150 Most Recent Posts

Thread AuthorPostersPost AuthorForumThread/Post Link
Geep20208SullyNew Member Introduct...New Member
Noodles1074Old Road DogHarley Freewheeler /...Very Nice Gloves
Trampas5Old Road DogHarley Tri GlideWas at my dealer today
skisnow8062rhino 2Champion Trike2002 goldwing w champion conversion...
Voo Doo Blue5ol' schoolNew Member Introduct...New Pacific North Wet member
Voo Doo Blue5hogmemberisoldNew Member Introduct...New Pacific North Wet member
Trampas5Rogue1Harley Tri GlideWas at my dealer today
skisnow8062skisnow806Champion Trike2002 goldwing w champion conversion...
Voo Doo Blue5trike ladyNew Member Introduct...New Pacific North Wet member
Oldman-TriGlide4jmhenrieHarley Tri GlideOpen or Closed Trailer for 2028 Tri...
Voo Doo Blue5rhino 2New Member Introduct...New Pacific North Wet member
Voo Doo Blue5Voo Doo BlueNew Member Introduct...New Pacific North Wet member
Mykneesbehurtin10rhino 2Harley Tri GlideTri Glide Reverse Motor
Geep20208trike ladyNew Member Introduct...New Member
Aging Gracefully5NotgrownupHarley Freewheeler /...switching Tri-Glide for Road Glide ...
Grandpot5GrandpotHonda TrikesFront tire?
Geep20208Marc HNew Member Introduct...New Member
Mykneesbehurtin1019jmanHarley Tri GlideTri Glide Reverse Motor
Geep20208Uncle FesterNew Member Introduct...New Member
Geep20208ZammyNew Member Introduct...New Member
Geep20208rhino 2New Member Introduct...New Member
Aging Gracefully5seniorsgtHarley Freewheeler /...switching Tri-Glide for Road Glide ...
Grandpot5NotgrownupHonda TrikesFront tire?
Grandpot53W-loneriderHonda TrikesFront tire?
Geep20208woodyNew Member Introduct...New Member
Trampas5PanheadSteveHarley Tri GlideWas at my dealer today
Trampas5SeaweedHarley Tri GlideWas at my dealer today
Grandpot5cycle7447Honda TrikesFront tire?
Grandpot5tourmanHonda TrikesFront tire?
ultrafxr5TrampasHarley Tri GlideFinished at last . . . well at leas...
Trampas5TrampasHarley Tri GlideWas at my dealer today
Grandpot5GrandpotHonda TrikesFront tire?
Geep20208Geep2020New Member Introduct...New Member
Oldman-TriGlide4NotgrownupHarley Tri GlideOpen or Closed Trailer for 2028 Tri...
Oldman-TriGlide4ultrafxrHarley Tri GlideOpen or Closed Trailer for 2028 Tri...
Noodles1074BrokenBackJackHarley Freewheeler /...Very Nice Gloves
Oldman-TriGlide4Oldman-TriGlideHarley Tri GlideOpen or Closed Trailer for 2028 Tri...
RedOregon13Papa ZookHarley Tri GlideUpgrades on '24 Triglide?
Bama boy4DragonStallion TrikesStallion fuel pump
Bama boy4DragonStallion TrikesStallion fuel pump
Bama boy4DragonStallion TrikesStallion fuel pump
Papa Zook239SullyNew Member Introduct...What Made You Join TrikeTalk Forum?
RedOregon13RedOregonHarley Tri GlideUpgrades on '24 Triglide?
RedOregon13NotgrownupHarley Tri GlideUpgrades on '24 Triglide?
phillipschuckann7NotgrownupHonda TrikesWho made my trike?
Papa Zook239ol' schoolNew Member Introduct...What Made You Join TrikeTalk Forum?
PKLGW2pawsHonda Trikes2007 gl1800 motor trike
ultrafxr5Papa ZookHarley Tri GlideFinished at last . . . well at leas...
Noodles1074NotgrownupHarley Freewheeler /...Very Nice Gloves
ultrafxr5NotgrownupHarley Tri GlideFinished at last . . . well at leas...
Papa Zook239rhino 2New Member Introduct...What Made You Join TrikeTalk Forum?
PKLGW2PKLGWHonda Trikes2007 gl1800 motor trike
Papa Zook239skisnow806New Member Introduct...What Made You Join TrikeTalk Forum?
Speedy Pete12JTJerseyNew Member Introduct...New member from Alberta, Canada
Just BOB2Just BOBStallion Trikesinfo
ultrafxr5Longbeard71Harley Tri GlideFinished at last . . . well at leas...
ultrafxr5ultrafxrHarley Tri GlideFinished at last . . . well at leas...
ultrafxr5TrampasHarley Tri GlideFinished at last . . . well at leas...
ultrafxr5ultrafxrHarley Tri GlideFinished at last . . . well at leas...
Noodles1074Noodles107Harley Freewheeler /...Very Nice Gloves
Speedy Pete12cycle7447New Member Introduct...New member from Alberta, Canada
RISal24!12cycle7447New Member Introduct...New member..new to trikes
phillipschuckann7Papa ZookHonda TrikesWho made my trike?
RISal24!12ol' schoolNew Member Introduct...New member..new to trikes
Bama boy4Grey_Ghost_27Stallion TrikesStallion fuel pump
phillipschuckann7trike ladyHonda TrikesWho made my trike?
RISal24!12trike ladyNew Member Introduct...New member..new to trikes
Speedy Pete12RustyBNew Member Introduct...New member from Alberta, Canada
RISal24!12Marc HNew Member Introduct...New member..new to trikes
Bowie11RustyBNew Member Introduct...New to trike, old time rider
RISal24!12RustyBNew Member Introduct...New member..new to trikes
RISal24!12rhino 2New Member Introduct...New member..new to trikes
RISal24!12hardwickbvNew Member Introduct...New member..new to trikes
Bowie11hardwickbvNew Member Introduct...New to trike, old time rider
