installed bags for lowers

[Trampas]

This is what I did today. Got the bags for a total of $84.75 and I bought new lower doors also, around $35, needed something for cigs, glasses, etc etc. I know quite a bit of money but I didn't want a windshield bag since they don't work good on the rushmore models and this fit the bill for me at least. I used the brackets that came with them and drilled the holes in the panel doors and installed the bracket with the 4 screws and nuts. Time will tell if I like them or not, with bracket on they stick out a little from panel and maybe later will drill some holes in the bag to get it more flush but right now they will work for me. The bags came from Big Bike Parts and the honda dealer in town is a dealer for them. They are selling these in a package deal for the 2014 and up for harley's. Basically you can get single ones and the price is about half of this. I wanted 2 of them so went to honda dealer and ordered them to save on shipping.

All for now Trampas

[scuba1954]

I went to big bike and couldn't find these pouches for my 14 trike. Can you post a link or give the part number?

[LadyonaMission]

Hi, I'm Mike and I'm a Chromahualic!

Looks to me like you are more than just a Chromahaulic.

[Trampas]

Go to www.bigbikeparts.com and type in the search feature HD90-015BK, they have a video with a nice looking lady describing for the harley riders. H50-109BK is the single one for $39.95 that is a bolt on, H50-110BK is a single one for $39.95 and it is a velcro one which I don't think would work on a harley very good, IMHO. The ones I got is a dual package bolt on. J & P also sell these as single's but it is for honda gold wings, eglidegoodies also sells these as a package for $90 if I remember right then you have shipping, I lucked out with a dealer here for Big Bike Parts so no shipping for me.

Hope this helps you out, I had already recycled everythig so I went thru it and found it for you, no problem though as it was on top .


All for now Trampas

[Trampas]

If anyone goes to big bike parts, hit the locator tab and type in your zip, that is what I did and I had 3 dealers for big bike parts, I chose the honda dealer since he is only 5 miles away from me, it might surprise you what you have around your locally and that is where I also got my dust cover, a nelson rigg, saved some there also on shipping, if I can save a few dollars I am going to, these bike's cost enough the way it is.


All for now Trampas

[scuba1954]

Found them, thanks. Noticed they also have removable pouches for concealed carry. I sent them an email to see if those would work on my 14 trike...thanks again for three great find.

[rodekyll]

Good info on what looks like a nice way to add storage!

[PosseRider]

Found them, thanks. Noticed they also have removable pouches for concealed carry. I sent them an email to see if those would work on my 14 trike...thanks again for three great find.

HD90-015BK - BLACK CLASSIC POCKETS - PAIR (New) says 14 & newer. 79.95

[HDB0B]

<font color="#BE0D34"><span style="font-family: Tahoma"><b>H41-152CC - EZ CARRY - For concealed carry. Great information. Thanks!</b></span></font>

[scuba1954]

H41-152CC - EZ CARRY - For concealed carry. Great information. Thanks!

I seen this part but is does not show it will fit the harley trike. Shows for gold wings. I sent them an email asking about fitment.

[HDB0B]

I seen this part but is does not show it will fit the Harley trike. Shows for gold wings. I sent them an email asking about fitment.

Seems to me that the long strap like section is what attaches to the GW bike .... and you would have to figure out where you want it. I say the strap can be cut isolating the attaching point, drilled and bolted to a lowers door. Next there is a belt clip with it. It also looks to me that the case mounts to the attach clip by inserting at 90 degrees and rotating. I am sure that I can make it work. it would look similar to a Uncle Mike's belt clip carry case (pda discrete style).

Bob

[Casper]

Thought about doing the same thing, eBay has lots also, Hoppie, Mustang makes several.
I would use industrial double lock Velcro