Ok, I miss my fairing. Anyone put one on a Freewheeler?

[clint44]

I don't see how they would fit with turn signals.

That's why I asked.

[Dirtydan]

They fit with signal on my road king.

[Gorilla]

If there is a will there is a way. Remember HD used what they already had to put the freewheeler together so you just have to figure out what to change to make it work for you.

[DK Custom Products]

I have looked at your tank lifts and they are on the possible list of things to do, I will be snagging a set of your floorboard extenders in the near future... I saw them and really paid attention the last run I made and how my feet were always about half off the floorboards out to the sides. So it makes since to move them out a bit. Also looking at your heal rests... the list goes on.

Yeah, it can take a while to get one set up "just like you want".




Kevin

[psychogramps]

They fit with signal on my road king.

Different signal lights on the FW. You would have to drill/cut a 2.25'' hole in the center of the deflector.

[HDB0B]

Seen on Facebook ... not mine!

[Dirtydan]

Different signal lights on the FW. You would have to drill/cut a 2.25'' hole in the center of the deflector.

Or change the signals.

[hotrodbob]

Here is mine. It is a hoppe no radio.

[mernstmac]

Road Glide Freewheeler... I would love to see one

[Dirtydan]

http://www.ebay.com/sch/i.html?_from...iring&_sacat=0

besides the inner, outer and fairing mounts you'll need the interconnect harness for a road glide. Also the Freewheeler/road king main harness is different. Batwing &Road Glide main wiring harnesses are the same up until it hits the interconnect harness. Freewheeler/Road Kings hide everything in the headlight and gauges are on the tank so it's quite a bit different. If you're good with wiring than no biggie. Just depends on how bad you want it.

Try this
http://www.hdforums.com/forum/tourin...road-king.html

[cavie]

My DIY fork deflectors moved from my Suzuki C50 to my Honda VTX 1300. Total cost $40.00. you can make them flat as I did for the VTX or cut them to go around the turn signals as on the C50.

[HDB0B]

Check out http://www.wideopencustom.com/ ... I've seen a FLRT with it and it looks great.

Bob

[blackaxknight]

I recently installed a fairing on my freewheeler from wide open customs. I have to say I love it. It was less than $1k unpainted and I found a shop to paint it for $450 to match the trike. The fairing came with 4 speakers a stereo and all the wireing and mounting hardware.*

[TK8614]

I put one on and it is fantastic, they offer different kits.

https://www.deadcentercycles.com/

[HDB0B]

http://www.tsukayu.com/
http://www.recklessmotorcycles.com/new_products.html

Bob

[Hiram33]

the fairing on my Road King is removable but i hate riding with out it add one but in my opinion yuo do not need a full fairing no radio just block the wind

Peter

[clint44]

the fairing on my Road King is removable but i hate riding with out it add one but in my opinion you do not need a full fairing no radio just block the wind
Peter

A batwing fairing will offer considerably more wind protection.

[shadowrider99]

Hoppe has one and I put it on my . Works great. Put on and take off in 10 mins. Love it. Got the one without the radio and speakers. Put my own on.

[blackaxknight]

I put a wide open customs fairing on mine in January. It was easy to install and it came with 4 5.25" speakers and a jvc sterio. Sounds great at 85 looks great (had it painted it came bare plastic) total for the fairing was $997 paint was $450 I installed it myself (very simple if you hade ever wired in a car sterio you can do this)
http://www.wideopencustom.com/p-125-harley-davidson-freewheeler-fairing.aspx

[Spotts71]

Google road glide fairing conversion. There is a two part PDF you can download. It's not as simple though as just dropping it on. There is an interconnect harness and everything is completely different than a free wheeler/road King front end. Not to mention the gas tank. That being said lots of guys have done it.

I bought a Road Glide CVO fairing with all the inners to add to my 2018 FW. I love the look of the shark nose but not really the batwing. Also wanting to put the Hannigan conversion on the back end. Still asking lots of questions to even see if that is possible.I haven’t seen much on either on a Freewheeler- started searching here today to see what I could find to help. I would love to see pictures if there are any.