RISal24!12Uncle FesterNew Member Introduct...New member..new to trikes
Bowie11ZammyNew Member Introduct...New to trike, old time rider
RISal24!12SullyNew Member Introduct...New member..new to trikes
RISal24!12ZammyNew Member Introduct...New member..new to trikes
Chief80138520fdHarley Tri GlideHow many miles on your Triglide?
RISal24!12GorillaNew Member Introduct...New member..new to trikes
RISal24!12RISal24!New Member Introduct...New member..new to trikes
woody19woodyHonda Trikes2019 Goldwing CSC
DK Custom Products362NotgrownupHarley Tri GlideWhat did you do to Your Tri-Glide T...
Bouncer10NotgrownupHarley Tri GlideDrive Belt Replacement Time
Bouncer10BouncerHarley Tri GlideDrive Belt Replacement Time
Bouncer10BouncerHarley Tri GlideDrive Belt Replacement Time
phillipschuckann7GorillaHonda TrikesWho made my trike?
rjd637brianlHonda Trikes1989 Honda Goldwing trike opinions
DeathBySnuSnu19GorillaVW Powered TrikesVolkswagen Kit Cars
DK Custom Products362520fdHarley Tri GlideWhat did you do to Your Tri-Glide T...
SHARKDIVER4DK Custom ProductsGeneral Harley Chatsuper shox
phillipschuckann7trike ladyHonda TrikesWho made my trike?
phillipschuckann7ol' schoolHonda TrikesWho made my trike?
phillipschuckann7rhino 2Honda TrikesWho made my trike?
phillipschuckann7phillipschuckannHonda TrikesWho made my trike?
Bowie11Uncle FesterNew Member Introduct...New to trike, old time rider
RedOregon13RedOregonHarley Tri GlideUpgrades on '24 Triglide?
DeathBySnuSnu19DeathBySnuSnuVW Powered TrikesVolkswagen Kit Cars
Bowie11woodyNew Member Introduct...New to trike, old time rider
Just BOB2GorillaStallion Trikesinfo
SHARKDIVER4WindyOneGeneral Harley Chatsuper shox
Bouncer10GorillaHarley Tri GlideDrive Belt Replacement Time
Just BOB2Just BOBStallion Trikesinfo
Chief80138CagmoHarley Tri GlideHow many miles on your Triglide?
PopPop13consitterNew Member Introduct...New Member
TxHarleyRider2Papa ZookHarley Trike Convers...Need help bad with conversion.
PopPop13Pegasus1300New Member Introduct...New Member
Bouncer10NotgrownupHarley Tri GlideDrive Belt Replacement Time
PopPop13ol' schoolNew Member Introduct...New Member
Bowie11ol' schoolNew Member Introduct...New to trike, old time rider
Chief80138DOKKHarley Tri GlideHow many miles on your Triglide?
Bouncer10BouncerHarley Tri GlideDrive Belt Replacement Time
Bowie11trike ladyNew Member Introduct...New to trike, old time rider
Bowie11GorillaNew Member Introduct...New to trike, old time rider
Bowie11rhino 2New Member Introduct...New to trike, old time rider
Bowie11Marc HNew Member Introduct...New to trike, old time rider
SaltBushBill11Marc HNew Member Introduct...New member
Bowie11BowieNew Member Introduct...New to trike, old time rider
Rick Sinacore9RawhidekenHarley Tri GlideTour pack reinforcement
SaltBushBill11Uncle FesterNew Member Introduct...New member
Burnerboy3tommyv333Harley Trike Convers...Hey Bozo (Andrew)
Old Aviator5Old AviatorHonda TrikesGreasing a Motortrike Coupe SA rear...
Old Aviator5Old AviatorHonda TrikesGreasing a Motortrike Coupe SA rear...
Noodles1073JTJerseyHarley Freewheeler /...Tobacco Fade
Noodles1073trike ladyHarley Freewheeler /...Tobacco Fade
Old Aviator5Phu CatHonda TrikesGreasing a Motortrike Coupe SA rear...
SaltBushBill11SullyNew Member Introduct...New member
ronc44242Papa ZookHarley Tri Glidequestion
TxHarleyRider2TxHarleyRiderHarley Trike Convers...Need help bad with conversion.
Chappy KC5StrelnikovFrankensteinFrankenstein Kit
jerry1@iw.net4StrelnikovFrankensteinFrankenstein owners
TxHarleyRider2Papa ZookHarley Trike Convers...Need help bad with conversion.
Skavoola14SkavoolaNew Member Introduct...New to Trike Talk
Old Aviator5GoldWingrGregHonda TrikesGreasing a Motortrike Coupe SA rear...
El Lobo10El LoboHarley Tri GlideBeen away for a while
SaltBushBill11GorillaNew Member Introduct...New member
cissywalton2GorillaCalifornia Sidecar T...how do I change out the reverse bel...
Noodles1073Noodles107Harley Freewheeler /...Tobacco Fade
Old Aviator5Old AviatorHonda TrikesGreasing a Motortrike Coupe SA rear...
SaltBushBill11trike ladyNew Member Introduct...New member
ronc44242ronc4424Harley Tri Glidequestion
Old Aviator5SkavoolaHonda TrikesGreasing a Motortrike Coupe SA rear...
Old Aviator5rhino 2Honda TrikesGreasing a Motortrike Coupe SA rear...
Old Aviator5Old AviatorHonda TrikesGreasing a Motortrike Coupe SA rear...
cissywalton2cissywaltonCalifornia Sidecar T...how do I change out the reverse bel...
Skavoola14PosseRiderNew Member Introduct...New to Trike Talk
Skavoola14woodyNew Member Introduct...New to Trike Talk
PopPop13woodyNew Member Introduct...New Member
Speedy Pete12woodyNew Member Introduct...New member from Alberta, Canada
Vulcanology10woodyNew Member Introduct...New member
Likes Likes:  84
Thanks Thanks:  4
Page 3 of 6 FirstFirst 1 2 3 4 5 6 LastLast
Results 41 to 60 of 103

