Lehman Trike Parts & Info Thread

['01Trike]

Hello

A very good friend of mine passed away and it's looking like I may have a chance to get his 2001 Goldwing with a Lehman Monarch kit. Possibly a Monarch II kit. How do I tell the difference? It does have the parking brake.

There is some sort of noise in either the transmission or rear end. It hasn't been run in the last two years or so, and now I see he had been searching for some type of problem rear of the fuse block. It evidently didn't run, possibly those relays or solenoids back there. It will not turn over. The F1 light goes on but does go off. IF it turns out that I do get it I may have lots of questions for you.

Thank you,

[rhino 2]

Hello

A very good friend of mine passed away and it's looking like I may have a chance to get his 2001 Goldwing with a Lehman Monarch kit. Possibly a Monarch II kit. How do I tell the difference? It does have the parking brake.

There is some sort of noise in either the transmission or rear end. It hasn't been run in the last two years or so, and now I see he had been searching for some type of problem rear of the fuse block. It evidently didn't run, possibly those relays or solenoids back there. It will not turn over. The F1 light goes on but does go off. IF it turns out that I do get it I may have lots of questions for you.

Thank you,

Clay............Welcome to Trike-Talk..........

[woodysjrny]

Looking for information as the the right trailer hitch for a 2012 Victory Vision Crossbow conversion. I'm almost sure the hitch for the vision will work, then again, I've been wrong before.

Any help would be appreciated.

Woody

[stacebg]

Looking for information as the the right trailer hitch for a 2012 Victory Vision Crossbow conversion. I'm almost sure the hitch for the vision will work, then again, I've been wrong before.

Any help would be appreciated.

Woody

i would suggest u start a new thread !

[David Jent]

would you have any goldwing side panels?

[David Jent]

I have decided to chime in with an announcement. Many Lehman owners are having difficulty contacting the factory to get parts and or part numbers, answer to maintenance questions and general information on their Lehman Trike. Since the company is now under new ownership and many of the old employees have left, there is a lot of information that left as well. Many of the models prior to 2002 are unknown to the existing Lehman company representatives and therefor the understanding of particular parts for these models is also missing.

I have been a Lehman Dealer since 1998 and have serviced and re-built models that date back to the mid-1980's. I also have a number of wear related new parts for these older dis-continued models as well as part numbers for the ones I don't stock.

Post a question or comment and I will do my best to solve your issues.

Thanks

Im looking for some side panels for an 07 wing. Onthebordertrikeshop@gmail.com

[Gorilla]

David the owner of that business died several months ago. A friend comes on occasionally to see if there is anything needed that they still have. It does not appear to be very often.

[Cheb]

David the owner of that business died several months ago. A friend comes on occasionally to see if there is anything needed that they still have. It does not appear to be very often.

[HERMBONE]

Just bought a 2001 Road King FLHPI with a Lehman Renegade kit on it. New to the Trike world....Are parts hard to find for them? Probably going to need to freshen up the brakes. Not sure what year the conversion was done. The bike has been sitting for the last 4 years so the differential may need some attention as well. Appreciate any information on where to get parts. Thanks

[rhino 2]

Just bought a 2001 Road King FLHPI with a Lehman Renegade kit on it. New to the Trike world....Are parts hard to find for them? Probably going to need to freshen up the brakes. Not sure what year the conversion was done. The bike has been sitting for the last 4 years so the differential may need some attention as well. Appreciate any information on where to get parts. Thanks

Herman.........Welcome to Trike-Talk..............

[rhino 2]

Kevin ........Welcome To Trike-Talk...........

[Gorilla]

kevin welcome jim was our lehman expert. we miss his input very much. your taking up the cause is greatly appreciated by the community. please be our expert. i suggest first you need to contact randy the site owner to reach an areement if you have not already done so. his contact info is in the cut n shoot ad.

[Toni]

Ich habe beschlossen, mich mit einer Ankündigung zu melden. Viele Lehman-Besitzer haben Schwierigkeiten, das Werk zu kontaktieren, um Teile und/oder Teilenummern, Antworten auf Wartungsfragen und allgemeine Informationen zu ihrem Lehman-Trike zu erhalten. Da das Unternehmen nun in neuem Besitz ist und viele der alten Mitarbeiter gegangen sind, gibt es auch viele Informationen, die übrig geblieben sind. Viele der Modelle vor 2002 sind den bestehenden Lehman-Vertretern nicht bekannt und daher fehlt auch das Verständnis für einzelne Teile dieser Modelle.

