150 Most Recent Posts

Thread AuthorPostersPost AuthorForumThread/Post Link
agapsdiver6scuzziHarley Freewheeler /...Completed Project: 2024 RG3 added T...
scuzzi2scuzziHarley Tri GlideTri Glide extended reach seat
Aging Gracefully1Aging GracefullyHarley Freewheeler /...switching Tri-Glide for Road Glide ...
agapsdiver6trike ladyHarley Freewheeler /...Completed Project: 2024 RG3 added T...
David35754WarpedThe Gun EnthusiastJust Gun Memes
agapsdiver6GorillaHarley Freewheeler /...Completed Project: 2024 RG3 added T...
Gfitzz536ROAD DOGGeneral Harley Chatengine oil transfer to primary side...
Gfitzz536Gfitzz53General Harley Chatengine oil transfer to primary side...
Amputee552ultrafxrHarley Tri GlideGas tank removal to replace handleb...
Rawhideken5ROAD DOGHarley Tri Glide2024 Tri glide
Amputee552Amputee55Harley Tri GlideGas tank removal to replace handleb...
Rawhideken5Peter A.Harley Tri Glide2024 Tri glide
Rawhideken5RawhidekenHarley Tri Glide2024 Tri glide
agapsdiver6agapsdiverHarley Freewheeler /...Completed Project: 2024 RG3 added T...
David35754rhino 2The Gun EnthusiastJust Gun Memes
David35754SullyThe Gun EnthusiastJust Gun Memes
SHARKDIVER2SHARKDIVERGeneral Harley Chatsuper shox
Rawhideken5Old Road DogHarley Tri Glide2024 Tri glide
Mykneesbehurtin9NotgrownupHarley Tri GlideTri Glide Reverse Motor
MDO100Freewheeling_Dude!Harley Freewheeler /...What Did You Do To Your Freewheeler...
Rawhideken10ol' schoolNew Member Introduct...Hi all new to this site ! hope I do...
consitter75Papa ZookGeneral DiscussionLate nighters---unite!!!
consitter75rhino 2General DiscussionLate nighters---unite!!!
Rawhideken10scuzziNew Member Introduct...Hi all new to this site ! hope I do...
consitter75Marc HGeneral DiscussionLate nighters---unite!!!
consitter751dn5upGeneral DiscussionLate nighters---unite!!!
Rawhideken10Marc HNew Member Introduct...Hi all new to this site ! hope I do...
Rawhideken10trike ladyNew Member Introduct...Hi all new to this site ! hope I do...
David35754Uncle FesterThe Gun EnthusiastJust Gun Memes
Mykneesbehurtin9rhino 2Harley Tri GlideTri Glide Reverse Motor
agapsdiver6RKplus10Harley Freewheeler /...Completed Project: 2024 RG3 added T...
Rawhideken10hardwickbvNew Member Introduct...Hi all new to this site ! hope I do...
Rawhideken10SullyNew Member Introduct...Hi all new to this site ! hope I do...
Rawhideken10Uncle FesterNew Member Introduct...Hi all new to this site ! hope I do...
agapsdiver6Papa ZookHarley Freewheeler /...Completed Project: 2024 RG3 added T...
agapsdiver6agapsdiverHarley Freewheeler /...Completed Project: 2024 RG3 added T...
agapsdiver6agapsdiverHarley Freewheeler /...Completed Project: 2024 RG3 added T...
agapsdiver6agapsdiverHarley Freewheeler /...Completed Project: 2024 RG3 added T...
DK Custom Products362ultrafxrHarley Tri GlideWhat did you do to Your Tri-Glide T...
Rawhideken10rhino 2New Member Introduct...Hi all new to this site ! hope I do...
DK Custom Products362ultrafxrHarley Tri GlideWhat did you do to Your Tri-Glide T...
Rawhideken5ROAD DOGHarley Tri Glide2024 Tri glide
Rawhideken5TrampasHarley Tri Glide2024 Tri glide
Rawhideken5RawhidekenHarley Tri Glide2024 Tri glide
Rawhideken5ROAD DOGHarley Tri Glide2024 Tri glide
JerseyGirlRider9Papa ZookHarley Freewheeler /...Road Glide 3 - Is this normal?
JerseyGirlRider9RKplus10Harley Freewheeler /...Road Glide 3 - Is this normal?