Thread: Pro Action Rear Shock Intall Today With Lots Of Pic's On 2017 Tri Glide

  1. #41
    450+ Posts Bill G's Avatar
    Join Date
    Mar 2015
    Location
    Bakersfield California USA
    Posts
    474
    Thanks
    0
    Thanked 0 Times in 0 Posts

    Default

    Quote Originally Posted by PosseRider View Post
    Finally. Thanks to all who responded to help. The pics were very helpful, but one little trick did it. Special thanks to "scuba1954". I was having probs getting lift kit aligned. One member said to do just like I installed the lift kit. Well that was over 6 months ago. Hell, I forgot last week. Anyway "scuba1954" gave me a phone call & that did the trick. Shocks are now on,but I will have to wait till tomorrow to get the wheels back on. Too sore from rollin around on the floor. That's for younger than me.. THANKS EVERYONE
    I am glad you got it all figured out.

    I had a simular issue with the left shock during my Pro Action rear shock installation. Below is what I mentioned about it in my original rite up about the installation.

    (QUOTE) #3 from my original posting below concerning shock length.

    #3 The right side shock went on easy and threaded right on to the shock mounting brackets top and bottom.

    The left shock did not. I had to put a little pressure down ward on the swingarm by placing a padded short bar or long screwdriver between the frame and bottom shock bracket and pull down a little to get the shock bolt straight so it would thread into the lower shock bracket. (I think this was because the drive belt held a little upward tension on the left side). It did not take much effort at all for the bolt to line up. (END QUOTE)

    After it's all said and done it sure feels good. Now go ride the heck out of it.

    You can now fine tune your shock click adjusters to your liking. I would adjust 1 click and ride a long ride. Then adjust (softer or harder) for me softer and try again. It took me about 4 rides to get it all dialed in perfect for our set up. I settled on 2 clicks out and also liked 3. Of course this adjustment will be diffrent for everyone.

    Our shocks came set at 5 clicks. Pro Action says most find somewhere between 3 & 6 clicks to work for them.

    Ride Safe,
    Bill G
    Last edited by Bill G; 01-22-2017 at 05:54 PM.
    Through Jesus Christ, I a sinner am saved. Not by my doing but through his doing by his sacrifice and Blood Shed on the Cross. His gift to all mankind that will only believe and accept him by Faith. Through his Death and Resurrection I am Saved by Grace and someday I will be with our Lord in Heaven forever.

  2. #42
    3750+ Posts
    Gold Club Member
    PosseRider's Avatar
    Join Date
    Jan 2016
    Location
    Dayton, Ohio
    Posts
    3,907
    Thanks
    0
    Thanked 0 Times in 0 Posts

    Default

    Quote Originally Posted by Bill G View Post
    I am glad you got it all figured out.

    I had a simular issue with the left shock during my Pro Action rear shock installation. Below is what I mentioned about it in my original rite up about the installation.

    (QUOTE) #3 from my original posting below concerning shock length.

    #3 The right side shock went on easy and threaded right on to the shock mounting brackets top and bottom.

    The left shock did not. I had to put a little pressure down ward on the swingarm by placing a padded short bar or long screwdriver between the frame and bottom shock bracket and pull down a little to get the shock bolt straight so it would thread into the lower shock bracket. (I think this was because the drive belt held a little upward tension on the left side). It did not take much effort at all for the bolt to line up. (END QUOTE)

    After it's all said and done it sure feels good. Now go ride the heck out of it.

    You can now fine tune your shock click adjusters to your liking. I would adjust 1 click and ride a long ride. Then adjust (softer or harder) for me softer and try again. It took me about 4 rides to get it all dialed in perfect for our set up. I settled on 2 clicks out and also liked 3. Of course this adjustment will be diffrent for everyone.

    Our shocks came set at 5 clicks. Pro Action says most find somewhere between 3 & 6 clicks to work for them.

    Ride Safe,
    Bill G
    I missed (forgot) that. Neither shock would line up. But, all is good now.

