cover from my 2013 trike but can't figure out how to get the cover completely off,so I can remove the battery. Thanks for any help.
I had my 11 T/G out a short time ago, There's a few snap connections [wires] that have to be unsnapped and the wires then can be pushed to the side and you can lift the [heavy] battery out... I wish I could be more technical. But that's how I did it..
Sometimes a Cigar is Just a Cigar.....
2019 Tri-Glide.......
The cover over the battery has two screws facing the rear, and appears to be hinged facing forward which doesn't lift high enough to remove the battery, this is the problem I'm facing ?
the 2 bolts in the rear are obvious. What most people have a problem with is the front. It is just a square opening in the cover that fits over the metal bracket. It's kind of difficult to get off but it does come off. you have to remove the security antenna attached to the top. good luck
Stallion #406 // 2013 Tri-Glide
remove the screws.the module antenna, push plastic cover towards front of trike. there is a metal tab about a inch down you have to get around.
Thanks for your help, I could not get the cover off but was able to charge the battery.
I've had trouble getting the cover off ALL the Electra Glides I ever owned.
I know this is a little late, But if all you what do is just charge the battery, Put a pig tail connection on Then you won't have to go though that grief again..
Sometimes a Cigar is Just a Cigar.....
2019 Tri-Glide.......