Does anyone know why the billet engine mount bracket(16205-10) doesn't fit trikes ? I am not seeing why, seems to fit like it should, actually fits better my way. (I had bought a real cheap one flaking chrome on ebay and had it pcoated black, profitable if it didn't fit)
their way-
From left side of the motorcycle use a three foot length of 2x4 wood as a pry bar. Insert the flat side of the wood between the left frame down tube and front cylinder. Use just enough pressure to move the motor slightly to the right and install the long screw (5) and washer (4) in the lower right side of the bracket.
my way-
use a chrome SHCS.(I always try to replace everything with chrome bolts).