  3. #43
    450+ Posts Bill G's Avatar
    Join Date
    Mar 2015
    Location
    Bakersfield California USA
    Posts
    474
    Thanks
    0
    Thanked 0 Times in 0 Posts

    Default

    Quote Originally Posted by PosseRider View Post
    I missed (forgot) that. Neither shock would line up. But, all is good now.
    Glad you got it, I am curious here do you have a lift kit on your trike??

    I will bet you a dollar to a donut that if you have lift kit brackets on your trike. Your swing arm was against or resting on the exaust because of the extra lift at full extension while trying to get the shocks back on. This may have been why you struggled with both shocks at full extension during the install. The tolerances with lift brackets put the swing arm very close to the exaust mainly on the header side. On a lot of trikes the swing arm rest right on the exaust (more so on the header side) after the install or very close and most guys don't even know it. These clearances differ from trike to trike with some deviation. Some hit and some have a small amount of clearance. This area between the swing arm and the exaust was very close with the lift brackets on our 2015 trike.

    2017 model,
    The lift brackets will place the swingarm very close at full extension if not hitting on the exaust on the 2017 models.

    The swing arm will hit here.. See pic my 2017 at full extension with stock shock bracket. With lift brackets on our 2017 it hits here at full extension. I removed the lift brackets. Maybe company's like DK will come out with a lift bracket option that will work with the tighter clearances like on our trike.

    Ride Safe,
    Bill G
    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	IMG_1662.JPG 
Views:	278 
Size:	52.7 KB 
ID:	42391  

    Through Jesus Christ, I a sinner am saved. Not by my doing but through his doing by his sacrifice and Blood Shed on the Cross. His gift to all mankind that will only believe and accept him by Faith. Through his Death and Resurrection I am Saved by Grace and someday I will be with our Lord in Heaven forever.

  4. #44
    500+ Posts
    Join Date
    Apr 2016
    Location
    Vero Beach, Florida
    Posts
    541
    Thanks
    0
    Thanked 0 Times in 0 Posts

    Default

    Quote Originally Posted by Bill G View Post
    Glad you got it, I am curious here do you have a lift kit on your trike??

    I will bet you a dollar to a donut that if you have lift kit brackets on your trike. Your swing arm was against or resting on the exaust because of the extra lift at full extension while trying to get the shocks back on. This may have been why you struggled with both shocks at full extension during the install. The tolerances with lift brackets put the swing arm very close to the exaust mainly on the header side. On a lot of trikes the swing arm rest right on the exaust (more so on the header side) after the install or very close and most guys don't even know it. These clearances differ from trike to trike with some deviation. Some hit and some have a small amount of clearance. This area between the swing arm and the exaust was very close with the lift brackets on our 2015 trike.

    2017 model,
    The lift brackets will place the swingarm very close at full extension if not hitting on the exaust on the 2017 models.

    The swing arm will hit here.. See pic my 2017 at full extension with stock shock bracket. With lift brackets on our 2017 it hits here at full extension. I removed the lift brackets. Maybe company's like DK will come out with a lift bracket option that will work with the tighter clearances like on our trike.

    Ride Safe,
    Bill G
    Bill, I would get your dollar and be able to eat my donut on the DK Customs custom lift kit for my 2017 TGU. Yes, at full extension of the swing arm unsupported by the shocks, the clearance on my trike with the right-side Z-pipe is only about 1/4". However, my swingarm cannot travel any further and neither can the Z-pipe so 1/4" is like a mile. Some of the Z-pipes seem to have larger welds and may be a bit out of spec as it appears on your 2017? On my 2016 TGU, the custom lift kit clearance was adequate and so is that on my 2017. What you may have experienced may be more of a one-off situation depending on the factors I mentioned about the welds on the Z-pipe and/or the bend that they put on a particular part. There is the ability to adjust the connection between the Z-pipe and the header/rear muffler so I suspect clearance issues can be fairly readily accommodated. I personally would not ride without my DK Customs Custom Lift Kit for the following reasons: 1. The pipe clearance when I unload the trike from my Drop-Tail trailer is inadequate without the lift kit 2. The trike rides smoother with the lift kit due to the change in shock angles 3. The steering is much lighter with the slight change in rake of the front end 4. I don't have to worry about bottoming out riding two-up over larger potholes 5. Braking seems to be a tad better with the front tire due to the slight weight distribution toward the front tire 6. I think it really looks MUCH better than that "drag-butt" look.

  5. #45
    450+ Posts Bill G's Avatar
    Join Date
    Mar 2015
    Location
    Bakersfield California USA
    Posts
    474
    Thanks
    0
    Thanked 0 Times in 0 Posts

    Default

    Quote Originally Posted by Capt.Bob View Post
    Bill, I would get your dollar and be able to eat my donut on the DK Customs custom lift kit for my 2017 TGU. Yes, at full extension of the swing arm unsupported by the shocks, the clearance on my trike with the right-side Z-pipe is only about 1/4". However, my swingarm cannot travel any further and neither can the Z-pipe so 1/4" is like a mile. Some of the Z-pipes seem to have larger welds and may be a bit out of spec as it appears on your 2017? On my 2016 TGU, the custom lift kit clearance was adequate and so is that on my 2017. What you may have experienced may be more of a one-off situation depending on the factors I mentioned about the welds on the Z-pipe and/or the bend that they put on a particular part. There is the ability to adjust the connection between the Z-pipe and the header/rear muffler so I suspect clearance issues can be fairly readily accommodated. I personally would not ride without my DK Customs Custom Lift Kit for the following reasons: 1. The pipe clearance when I unload the trike from my Drop-Tail trailer is inadequate without the lift kit 2. The trike rides smoother with the lift kit due to the change in shock angles 3. The steering is much lighter with the slight change in rake of the front end 4. I don't have to worry about bottoming out riding two-up over larger potholes 5. Braking seems to be a tad better with the front tire due to the slight weight distribution toward the front tire 6. I think it really looks MUCH better than that "drag-butt" look.

