Hi, I'm Mike and I'm a Chromahualic!http://www.hdforums.com/forum/images.../icon_bike.gif
Very cool. I saw something like that (not nearly as nice) a few years ago.
Care to share the details on how it works?
Kevin
Here's one source, there are others
http://www.buy4car.com/products/led-...1400-1622.html
I bought them from Headlight Revolution for $72 a pair. I had some Stainless L brackets made and used 3M double stick tape and attached them to the inside of my rear fenders. It confuses people when they see them because the logo actually looks like it is projecting one side under the tire. I had looked at a lot of logo lights and found these which use a cree led which are a high quality led.
Hi, I'm Mike and I'm a Chromahualic!http://www.hdforums.com/forum/images.../icon_bike.gif
Thanks for the clue to mounting...I got a pair for my birthday...how did you wire then in...
Miss Mysterious...
2015 Mysterious Red Tri Glide...
Vance&Hines head pipe w/Rhinehart slipons...Slipstream Collection...DK Lift...11" Clearview w/ recurve...HD chrome Enforcers w/Goodyear Triple Tread Assurance...just a touch of chrome & LEDs...
The logo lights only come in one set off colors, orange and black with white letters. My leds change colors which make the logo lights look different depending on background colors.
Far as wiring I have my leds connected to a switch that is hot all the time. I tapped into that switch so I can have the lights on without needing the trike to be in accessory mode.
Hi, I'm Mike and I'm a Chromahualic!http://www.hdforums.com/forum/images.../icon_bike.gif
I bought a set of the ones that has the blue oval and put them under my running boards on our model A Really look COOL when at a stoplight!!
2014 Big Blue Pearl / Vivid Black, 1.5" Lift Brackets, Street Cannon Mufflers, 10" Wind Splitter Windshield, Daymaker LED Fog Lights, Passing and Fog Lamps work on both High and Low Beams, BAL-1R Rear Taillights, Dunlop American Elite Rear MT90B16 (34AE92) on Front turned backwards, Dynojet Power Vision Turner, De-Cat Headpipe just for a start.
No pics but it is a simple piece of metal that was bent 90 degrees to make an "L" The top of the bracket is about 1" above the light housing and the Width is about 1/4" wider on each side than the light housing. I spray painted it black and used 3M double stick tape to hold it in place. It is in the center of the inside of the front edge of the rear fender about 2" up from the bottom of the fenders edge.
Hi, I'm Mike and I'm a Chromahualic!http://www.hdforums.com/forum/images.../icon_bike.gif
Thank you