Rawhideken10Papa ZookNew Member Introduct...Hi all new to this site ! hope I do...
Rawhideken10RawhidekenNew Member Introduct...Hi all new to this site ! hope I do...
Rawhideken5RawhidekenHarley Tri Glide2024 Tri glide
Rawhideken10Papa ZookNew Member Introduct...Hi all new to this site ! hope I do...
GPz11002GPz1100General DiscussionHonda Valkyrie Conversions
Gfitzz536ROAD DOGGeneral Harley Chatengine oil transfer to primary side...
Rawhideken10RawhidekenNew Member Introduct...Hi all new to this site ! hope I do...
Sully1SullyGeneral DiscussionHAPPY St. PATRICKS DAY
Gfitzz536Gfitzz53General Harley Chatengine oil transfer to primary side...
GPz11009hardwickbvNew Member Introduct...I'm Back
DrCrazyTrain12hardwickbvNew Member Introduct...Introduction
Hogman196tpb857Harley Tri GlideCobra # 6256 Pro chamber headpipes
ISP-FL2NotgrownupHarley Tri GlideMaybe Not Correct Fitment
Mykneesbehurtin9ISP-FLHarley Tri GlideTri Glide Reverse Motor
ISP-FL2ISP-FLHarley Tri GlideMaybe Not Correct Fitment
Bouncer9ISP-FLHarley Tri GlideDrive Belt Replacement Time
Gfitzz536ROAD DOGGeneral Harley Chatengine oil transfer to primary side...
Gfitzz536ROAD DOGGeneral Harley Chatengine oil transfer to primary side...
Gfitzz536Gfitzz53General Harley Chatengine oil transfer to primary side...
Bouncer9NotgrownupHarley Tri GlideDrive Belt Replacement Time
ISP-FL2NotgrownupHarley Tri GlideMaybe Not Correct Fitment
consitter751dn5upGeneral DiscussionLate nighters---unite!!!
JerseyGirlRider9NotgrownupHarley Freewheeler /...Road Glide 3 - Is this normal?
Chief80138NotgrownupHarley Tri GlideHow many miles on your Triglide?
GPz11009NotgrownupNew Member Introduct...I'm Back
SHARKDIVER2NotgrownupGeneral Harley Chatsuper shox
Notgrownup3NotgrownupHarley Tri GlideClutch lever not touching the safet...
DK Custom Products362NotgrownupHarley Tri GlideWhat did you do to Your Tri-Glide T...
GPz11009hogmemberisoldNew Member Introduct...I'm Back
GPz11002Papa ZookGeneral DiscussionHonda Valkyrie Conversions
GPz11009trike ladyNew Member Introduct...I'm Back
consitter75consitterGeneral DiscussionLate nighters---unite!!!
GPz11009SullyNew Member Introduct...I'm Back
Chief80138RKplus10Harley Tri GlideHow many miles on your Triglide?
Oldrodder2Marc HHarley Trike Convers...Pingel electric shift
14TG214TGHarley Tri GlideValve stem clearance
Oldrodder4Papa ZookHarley Trike Convers...2006 CVO with M/T Gladiator with el...
GPz11009Marc HNew Member Introduct...I'm Back
14TG2Papa ZookHarley Tri GlideValve stem clearance
14TG214TGHarley Tri GlideValve stem clearance
Chief80138rhino 2Harley Tri GlideHow many miles on your Triglide?
GPz11009rhino 2New Member Introduct...I'm Back
consitter75ZammyGeneral DiscussionLate nighters---unite!!!
GPz11009ZammyNew Member Introduct...I'm Back
GPz11009GPz1100New Member Introduct...I'm Back
Gfitzz536ROAD DOGGeneral Harley Chatengine oil transfer to primary side...
GPz11002GPz1100General DiscussionHonda Valkyrie Conversions
JerseyGirlRider9JerseyGirlRiderHarley Freewheeler /...Road Glide 3 - Is this normal?
Chief80138Artpe54Harley Tri GlideHow many miles on your Triglide?
DK Custom Products362NotgrownupHarley Tri GlideWhat did you do to Your Tri-Glide T...
Notgrownup3NotgrownupHarley Tri GlideClutch lever not touching the safet...
SHARKDIVER2SHARKDIVERGeneral Harley Chatsuper shox