    Bob you can have the dollar..Lol. I have adjusted the Z pipe every wich way, loosened the exaust system and maid sure it was at the furthest down position. Still a no go.. I still think this issue is more common than what is known.

    Have talked with you before about this I asked you how yours fit on a pm. I am glad your 2017 worked out.

    Ride Safe,
    Bill G
    Through Jesus Christ, I a sinner am saved. Not by my doing but through his doing by his sacrifice and Blood Shed on the Cross. His gift to all mankind that will only believe and accept him by Faith. Through his Death and Resurrection I am Saved by Grace and someday I will be with our Lord in Heaven forever.

  6. DKCustoms postbit
  7. #46
    500+ Posts
    Join Date
    Apr 2016
    Location
    Vero Beach, Florida
    Posts
    541
    Thanks
    0
    Thanked 0 Times in 0 Posts

    Default

    Quote Originally Posted by Bill G View Post
    Bob you can have the dollar..Lol. I have adjusted the Z pipe every wich way, loosened the exaust system and maid sure it was at the furthest down position. Still a no go.. I still think this issue is more common than what is known.

    Have talked with you before about this I asked you how yours fit on a pm. I am glad your 2017 worked out.

    Ride Safe,
    Bill G
    Bill you seem like a nice guy so I don't want to take your dollar. I took a picture of the weld on my right Z-pipe and it appears to be considerably smaller in diameter than the weld they put on your pipe which I suspect added to the clearance issues. Had you thought about just gently grinding the contact area flat on the large bead or even slightly reshaping the Z-pipe with a hammer ? That may have given you sufficient clearance? I know that these are work arounds but it appears that the MoCo's QC and uniformity from sample to sample may have looser tolerances than we would like? BobClick image for larger version. 

Name:	z pipe weld.jpg 
Views:	373 
Size:	282.7 KB 
ID:	42413
    Last edited by Capt.Bob; 01-24-2017 at 11:31 AM.

  8. #47
    10+ Posts
    Join Date
    Aug 2015
    Location
    Pella
    Posts
    13
    Thanks
    0
    Thanked 0 Times in 0 Posts

    Default Shock Istall

    Quote Originally Posted by Bill G View Post
    Bob you can have the dollar..Lol. I have adjusted the Z pipe every wich way, loosened the exaust system and maid sure it was at the furthest down position. Still a no go.. I still think this issue is more common than what is known.

    Have talked with you before about this I asked you how yours fit on a pm. I am glad your 2017 worked out.

    Ride Safe,
    Bill G
    Bill, you are right I have installed several sets of replacement shocks on Tri Glides and Freewheelers and some of them the left shock is next to impossible to install. There is a difference in the eye to eye length from right to left side. In my opinion many are this way, if you look at the rear of trikes sitting on showroom floors I think you will see that on some the left side is lower than the right.
    I believe there is a problem with the rear frame. I had my dealer try to adjust the rear frame it was not totally successful. In my opinion this has a negative impact on ride I feel it could bind the suspension.
    I had a 2015 Freewheeler it was not an issue on it, however on my 2017 it is. It would be great if a factory rep with lots of knowledge could be contacted reference this problem.

    Gene

  9. #48
    450+ Posts Bill G's Avatar
    Join Date
    Mar 2015
    Location
    Bakersfield California USA
    Posts
    474
    Thanks
    0
    Thanked 0 Times in 0 Posts

    Default

    Quote Originally Posted by Capt.Bob View Post
    Bill you seem like a nice guy so I don't want to take your dollar. I took a picture of the weld on my right Z-pipe and it appears to be considerably smaller in diameter than the weld they put on your pipe which I suspect added to the clearance issues. Had you thought about just gently grinding the contact area flat on the large bead or even slightly reshaping the Z-pipe with a hammer ? That may have given you sufficient clearance? I know that these are work arounds but it appears that the MoCo's QC and uniformity from sample to sample may have looser tolerances than we would like? BobClick image for larger version. 

Name:	z pipe weld.jpg 
Views:	373 
Size:	282.7 KB 
ID:	42413

    Thanks for the pic Bob,

    Yes,

    I have lightly ground the weld down and smoothed it out on the top 1/2. I did this last time I had the muffler off just because the clearance bothered me. The only problem is I no longer have the Comfort lift brackets handy to try them out to see if the clearance is now enough.

    Bob
    Is that pic you posted was your axle hanging freely? shocks at full extension?. Or is it with the trike resting on the ground sitting on the tires?


    Pic's of the weld ground down Below,

    In these pic's our trike is sitting on the ground with the weight of the trike on the suspension and the shocks. The black is just a super high temp paint sprayed on the top area to seal the grinding marks or polishing left from grinding the weld down.

    Thanks,
    Bill G
    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	IMG_1723.JPG 
Views:	240 
Size:	58.8 KB 
ID:	42426  

    Click image for larger version. 

Name:	IMG_1724.JPG 
Views:	236 
Size:	47.9 KB 
ID:	42427  

    Last edited by Bill G; 01-24-2017 at 04:02 PM.
    Through Jesus Christ, I a sinner am saved. Not by my doing but through his doing by his sacrifice and Blood Shed on the Cross. His gift to all mankind that will only believe and accept him by Faith. Through his Death and Resurrection I am Saved by Grace and someday I will be with our Lord in Heaven forever.

  10. #49
    450+ Posts Bill G's Avatar
    Join Date
    Mar 2015
    Location
    Bakersfield California USA
    Posts
    474
    Thanks
    0
    Thanked 0 Times in 0 Posts

    Default

    Quote Originally Posted by HDMAN View Post
    Bill, you are right I have installed several sets of replacement shocks on Tri Glides and Freewheelers and some of them the left shock is next to impossible to install. There is a difference in the eye to eye length from right to left side. In my opinion many are this way, if you look at the rear of trikes sitting on showroom floors I think you will see that on some the left side is lower than the right. I believe there is a problem with the rear frame. I had my dealer try to adjust the rear frame it was not totally successful. In my opinion this has a negative impact on ride I feel it could bind the suspension.I had a 2015 Freewheeler it was not an issue on it, however on my 2017 it is. It would be great if a factory rep with lots of knowledge could be contacted reference this problem.Gene
    Gene,


    Every trike I have seen when measured leans to the left a little 1/8" to 1/4" some 1/2" I wish Harley would do better on stuff like this it is disappointing for sure. Measure your car from fender to fender on flat ground you will be surprised what is allowed.

    There may be something to what your saying for sure. In my case I think it was the upward drive belt tension on the left side. The shock only needed a tiny bit of downward motion to get the bolt to line up and thread in straight.

    When they adjusted your trike they may not have got things aligned correctly. Something like for example your Panhard rod (the round rod that goes from your axle to the frame and adjust things left or right) or something else could be out of adjustment. Rear alignment has to be correct or in spec or there will be negative results on these trikes.

    Ride Safe,
    Bill G
    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	IMG_1725.JPG 
Views:	251 
Size:	106.4 KB 
ID:	42429  

    Through Jesus Christ, I a sinner am saved. Not by my doing but through his doing by his sacrifice and Blood Shed on the Cross. His gift to all mankind that will only believe and accept him by Faith. Through his Death and Resurrection I am Saved by Grace and someday I will be with our Lord in Heaven forever.

  11. #50
    100+ Posts 470004's Avatar
    Join Date
    Sep 2013
    Location
    Astoria, New York, USA
    Posts
    148
    Thanks
    0
    Thanked 0 Times in 0 Posts

    Default

    Thanks for the photos!

  12. #51
    450+ Posts Bill G's Avatar
    Join Date
    Mar 2015
    Location
    Bakersfield California USA
    Posts
    474
    Thanks
    0
    Thanked 0 Times in 0 Posts

    Default

    Quote Originally Posted by Capt.Bob View Post
    Bill you seem like a nice guy so I don't want to take your dollar. I took a picture of the weld on my right Z-pipe and it appears to be considerably smaller in diameter than the weld they put on your pipe which I suspect added to the clearance issues. Had you thought about just gently grinding the contact area flat on the large bead or even slightly reshaping the Z-pipe with a hammer ? That may have given you sufficient clearance? I know that these are work arounds but it appears that the MoCo's QC and uniformity from sample to sample may have looser tolerances than we would like? BobClick image for larger version. 

Name:	z pipe weld.jpg 
Views:	373 
Size:	282.7 KB 
ID:	42413
    Bob,

    Not to question what you said I know you said your trikes suspension was off the ground.

    But when I looked at your pic again and zoomed it in close. In the corner of the pic it looks like your trikes tire are sitting on the ground or the concrete. I may be wrong about what I am seeing.

    With the Comfort Lift on our 2017 Tri Glide the swing arm looked to clear just a hair siting on the ground like yours. But then when lifted at full swing arm extension tires off the ground with the shocks at full extension the swing arm then hit.

    I just want to make sure things are apples to apples here on what we are comparing or looking at.

    I also agree 100% with you and your reasons stated on the benefits of the DK Comfort Lift when installed on a trike.

    Ride Safe Friend,
    Bill G
    Through Jesus Christ, I a sinner am saved. Not by my doing but through his doing by his sacrifice and Blood Shed on the Cross. His gift to all mankind that will only believe and accept him by Faith. Through his Death and Resurrection I am Saved by Grace and someday I will be with our Lord in Heaven forever.

  13. #52
    500+ Posts
    Join Date
    Apr 2016
    Location
    Vero Beach, Florida
    Posts
    541
    Thanks
    0
    Thanked 0 Times in 0 Posts

    Default

    Bill G. My picture was of the trike on the ground this morning with the stock shocks and the Custom Lift Kit installed. I am using about 17 pounds of air in my stock shocks when I ride solo.
    Last edited by Capt.Bob; 01-24-2017 at 08:10 PM.

  14. #53
    450+ Posts Bill G's Avatar
    Join Date
    Mar 2015
    Location
    Bakersfield California USA
    Posts
    474
    Thanks
    0
    Thanked 0 Times in 0 Posts

    Default

    Quote Originally Posted by Capt.Bob View Post
    Bill G. My picture was of the trike on the ground this morning with the stock shocks and the Custom Lift Kit installed. I am using about 17 pounds of air in my stock shocks when I ride solo.
    Thanks Bob,

    Bare with me here,

    If you lift your trike on jack stands like in the pic below with the axle hanging free and un-supported your axle will be at its lowest point without any sag. With the clearance shown in your pic I bet your swing arm will hit the Z pipe when the swing arm moves towards its outward range of operation ( right now your trike has weight on it taking up the sag). Let me explain my concern now would be when you go down the road and hit a dip or a bigger bump and your suspension compresses then unloads upward I would think your swing arm could hit the Z pipe or exhaust during its range of travel in theory.

    It seems like this is not really a big issue or there would be a ton of complaints out there about this. I am going to get and install another set of lift brackets on our 2017. If I end up this time having the clearance on the ground with our trike like you do I am going to call it good.

    Take Care,
    Bill G



    Ride Safe,
    Bill G
    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	IMG_4445.JPG 
Views:	298 
Size:	116.2 KB 
ID:	42437  

    Last edited by Bill G; 01-25-2017 at 02:39 AM.
    Through Jesus Christ, I a sinner am saved. Not by my doing but through his doing by his sacrifice and Blood Shed on the Cross. His gift to all mankind that will only believe and accept him by Faith. Through his Death and Resurrection I am Saved by Grace and someday I will be with our Lord in Heaven forever.

  15. #54
    500+ Posts
    Join Date
    Apr 2016
    Location
    Vero Beach, Florida
    Posts
    541
    Thanks
    0
    Thanked 0 Times in 0 Posts

    Default

    Quote Originally Posted by Bill G View Post
    Thanks Bob,

    Bare with me here,

    If you lift your trike on jack stands like in the pic below with the axle hanging free and un-supported your axle will be at its lowest point without any sag. With the clearance shown in your pic I bet your swing arm will hit the Z pipe when the swing arm moves towards its outward range of operation ( right now your trike has weight on it taking up the sag). Let me explain my concern now would be when you go down the road and hit a dip or a bigger bump and your suspension compresses then unloads upward I would think your swing arm could hit the Z pipe or exhaust during its range of travel in theory.

    It seems like this is not really a big issue or there would be a ton of complaints out there about this. I am going to get and install another set of lift brackets on our 2017. If I end up this time having the clearance on the ground with our trike like you do I am going to call it good.

    Take Care,
    Bill G



    Ride Safe,
    Bill G
    Bill, I just jacked up my 2017 TGU and did note that the weld on the Z-pipe is just barely touching the front edge of the swingarm in the unsupported position with the wheels entirely off the ground. I see where your concern is. However, a scenario where the trike would hit a pothole and completely unload to the point of full extension of the swingarm seems highlyClick image for larger version. 

Name:	z touch.jpg 
Views:	362 
Size:	273.3 KB 
ID:	42442 unlikely. I would think that other hard parts would not be liking that scenario more than the lowly z-pipe

  16. #55
    450+ Posts Bill G's Avatar
    Join Date
    Mar 2015
    Location
    Bakersfield California USA
    Posts
    474
    Thanks
    0
    Thanked 0 Times in 0 Posts

    Default

    Quote Originally Posted by Capt.Bob View Post
    Bill, I just jacked up my 2017 TGU and did note that the weld on the Z-pipe is just barely touching the front edge of the swingarm in the unsupported position with the wheels entirely off the ground. I see where your concern is. However, a scenario where the trike would hit a pothole and completely unload to the point of full extension of the swingarm seems highlyClick image for larger version. 

Name:	z touch.jpg 
Views:	362 
Size:	273.3 KB 
ID:	42442 unlikely. I wouuld think that other hard parts would not be liking that scenario more than the lowly z-pipe

    Thanks again Bob for your input and the pic's. With a lot more thought on this I agree. I ordered another set of Comfort Lift brackets last night. I will send you a pic after the install. I am hoping for results like yours.

    I will for sure split that dollar with you now....Lol my friend, over a cup of coffee.

    Take Care Friend,
    Bill G
    Through Jesus Christ, I a sinner am saved. Not by my doing but through his doing by his sacrifice and Blood Shed on the Cross. His gift to all mankind that will only believe and accept him by Faith. Through his Death and Resurrection I am Saved by Grace and someday I will be with our Lord in Heaven forever.

  17. DKCustoms postbit
  18. #56
    450+ Posts Bill G's Avatar
    Join Date
    Mar 2015
    Location
    Bakersfield California USA
    Posts
    474
    Thanks
    0
    Thanked 0 Times in 0 Posts

    Default

    Quote Originally Posted by Bill G View Post
    Thanks again Bob for your input and the pic's. With a lot more thought on this I agree. I ordered another set of Comfort Lift brackets last night. I will send you a pic after the install. I am hoping for results like yours.

    I will for sure split that dollar with you now....Lol my friend, over a cup of coffee.

    Take Care Friend,
    Bill G

    I said above I would post a pic after the install.

    Clearance at Z pipe after Comfort Lift install on our 2017 Tri Glide. Trike sitting on the tires on the ground.

    Z pipe clearance pic after lift / pic before lift. Both pic's tires on the ground.

    Ride Safe All,
    Bill G
    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	IMG_1733.JPG 
Views:	228 
Size:	63.2 KB 
ID:	42470  

    Click image for larger version. 

Name:	IMG_1723.JPG 
Views:	238 
Size:	58.8 KB 
ID:	42472  

    Last edited by Bill G; 01-27-2017 at 08:18 PM.
    Through Jesus Christ, I a sinner am saved. Not by my doing but through his doing by his sacrifice and Blood Shed on the Cross. His gift to all mankind that will only believe and accept him by Faith. Through his Death and Resurrection I am Saved by Grace and someday I will be with our Lord in Heaven forever.

  19. #57
    500+ Posts
    Join Date
    Apr 2016
    Location
    Vero Beach, Florida
    Posts
    541
    Thanks
    0
    Thanked 0 Times in 0 Posts

    Default

    Quote Originally Posted by Bill G View Post
    I said above I would post a pic after the install.

    Clearance at Z pipe after Comfort Lift install on our 2017 Tri Glide. Trike sitting on the tires on the ground.

    Z pipe clearance pic after lift / pic before lift. Both pic's tires on the ground.

    Ride Safe All,
    Bill G
    Bill, The pictures you put up are not particularly clear. How is the clearance now?

  20. #58
    450+ Posts Bill G's Avatar
    Join Date
    Mar 2015
    Location
    Bakersfield California USA
    Posts
    474
    Thanks
    0
    Thanked 0 Times in 0 Posts

    Default

    Quote Originally Posted by Capt.Bob View Post
    Bill, The pictures you put up are not particularly clear. How is the clearance now?
    Bob,

    The clearance now is about the same as yours give or take. Just shy of a 1/4" .

    Bob I know it's hard to see the gap. The reason is because of the high temp black paint that was applied over the thick weld that was buffed or ground down a little. This makes it hard to get enough light in the pic to see the gap.

    The clearance is shy of about 1/4" with the tires on the ground now. About the same as the pic below with the swing arm at full extension with the stock HD shock brackets before the weld was ground down.

    * 1st Pic below stock shock brackets full ext of the swing arm tires off ground before the weld was ground down. About or just shy of 1/4".

    * 2nd pic tires on the ground Comfort Lift installed weld ground down with black high temp paint applied. As said just shy of 1/4" clearance. A little less gap than the first pic but enough. Like you said a 1/4" is a mile..Lol

    Ride Safe,
    Bill G
    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	IMG_1662.JPG 
Views:	215 
Size:	52.7 KB 
ID:	42487  

    Click image for larger version. 

Name:	IMG_1733.JPG 
Views:	222 
Size:	63.2 KB 
ID:	42489  

    Through Jesus Christ, I a sinner am saved. Not by my doing but through his doing by his sacrifice and Blood Shed on the Cross. His gift to all mankind that will only believe and accept him by Faith. Through his Death and Resurrection I am Saved by Grace and someday I will be with our Lord in Heaven forever.

  21. #59
    Sponsor
    TrikeTalk Sponsor
    DK Custom Products's Avatar
    Join Date
    Jun 2013
    Location
    Red Banks, MS
    Posts
    9,122
    Thanks
    1
    Thanked 1 Time in 1 Post

    Default

    More Details on the Limited Lifetime Warranty on the Pro-Action Shocks-
    It is a Lifetime Warranty subject to the following Limitations:

    Only for the original purchaser of the shocks
    Does not cover accidents, fire, environmental catastrophes (submerged in a flood, etc.)
    Does not cover if the shocks were abused (overloading them), improper installation or application (mounted upside down, running a Sportster shock on a Road King, etc)

    If they are installed properly, not overloaded, not damaged by some external force, then they are Lifetime shocks for the original purchaser....if they wear out, they will be rebuilt/replaced at no charge.


    Kevin
    Last edited by DK Custom Products; 02-06-2017 at 01:09 PM. Reason: GQ has BF
    www.DKCustom.com
    Call: 662-252-8828 Text: 662-420-4891
    Email: Support@DKCustomProducts.com


  22. #60
    gerald martin
    Guest

    Default cutting off threads on a bolt

    There was a mention of some one cutting off the threads on the shock bolts to make clearance to get the bolts out. I don't know about the USA but in Canada there is a safety law that at least three threads must extend out of any nut. I worked in the oil patch for ten years putting pipe lines together. If the inspector saw there were less than three threads showing you were gone no ifs ans or buts. I guess it has something to do with the stretching and shrinking of bolts and nuts from temp changes

Page 3 of 6 FirstFirst 1 2 3 4 5 6 LastLast

Similar Threads

  1. Replies: 15
    Last Post: 04-02-2017, 12:31 PM
  2. 100 Mile lunch ride today on our 2017 Tri Glide
    By Bill G in forum Harley Tri Glide
    Replies: 12
    Last Post: 12-20-2016, 02:21 PM
  3. Non-Adjustable rear shock tri-glide
    By rick1201 in forum Harley Tri Glide
    Replies: 0
    Last Post: 02-20-2016, 09:09 AM
  4. Tr-Glide rear shock options with shock lift mount.
    By rick1201 in forum Harley Tri Glide
    Replies: 8
    Last Post: 02-12-2016, 01:50 AM
  5. Tri-Glide rear shock psi
    By motorman7 in forum Harley Tri Glide
    Replies: 4
    Last Post: 09-01-2009, 09:54 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •