Wheels on CSC 2012

[Skeet7373]

Do any of you know if the offset of 42mm will work on the CSC 2012 kit Viper when the kit wheels are 35mm?

[Papa Zook]

Karen I cant say they wont fit, but I would be hesitant to buy any that much different without trying them on the trike. Just not sure what the clearance on the CSCs is. Maybe some CSC owners will chime in or a call to the factory might get you an answer.

[clint44]

Do any of you know if the offset of +42mm will work on the CSC 2012 kit Viper when the kit wheels are 35mm?

On a 7" wide wheel,a +35mm offset would equate to a 5.40" backspacing. A +42mm offset would equate to around 5.70" backspacing. My guess is the +42 offset wheels would fit fine. Just look to make sure you have at least 1/2" clearance on the inside between the tire sidewall & inner fenderwell.

When it comes to backspace,it's always better to err on the side of too much,rather than too little. Too little and you will probably get to buy new wheels. A little too much backspace can be corrected with an 1/8" or 1/4" disc brake spacer.(easily found and safe to use)

[Rick Kay]

Karen I cant say they wont fit, but I would be hesitant to buy any that much different without trying them on the trike. Just not sure what the clearance on the CSCs is. Maybe some CSC owners will chime in or a call to the factory might get you an answer.

I did some shopping to find something other than the factory offerings, and came up with nothing. I can tell you the wheels on my Daytona are the same bolt pattern as a Dodge Stratus. I'll be interested in what you find, Karen!

[Solidbob]

With a slightly wider wheel not sure of the difficulty in taking the wheel & tire off.... even though its offset it still moves the wheel location???

[07BlueCSC]

CSC uses the same bolt pattern (5 X 100mm or 5 X 3.94inches) as Audi TT, Volkswagen Beetle(NEW), Subaru, Chevy Corsica & Barretta, PT Cruiser , Town & Country Van and many others. You can go to Tire Rack, use one of the above vehicles and see what wheels you like. All wheels are listed with the offset.

[Skeet7373]

I emailed CSC and was told the 42mm offset would hit the suspension, so back to the drawing board.

[clint44]

I emailed CSC and was told the 42mm offset would hit the suspension, so back to the drawing board.

You can install a disc brake spacer between the wheel and hub,to correct the backspacing. It's done all the time. I had to use a pair of 3/8" thick spacers on the rear of my Boss Hoss trike. Sometimes,the wheel you really want isn't available in the correct offset.
http://www.summitracing.com/search/p...tern/5-x-100mm

What wheel are interested in?

[ROAD DOG]

I emailed CSC and was told the 42mm offset would hit the suspension, so back to the drawing board.

I have 08 GL1800 with a csc cobra kit It had 15x6.5 35 offset I put 15x7 40 offset ,I had to put a 3/8 spacer & grind the square corner off the rear suspension knuckle & then I HAD to use stick on wheel weights to clear the knuckle , one off my original wheels had 60 thousands runout the other had 28

[Skeet7373]

Road Dog that is tight. They do not have the directional 16" now. But for $903 with tires for 17" may not be a bad price. I just want something shiney, you know ladies like the bling!!

Karen

there are these but would be nicer in 17" and are 35mm offset http://www.americanracing.com/wheels...0.00&offset=35

[Rick Kay]

there are these but would be nicer in 17" and are 35mm offset http://www.americanracing.com/wheels...0.00&offset=35

Sharp wheels, they would look great on a trike!

[clint44]

Road Dog that is tight. They do not have the directional 16" now. But for $903 with tires for 17" may not be a bad price. I just want something shiney, you know ladies like the bling!!

Karen

there are these but would be nicer in 17" and are 35mm offset http://www.americanracing.com/wheels...0.00&offset=35

Just keep in mind the wheels with +35mm offset will not look quite like that wheel. The wheels in that link have very little offset so they have a decent amount of dish/lip. The same wheel with +35 will have the spokes almost out to the outer edge of the rim. Just something to keep in mind

[FuzzyWuzHe]

I just want something shiney, you know ladies like the bling!!

Karen

there are these but would be nicer in 17" and are 35mm offset http://www.americanracing.com/wheels...0.00&offset=35

Not just the ladies ... LOL ... been in many a trance over something shiney

[Skeet7373]

I understand about the offset. Its just the only option or chrome the 5 split spoke on the trike.

[clint44]

I understand about the offset. Its just the only option or chrome the 5 split spoke on the trike.

There are more wheel options than you think. It just really depends on your budget. Custom wheels can make or break any project so I try to never scrimp in that area. If you need any help,feel free to drop me a line.

Here is a similar wheel in a 17x7 size w/+38mm offset. http://www.eliteswheels.com/main/product_detail/3567
My next question is;what width wheel is on your trike now?

[Skeet7373]

This trike I'm looking at is 16".

[clint44]

This trike I'm looking at is 16".

If you don't mind staying with a 16",there is still a decent selection of wheels and tires available. 17"s,even more so.
Can you post a pic of your trike?

[07BlueCSC]

Any CSC built before late 2014 will require a wheel spacer to use a 16 X 7 wheel with 35 MM 0ffset. Changes were made late 2014 on the suspension so a 16 X 7 -- 35 MM offset will fit without wheel spacer.

[clint44]

Any CSC built before late 2014 will require a wheel spacer to use a 16 X 7 wheel with 35 MM 0ffset. Changes were
made late 2014 on the suspension so a 16 X 7 -- 35 MM offset will fit without wheel spacer.

Ok,what was the baseline offset?

[07BlueCSC]

Ok,what was the baseline offset?

The wheel that came on my 07 was a 15 X 6 1/2 inch, 5 on 100mm bolt pattern. 4 3/4 backspace. Tire size 205/60R15.

16 X 6 1/2, 35 mm offset fits with no problem. When I get the spacer from CSC, I will let you know how thick it is.