I have a solex 34 pict 3 carb can someone tell how to setup the choke. At the moment when starting from cold the choke is fully closed as you would expect, as the engine runs it quickly get bogged down with to much fuel as the butterfly is closed.
I have to manually hold the butterfly open, after a few minutes the heating coil lets the choke open and the engine runs ok.
The heater takes about five minutes to fully heat up which seems to long. As a way round this i have rotated the heater so that the butterfly is half open at cold and this seems to work.
Once i got the engine fully warmed up i adjusted throttle stop crew that locates against the choke cam. I then adjusted the BIG air screw followed by the mixture screw, it is running a treat, best it ever has in fact.
I have follwed this from a workshop manual but there is very little said about the choke.