let the countdown begin.........
Likes: 12
Thanks: 0
let the countdown begin.........
The latest is . . .
The bad news is the trike probably won't come home until Tues. The good news is that progress is still being made. Their paint guy has been out sick so the items he is responsible for didn't get started until today. Supposedly he'll come in on Sat. so the body can go on Mon. The EZ Steer went on today and the front wheel should have been replaced before COB. I did notice the coolant tank was relocated. I can't wait to find out how to access the coolant tank after the body goes on.
This is not a pretty view.
What happened to my front wheel???
Nice rake!
Funny place to put an overflow tank.
I wonder if I can get them to pay a penalty for missing my BD?
Tryke Flyer!
2010 GW 1800 with 2010 CSC Cobra kit
2010 Kawasaki Voyager ABS with 2016 CSC Kruze Kit - Gone but definitely not forgotten.
Gettin' there...
The overflow will be accessed from under the seat when done... Easy to get to.
"I don't need a map. I still have a road in front of me!"
Wasted days and wasted nights . . .
OK, not really wasted. The paint guy was out sick again today so the shop concentrated on catching up on other work that is pending. Delivery on Tues. may be in jeopardy? The front wheel returned to its rightful place yesterday. That's the extent of the progress.
Dang that rake looks kool!
It may be interesting to see what Mon. brings.
Interesting note: They have a '09 Voyager in the shop that needed to have the reverse replaced. The replacement can be done by pulling the wheels. The body doesn't have to be removed first. I don't know if this was warranty work or not. During our discussion the mechanic cautioned against "abusing" reverse. Baby that puppy and it will last otherwise it could be spendy.
Tryke Flyer!
2010 GW 1800 with 2010 CSC Cobra kit
2010 Kawasaki Voyager ABS with 2016 CSC Kruze Kit - Gone but definitely not forgotten.
CSC advises to put your foot on the rear brake and then engage the reverse, then let off and on the brake to control backup speed instead of letting on and off the reverse button so the reverse seleniod isn't kicking the reverse unit in and out to save wear out tear on the unit and you shouldn't have any issues.
"I don't need a map. I still have a road in front of me!"
Originally Posted by ol' school
Interesting, not only will I keep that in mind but I'll also share that with the mechanic at the shop. Thanks.
Tryke Flyer!
2010 GW 1800 with 2010 CSC Cobra kit
2010 Kawasaki Voyager ABS with 2016 CSC Kruze Kit - Gone but definitely not forgotten.
Gettin' there...
The overflow will be accessed from under the seat when done... Easy to get to.
That's what I figured. Thanks.
- - - Updated - - -
That must be another one of those RTFM items in the manual I don't have yet.
Tryke Flyer!
2010 GW 1800 with 2010 CSC Cobra kit
2010 Kawasaki Voyager ABS with 2016 CSC Kruze Kit - Gone but definitely not forgotten.
Actually I learned that the hard way. I was told that by my dealer as I had an issue with a broken belt on the reverse unit due to a defective belt (somehow it had got nicked during the install). When the new belt was installed CSC then "added that info" on the "best way to preserve the belt and reverse unit". I was not told that before and it wasn't info in the manual.That must be another one of those RTFM items in the manual I don't have yet.
Oh BTW, you are going to be surprised how fast the reverse is the first time you try it.
"I don't need a map. I still have a road in front of me!"
Hmmm, so if there's a chink in CSC's armor it's lack of documentation? I wonder what else we don't know that we don't know? All this caused me to revisit the CSC website and this is what I found:
Electric ReverseInstallation Instructions
REVISED 1 - 2016
"Operating the Electric Reverse:
1. With the Trike in neutral. Start the engine.
2. Depress the reverse switch and the red LED will lightup.
3. Press the start button and the trike will then back up.
4. If the brakes are applied the reverse will pause untilthe brakes are no longer being used."
Is that in line with the way yours operates?
I was surprised to find CSC uses stick on weights to balance the wheels. I didn't know that practice was still in use, the weight makers must have gone to better stickum.
Thanks to your prior warning reverse speed is one of the things I checked out during the test ride last month.
Tryke Flyer!
2010 GW 1800 with 2010 CSC Cobra kit
2010 Kawasaki Voyager ABS with 2016 CSC Kruze Kit - Gone but definitely not forgotten.
Yes, that is how mine works.
CSC says it is better on the reverse unit to use the brake to pause the reverse instead of letting on and off the starter button when you are backing up is how I should have wrote it. You would think they ought to have that in their instructions instead of word of mouth though.
"I don't need a map. I still have a road in front of me!"
No news today 2Paps?
BTW, Happy Belated Birthday! 🎂
"I don't need a map. I still have a road in front of me!"
Ol' school,
Thank you for the BD wishes.
You're right, no new reportable news yesterday. The painter did live thru his bout with the flu and looked pretty good today. He was hard at work taping and painting a Kruze body and a set of lower fairings for a Voyager. Now who might that belong to? The body won't be ready to go on the trike until Thurs. I might not get delivery until Mon.
The black coat is done.
This guy is meticulous with the tape! Getting ready to shoot the red.
Ah, there's some RED! I'm having the lowers ArmorCoated along with the fenders on the body.
Tryke Flyer!
2010 GW 1800 with 2010 CSC Cobra kit
2010 Kawasaki Voyager ABS with 2016 CSC Kruze Kit - Gone but definitely not forgotten.
At least he is back at it. The red in the last pic looks good!
"I don't need a map. I still have a road in front of me!"
Gettin close now!
We got paint!
There is no clear coat on the above.
This has clear coat!
In case you're wondering what's inside the "can" forward of the CSC muffler this is it. That's all that's left of the Kawi exhaust!
There was a cap on the end but CSC said to cut it off.
Tryke Flyer!
2010 GW 1800 with 2010 CSC Cobra kit
2010 Kawasaki Voyager ABS with 2016 CSC Kruze Kit - Gone but definitely not forgotten.
Lookin' good so far!
"I don't need a map. I still have a road in front of me!"
Was there any muffler packing/ insulation around the baffle shown in the front part of the muffler when the exhaust was cut? Lookin good. thanks and safe riding.
Nope! Not a single bit.
Tryke Flyer!
2010 GW 1800 with 2010 CSC Cobra kit
2010 Kawasaki Voyager ABS with 2016 CSC Kruze Kit - Gone but definitely not forgotten.
Today was kinda a dud. The lowers were replaced on the trike and the body was clear coated. Talked to the owner who said they were shooting for Mon. or Tues. to deliver the fully tested trike to me.
Lower fairings clear coated and installed.
Tryke Flyer!
2010 GW 1800 with 2010 CSC Cobra kit
2010 Kawasaki Voyager ABS with 2016 CSC Kruze Kit - Gone but definitely not forgotten.
Guess they were sittin' around watchin' paint dry...Takes time...
"I don't need a map. I still have a road in front of me!"
Anticipation!!
Posting Permissions