Ich bin seit 1998 Lehman-Händler und habe Modelle aus der Mitte der 80er Jahre gewartet und umgebaut. Ich habe auch eine Reihe von verschleißbedingten Neuteilen für diese älteren Auslaufmodelle sowie Teilenummern für diejenigen, die ich nicht auf Lager habe.

Stellen Sie eine Frage oder einen Kommentar und ich werde mein Bestes tun, um Ihre Probleme zu lösen.

Danke

Hallo Jim

Ich habe ein Lehman Trike Rouge Baujahr 2001 HD Heritage und brauche neue Stoßdämpfer

es sind Progresive Suspensin 1203-BG P00285B180011 13,5 Zoll

Wo bekomme ich diese Stoßdämpfer ? Im Internet gibt es diese Stoßdämpfer nicht mehr.

Gruß Toni

[rhino 2]

Hallo Jim

Ich habe ein Lehman Trike Rouge Baujahr 2001 HD Heritage und brauche neue Stoßdämpfer

es sind Progresive Suspensin 1203-BG P00285B180011 13,5 Zoll

Wo bekomme ich diese Stoßdämpfer ? Im Internet gibt es diese Stoßdämpfer nicht mehr.

Gruß Toni

Anton.......Welcome to Trike Talk........

Jim is no longer with us .....He passed a short while ago......Maybe if you could translate your question into English someone else can help you out...

Again...Welcome To Trike-Talk........

[rgaver]

I have decided to chime in with an announcement. Many Lehman owners are having difficulty contacting the factory to get parts and or part numbers, answer to maintenance questions and general information on their Lehman Trike. Since the company is now under new ownership and many of the old employees have left, there is a lot of information that left as well. Many of the models prior to 2002 are unknown to the existing Lehman company representatives and therefor the understanding of particular parts for these models is also missing.

I have been a Lehman Dealer since 1998 and have serviced and re-built models that date back to the mid-1980's. I also have a number of wear related new parts for these older dis-continued models as well as part numbers for the ones I don't stock.

Post a question or comment and I will do my best to solve your issues.

Thanks

Just bought a 2005 sportster lehman conversion. Not sure how to get he hubcaps off and since parts are hard to get I thought is better to ask that break things up.

[rhino 2]

Just bought a 2005 sportster lehman conversion. Not sure how to get he hubcaps off and since parts are hard to get I thought is better to ask that break things up.

Rich......Welcome to Trike-Talk.........

I'm sorry to add that Jim AKA Lee H Man is no longer with us ...Hopefully someone will chime in with an answer to your question..

[Gorilla]

welcome

[Fixin2]

I have a 2005 that the rims were changed. It too had Hub caps. They also have a plastic hub cover wrench to use to turn them off. By what I see you could use a smooth or soft jaw pliers or wrap them with tape to keep from marking the chrome.

[Trikeconvert]

I have decided to chime in with an announcement. Many Lehman owners are having difficulty contacting the factory to get parts and or part numbers, answer to maintenance questions and general information on their Lehman Trike. Since the company is now under new ownership and many of the old employees have left, there is a lot of information that left as well. Many of the models prior to 2002 are unknown to the existing Lehman company representatives and therefor the understanding of particular parts for these models is also missing.

I have been a Lehman Dealer since 1998 and have serviced and re-built models that date back to the mid-1980's.





I also have a number of wear related new parts for these older dis-continued models as well as part numbers for the ones I don't

stock.







Post a question or comment and I will do my best to solve your issues.









Thanks

Thank you for your help, I converted my 2014 Ultra Limited in late 2018 at the Garden Grove facility.

















I'm looking for a Trunk Guard aka rear bumper for my Champion trike conversion. I like the one Harley offers for their factory Tri Glide. Do you have any suggestions? I was told at time of conversion that in California they no longer offered a bumper because they require airbags if you label it as such. Basically, a liability issue there I believe. I do have the factory trailer hitch installed. Please Help

[Jburro1946]

[QUOTE=Lee H. Mann;293129]I have decided to chime in with an announcement. Many Lehman owners are having difficulty contacting the factory to get parts and or part numbers, answer to maintenance questions and general information on their Lehman Trike. Since the company is now under new ownership and many of the old employees have left, there is a lot of information that left as well. Many of the models prior to 2002 are unknown to the existing Lehman company representatives and therefor the understanding of particular parts for these models is also missing.

I have been a Lehman Dealer since 1998 and have serviced and re-built models that date back to the mid-1980's. I also have a number of wear related new parts for these older dis-continued models as well as part numbers for the ones I don't stock.



Post a question or comment and I will do my best to solve your issues.

Lee,

I am looking for the right side mid frame cover for my 1997 Road King with a Rogue kit conversion. Do you happen to have one or know where I can find one? New or used will be fine. Thank you.