Showing witness marks on the bolts-
FREE USA SHIPPING on Rocker Lockers - ALWAYS!
Go HERE to Get a Set for Your Bike!
Available for Sportster, Big Twin Evo, Twin Cam, AND Twin Cam w/ After-Market Support Plates!
Likes: 3
Thanks: 0
Ahh, just seeing this. Apologies for the delayed response.Originally Posted by FuzzyWuzHe
Yes, the rocker arm support plates are the same on all twin cams.
Showing witness marks on the bolts-
FREE USA SHIPPING on Rocker Lockers - ALWAYS!
Go HERE to Get a Set for Your Bike!
Available for Sportster, Big Twin Evo, Twin Cam, AND Twin Cam w/ After-Market Support Plates!
Yea Gang these really work. I installed them on my 110 2013 Twin Cam and was amazed at the difference in the noise. Great instructions.
Stallion #406 // 2013 Tri-Glide
Was the install rough? How long did the install take? Inquiring minds want to know
One more question, once they are installed, does that mean the shaft can never be removed? Or, is there a way to get the Rocker Locker out again? Maybe a punch from the other side.
Alan I have moderate mechanical skills. I do most of my own maintenance. My usual road block is not having a correct special tool.
This job the hardest part is knowing how to make sure that the cylinder both valves are fully closed. Easy for me because I've done it many times, but for a newbe they would need to be careful. Removing the gas tank is straight forward. Removing valve covers is also straight forward. Pick a cylinder make sure the valves are fully closed and remove the rocker arms. The rear cylinder 2 of the rocker bolts will not come all the way out but disengage the threads so they come out with the rocker arm assembly. follow the instructions to press in the sleeves and then re-assemble. Follow the notes and you will have no problem. Took a couple of hours working at my pace (slow)
Stallion #406 // 2013 Tri-Glide
With the sale and free shipping, I went ahead and ordered them ... worry about the install later ... how rough can it be???
I think you can handle it.With the sale and free shipping, I went ahead and ordered them ... worry about the install later ... how rough can it be???
Stallion #406 // 2013 Tri-Glide
I have a shop manual, both digital and 3 ring bound. I think this will be a good winter project ... LOL ... assuming I can do most of it sitting (with the new broken toe, standing is not that much fun... One step closer to making it a Gold Wing (at least sound like it) ... just kidding
You do have good quality inch pound and ft lb torque wrenches, if not get some nowI have a shop manual, both digital and 3 ring bound. I think this will be a good winter project ... LOL ... assuming I can do most of it sitting (with the new broken toe, standing is not that much fun
Nuff Said," Were Burnin Daylight, Lets Ride"(Sober 37 years)
Current ride : 2021 FREEWHEELER M8, oldest ride 1960 FL
I do ... I do ...You do have good quality inch pound and ft lb torque wrenches, if not get some now
I ordered these o the 9th, in my mailbox the 13th ... now to get well enough to feel like doing these ... LOL
Alan, you are still on my prayer chainI do ... I do ...
I ordered these o the 9th, in my mailbox the 13th ... now to get well enough to feel like doing these ... LOL
Nuff Said," Were Burnin Daylight, Lets Ride"(Sober 37 years)
Current ride : 2021 FREEWHEELER M8, oldest ride 1960 FL
FREE USA SHIPPING ON ROCKER LOCKERS, ALL THE TIME!
15.95 SHIPPED!
Also Available for Twin Cam w/ Aftermarket Support Plates!
Go HERE to Get A Set For Your Bike!
Posting Permissions