Rogue16Rogue1Harley Tri GlidePowder coating
Oldrodder2OldrodderHarley Trike Convers...Pingel electric shift
consitter75trike ladyGeneral DiscussionLate nighters---unite!!!
Papa Zook96Phu CatBBQ, Grilling, Cooki...Whats for supper?
Noodles1076Phu CatHarley Freewheeler /...Battery ??
Rogue16David792Harley Tri GlidePowder coating
Gfitzz536Gfitzz53General Harley Chatengine oil transfer to primary side...
Gfitzz536Gfitzz53General Harley Chatengine oil transfer to primary side...
Papa Zook96SullyBBQ, Grilling, Cooki...Whats for supper?
DK Custom Products362Jd1aHarley Tri GlideWhat did you do to Your Tri-Glide T...
Gfitzz536Dan SCGeneral Harley Chatengine oil transfer to primary side...
Gfitzz536ROAD DOGGeneral Harley Chatengine oil transfer to primary side...
ISP-FL10cycle7447General Harley ChatDealer Charging For CC usage
Burnerboy4BurnerboyRoadsmith Trikes
...
I finally got my TRIKE out of hiber...
Noodles1076Old Road DogHarley Freewheeler /...Battery ??
DrCrazyTrain12CCjonNew Member Introduct...Introduction
ISP-FL10rhino 2General Harley ChatDealer Charging For CC usage
consitter75rhino 2General DiscussionLate nighters---unite!!!
DK Custom Products362Jarhead82Harley Tri GlideWhat did you do to Your Tri-Glide T...
Papa Zook2GorillaGeneral DiscussionNew Dedicated Motor Trike, Hannigan...
Rogue1614TGHarley Tri GlidePowder coating
Noodles1076Papa ZookHarley Freewheeler /...Battery ??
Burnerboy4tourmanRoadsmith Trikes
...
I finally got my TRIKE out of hiber...
GPz11002Papa ZookGeneral DiscussionHonda Valkyrie Conversions
Noodles1076WindyOneHarley Freewheeler /...Battery ??
consitter75trike ladyGeneral DiscussionLate nighters---unite!!!
Noodles1076Noodles107Harley Freewheeler /...Battery ??
Rogue16JTJerseyHarley Tri GlidePowder coating
ISP-FL10BurnerboyGeneral Harley ChatDealer Charging For CC usage
Gfitzz536MykneesbehurtinGeneral Harley Chatengine oil transfer to primary side...
GPz11002GPz1100General DiscussionHonda Valkyrie Conversions
ISP-FL10My TurnGeneral Harley ChatDealer Charging For CC usage
ISP-FL10cycle7447General Harley ChatDealer Charging For CC usage
Gfitzz536Gfitzz53General Harley Chatengine oil transfer to primary side...
Gfitzz536ROAD DOGGeneral Harley Chatengine oil transfer to primary side...
Noodles1076ROAD DOGHarley Freewheeler /...Battery ??
ISP-FL10ROAD DOGGeneral Harley ChatDealer Charging For CC usage
ISP-FL10JTJerseyGeneral Harley ChatDealer Charging For CC usage
Papa Zook2Papa ZookGeneral DiscussionNew Dedicated Motor Trike, Hannigan...
Oldrodder4OldrodderHarley Trike Convers...2006 CVO with M/T Gladiator with el...
JerseyGirlRider9JerseyGirlRiderHarley Freewheeler /...Road Glide 3 - Is this normal?
ISP-FL10KrazeehorseGeneral Harley ChatDealer Charging For CC usage
Papa Zook2Papa ZookGeneral DiscussionNew Dedicated Motor Trike, Hannigan...
Noodles1076Noodles107Harley Freewheeler /...Battery ??
Noodles1076Papa ZookHarley Freewheeler /...Battery ??
Noodles1076Noodles107Harley Freewheeler /...Battery ??
JerseyGirlRider9Papa ZookHarley Freewheeler /...Road Glide 3 - Is this normal?
Rogue16Rogue1Harley Tri GlidePowder coating
Rogue16PanheadSteveHarley Tri GlidePowder coating
ISP-FL10rhino 2General Harley ChatDealer Charging For CC usage
Gfitzz536rhino 2General Harley Chatengine oil transfer to primary side...
Likes Likes:  5
Thanks Thanks:  0
Results 1 to 12 of 12

Thread: another new noise

  1. #1
    200+ Posts
    Join Date
    Apr 2015
    Location
    pineville, la
    Posts
    201
    Thanks
    0
    Thanked 0 Times in 0 Posts

    Default another new noise

    I had posted about a vibration issue and I think I solved it. Saturday I pulled my pipes off ( to repaint them and get them out of the way to adjust my valves). I took the nut off that holds the fan on and checked around where the fan bolts up with my inspection mirror to check for cracks in the fan but it look fine. I put the nut back on and torqued it to 40 ft lbs. I put everything back together and still had the vibration and picked up another rattling type noise that I didn't have. I found out ( I think) the vibration noise starting around 1700 rpm was the alternator strap wasn't tight enough. I actually broke the one on it tightening it up because I didn't think it was tight enough. I put a used one on it tightened it up good and the vibration seems to be gone but I have a rattling or jingling type sound coming for the alternator, fan pulley area. I reached inside the fan shroud and felt the fan and it seems tight. When it is running I can see the fan and it looks like it is running true. I know I need a new alternator pulley and I have one coming. I can't get the adjustment right on the belt. It is tight then loose when rolling the motor over by hand.
    I took the belt off started it up and the noise is gone. Could the pulley be making the alternator make a noise. It is a fairly new alternator. I don't feel any bearing slack in either end. I am going to put my new pulley and belt on when it gets here and see if that helps. What gets me is it wasn't making this noise before. I may pull the fan nut off again and make sure I have everything right. I can't believe the fan would have just broke or the alternator went bad. Any suggestions. Thanks

  2. #2
    400+ Posts
    Gold Club Member
    Sidecarbill's Avatar
    Join Date
    Feb 2015
    Location
    Sussex nj usa
    Posts
    2,548
    Thanks
    0
    Thanked 0 Times in 0 Posts

    Default

    You are putting the shim washers between the pulley halves correct? The amount of washers never changes just their position.

  3. #3
    200+ Posts
    Join Date
    Apr 2015
    Location
    pineville, la
    Posts
    201
    Thanks
    0
    Thanked 0 Times in 0 Posts

    Default another new noise

    Yeah I am running a total of 10 shims. Right now I have three between the two halves that amount to about .085 thousandths. The rest are on the outside.I am running a 11.3 x 912 belt which I believe you run with a alternator. I wish my new pulley would get here so I can try that. There has to be something wrong with my pulley for the belt to be loose and tight.
    Quote Originally Posted by Sidecarbill View Post
    You are putting the shim washers between the pulley halves correct? The amount of washers never changes just their position.

