I'm wondering if this exhaust system would work with the Hannigan Transformer kit? Also If I can order the kit without the cut outs for the exhaust at the rear??
I'm wondering if this exhaust system would work with the Hannigan Transformer kit? Also If I can order the kit without the cut outs for the exhaust at the rear??
Life is Good but God is Great!!
Hard to tell the length just from the picture, but I'm pretty sure, almost certain even, that it will get into your rear fender. The Transformer body sits lower than most kits in the front and is notched to allow for the stock exhaust system to pass through a semi-circle cut out, and not straight underneath the body like most kits. On Clint's Transformer we had to notch the body even more due to his aftermarket exhaust system.
SORE SHOULDERS?
Get The Right Cure
TriGlide Rake Solutions
Get Info HERE
Support YOUR Trike Talk Forum Community & Get Upgraded Features & Free Merch with a Gold Club Membership!
Click Here For Information
Visit Cut-N-Shoot Customs Website
Text or Call Papa: (346) 800-7946
Email: info@cutnshootcustoms.com[/B]
This one looks <- shorter-> I wish i knew how to "photoshop"
Life is Good but God is Great!!
Life is Good but God is Great!!
Check out the vance and hinds big radius.
New Vance & And Hines Chrome Big Radius Full Exhaust Pipes Harley Dyna 1991-2005
Life is Good but God is Great!!
Just keep in mind that the exhaust tip cannot come back further than the passenger running boards as our boards are less than 1" from touching the rear fenders. However,if you are determined to run an exhaust system like Dirty Bird's,here's a couple of links that will help you find what you're looking for. I hang out over there,occasionally.
http://choppedbaggers.com/forums/forum.php http://custombaggerforum.com/forum/forum.php
We have worked on several bikes with this and several similar side exit 2/1 systems, I do not believe it would clear the fender. Another consideration when considering a side exit on a trike is that with the fenders and a turnout pipe that turbulence and airflow may direct exhaust gasses back toward the rider. A turndown or big radius may be a better option
I just wonder how much R&D time they spent to build a pipe which makes decent low end torque, vs just a pretty looking noise maker.
http://i1347.photobucket.com/albums/...pswnuweejq.jpg
Red Ultra Powered By Head-Quarters 120, Easy Clutch Pull By ClutchWIZ. 2012 GL1800 Hannigan. I've yet to ride a stock Harley which wasn't in need of a mechanical intervention.
here is a video of those exhaust and you can see how far back they go.
http://i25.photobucket.com/albums/c5...an_cross_f.jpg
20015 freewheeler
2005 113 pro twin super glide
2010 ss106 wide glide
2004 1800 VTX custom
2012 GW RS
I just talked to Jason @ Misfit. Their exhaust system will work if the collector is shortened.
What finish are you wanting,chrome or black?
A black pipe would make the job easier as lots of places out there can do high temp coatings. Shortening a chrome collector would also be easy also but getting it refinished would be more difficult. Not many chrome shops left anymore as the EPA has just about driven them all out of business.
If I were doing this,I would see if Dirty Bird would sell the exhaust to me in a bare metal configuration,shorten the collector,and then have the entire exhaust coated,by Jet-Hot Coatings. http://www.jet-hot.com/
Now,to ask the $64K question,Dave: will Hannigan build you a Transformer body without exhaust cut-outs?