  4. #4
    1000+ Posts
    VW Tech Contributor
    stinger608's Avatar
    Join Date
    Jan 2014
    Location
    Cheyenne Wyoming USA
    Posts
    1,136
    Thanks
    0
    Thanked 0 Times in 0 Posts

    Default

    Maybe the pulley is bent or something. Probably good that you ordered a new one.

    When you pulled the fan, did you by chance check the dividers inside the dog house? I remember years ago, a customer came in with a rattle and we chased it for a couple of days before finding one of the dividers inside the dog house had let go.

    They, as I recall, are just spot welded to the outer walls of the dog house. Seems like there are 2 of them inside the dog house.

  5. #5
    200+ Posts
    Join Date
    Apr 2015
    Location
    pineville, la
    Posts
    201
    Thanks
    0
    Thanked 0 Times in 0 Posts

    Default new noise

    I didn't check anything in the doghouse. I just loosened the nut, took it off and looked where the fan fits on the fan adapter for the alternator to see if if was cracked. I didn't see anything so I put the nut back on and torqued it to 40 ft. lbs. I may just take the alternator and fan out so I can see in the doghouse and see if I see anything it this new pulley doesn't fix my problem. I have a aftermarket chrome type doghouse. Will it have dividers in it also? It does sound like it could be something loose. Kind of like putting some washers in a tin can and rattling it if that makes sense. Running me crazy but I am going to find it. Thanks for the suggestions.
    Quote Originally Posted by stinger608 View Post
    Maybe the pulley is bent or something. Probably good that you ordered a new one.

    When you pulled the fan, did you by chance check the dividers inside the dog house? I remember years ago, a customer came in with a rattle and we chased it for a couple of days before finding one of the dividers inside the dog house had let go.

    They, as I recall, are just spot welded to the outer walls of the dog house. Seems like there are 2 of them inside the dog house.

  6. #6
    1000+ Posts
    VW Tech Contributor
    stinger608's Avatar
    Join Date
    Jan 2014
    Location
    Cheyenne Wyoming USA
    Posts
    1,136
    Thanks
    0
    Thanked 0 Times in 0 Posts

    Default

    Yep, all the dog houses have the dividers. They direct air flow down toward the cylinder heads.

    Being one of the aftermarket chrome types, I could see one of em breaking loose. That would for sure cause such a sound. A lot of them are very cheaply made.

    The air would push a broken one away and it would bounce back and forth making a "washers in a tin can" sound.

  7. #7
    100+ Posts
    Join Date
    Sep 2016
    Location
    Sitka, Alaska USA
    Posts
    128
    Thanks
    0
    Thanked 0 Times in 0 Posts

    Default

    when I worked for VW we had a bug come in with a horrible vibration. the problem went away when I disconnected the fan belt. I reached around and felt inside the fan. There was a wad of -- yes -- centrifuged squirrel in the squirrel cage fan. I didn't clean it out.

    If the belt goes tight and loose per revolution, a pulley shiv is not centered. Find out if your loose/tight follows the crank or alternator shiv. That will be the troublemaker.

    Also, the alt pulley may have a wide and narrow slot to mate up the halves. If you're mis-indexed, that will take the shiv center away from the pulley center. Having a shim slip during pulley assembly will do the same thing.

    You really do not need or want a 'tight' belt to the alternator. You should be able to deflect the belt about 3/8" when it's set up properly.

    My WAG is that either the fan is badly out of balance/bent/missing a fin or at some point the belt was overtightened against an off-centered shiv and has compromised the alternator bearings by excessively sideloading them.

    $0.02

  8. #8
    200+ Posts
    Join Date
    Apr 2015
    Location
    pineville, la
    Posts
    201
    Thanks
    0
    Thanked 0 Times in 0 Posts

    Default noise

    The divider thing could be it. My luck would be something like that. Can I tell if I pull the alternator and fan out? and look and feel inside the dog house to feel for any loose parts. I'll check the shims and make sure they are centered rodekyll, what do you mean by a pulley shiv not centered? And if the loose tight follows the crank or alternator shiv. Without the belt on the alternator feels good . No play in either end up and down. I'll keep posting. Thanks
    Quote Originally Posted by rodekyll View Post
    when I worked for VW we had a bug come in with a horrible vibration. the problem went away when I disconnected the fan belt. I reached around and felt inside the fan. There was a wad of -- yes -- centrifuged squirrel in the squirrel cage fan. I didn't clean it out.

    If the belt goes tight and loose per revolution, a pulley shiv is not centered. Find out if your loose/tight follows the crank or alternator shiv. That will be the troublemaker.

    Also, the alt pulley may have a wide and narrow slot to mate up the halves. If you're mis-indexed, that will take the shiv center away from the pulley center. Having a shim slip during pulley assembly will do the same thing.

    You really do not need or want a 'tight' belt to the alternator. You should be able to deflect the belt about 3/8" when it's set up properly.

    My WAG is that either the fan is badly out of balance/bent/missing a fin or at some point the belt was overtightened against an off-centered shiv and has compromised the alternator bearings by excessively sideloading them.

    $0.02

  9. #9
    100+ Posts
    Join Date
    Sep 2016
    Location
    Sitka, Alaska USA
    Posts
    128
    Thanks
    0
    Thanked 0 Times in 0 Posts

    Default

    I mean that the pulley halves (shivs) are not spinning on the same center and in the same plane as the alternator shaft. The most common reason is that the two shivs (pulley halves) are misaligned -- either the big tab/little tab in the wrong holes, a shim slipped keeping the shivs from mating, one shive is warped, the alternator shaft is bent, or that 'bell' washer that goes directly behind the pulley nut slipped. Any of the above will result in the belt running deeper (looser) at one point of rotation and higher (tighter) at some other point. Of course that's going to ruin the rotational balance and cause a harmonic vibration. It can also get the fan thrashing and scraping on the edges of doghouse stuff.

    This can happen with the alternator otherwise feeling 'normal' when the belt is removed, since it's the relationship of the belt to the pulleys that's the problem in my WAG scenario. The trick is to watch the pulleys go 'round at low (starter) speeds (belt installed) to see if you can eyeball the wobble. Once you can see it you can kill it.

    Yes, you can get you hand in the big doghouse hole if you get the alternator and flange out. Depending on what-all you've got going on back there equipment-wise that could be much easier said than done. The doghouse might need to be unbolted and lifted to clear the alternator pedestal. If you have the heat flaps installed you have to pull the thermostats bellows and linkage to lift the shroud. The throttle cable can get bound and kinked whenever you tinker with the shroud. So be careful with it! Different carb/injection setups can make removing the intake and other things necessary, too. So I wouldn't pull the alternator until I was convinced that I had to. Checking the pulley stuff has a high enough percentage that I'd try that first.

    Another way to check for loose baffles is to tap the doghouse here and there and listen for the loose panel to reveal itself. Quite often you can hear or feel the troublemaker flap as you tap.

    That's all I've got right now. I'm working on a superbeetle right now. Engine is out and (oem) fan shroud is removed. If you need me to look at anything in the unseeable behinds of the engine, let me know. It goes back together thurs/fri.

  10. #10
    200+ Posts
    Join Date
    Apr 2015
    Location
    pineville, la
    Posts
    201
    Thanks
    0
    Thanked 0 Times in 0 Posts

    Default another new noise

    Thanks rodekyll. I have one of the aftermarket pulleys. I went and checked it awhile ago. The way it is made it will only go on one way. The outside pulley is rounded on one part of the hole and flat on the other end. I wish I could find an original type pulley.
    I didn't think to just check it with the coil wire pulled and just let it turn over and see if I can tell anything. I will do that tomorrow. I can see on the alternator where the pulley has scraped it but I don't know when. I am not going to do anything until I get the new pulley on and hope that fixes it. I hope it comes in tomorrow. As soon as I put on I'll repost with the results. Thanks for the help.
    Quote Originally Posted by rodekyll View Post
    I mean that the pulley halves (shivs) are not spinning on the same center and in the same plane as the alternator shaft. The most common reason is that the two shivs (pulley halves) are misaligned -- either the big tab/little tab in the wrong holes, a shim slipped keeping the shivs from mating, one shive is warped, the alternator shaft is bent, or that 'bell' washer that goes directly behind the pulley nut slipped. Any of the above will result in the belt running deeper (looser) at one point of rotation and higher (tighter) at some other point. Of course that's going to ruin the rotational balance and cause a harmonic vibration. It can also get the fan thrashing and scraping on the edges of doghouse stuff.

    This can happen with the alternator otherwise feeling 'normal' when the belt is removed, since it's the relationship of the belt to the pulleys that's the problem in my WAG scenario. The trick is to watch the pulleys go 'round at low (starter) speeds (belt installed) to see if you can eyeball the wobble. Once you can see it you can kill it.

    Yes, you can get you hand in the big doghouse hole if you get the alternator and flange out. Depending on what-all you've got going on back there equipment-wise that could be much easier said than done. The doghouse might need to be unbolted and lifted to clear the alternator pedestal. If you have the heat flaps installed you have to pull the thermostats bellows and linkage to lift the shroud. The throttle cable can get bound and kinked whenever you tinker with the shroud. So be careful with it! Different carb/injection setups can make removing the intake and other things necessary, too. So I wouldn't pull the alternator until I was convinced that I had to. Checking the pulley stuff has a high enough percentage that I'd try that first.

    Another way to check for loose baffles is to tap the doghouse here and there and listen for the loose panel to reveal itself. Quite often you can hear or feel the troublemaker flap as you tap.

    That's all I've got right now. I'm working on a superbeetle right now. Engine is out and (oem) fan shroud is removed. If you need me to look at anything in the unseeable behinds of the engine, let me know. It goes back together thurs/fri.

  11. #11
    200+ Posts
    Join Date
    Apr 2015
    Location
    pineville, la
    Posts
    201
    Thanks
    0
    Thanked 0 Times in 0 Posts

    Default another new noise

    I think I found out what my noise was. Fan was cracked. I don't believe I had the alternator strap tight and it let everything vibrate. I put on a new fan, alternator pulley and new belt. Going to road test it tomorrow. I have another question and I am going to post it under (cylinders 2 & 4 running lean) Thanks for all the help.

  12. #12
    1000+ Posts
    VW Tech Contributor
    stinger608's Avatar
    Join Date
    Jan 2014
    Location
    Cheyenne Wyoming USA
    Posts
    1,136
    Thanks
    0
    Thanked 0 Times in 0 Posts

    Default

    Quote Originally Posted by starrider1946 View Post
    I think I found out what my noise was. Fan was cracked

    Oh, hell yea!! That will do it, man. Every time. LOL

Similar Threads

  1. Noise above 60 mph
    By Kentosh in forum Honda Trikes
    Replies: 6
    Last Post: 07-18-2016, 10:55 AM
  2. Noise again!
    By barnabus in forum Honda Trikes
    Replies: 4
    Last Post: 09-15-2015, 01:57 PM
  3. Noise
    By Yellowsubmarine in forum Honda Trikes
    Replies: 1
    Last Post: 09-08-2015, 05:50 PM
  4. Noise With the BT-45
    By FRR in forum Honda Trikes
    Replies: 9
    Last Post: 05-09-2015, 06:21 PM
  5. What was that noise ?
    By Rollin Thunder in forum Harley Trike Conversions
    Replies: 5
    Last Post: 08-31-2013, 07:39 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •