Not sure why all my pics got turned on their side
Had issue uploading another pic also
I've rotated them as requested.
bob.....what are your plans for the humped up crossmember that is above your new rear trans.mount??? .....realize it was/is needed to keep frame in alignment. body mnt. seat mounting or what.....just curious.
fabricated the cross member yesterday
for now it has 1 bolt on each side
later it will have 2 on each side
need to weld some gussets on the underside on the bracket that is actually welded to the frame
View attachment 44554
View attachment 44555
you are moving right along, more than i can say for my projects...no idea if its been mentioned or not...but it looks like your pinion may be up a tad... should be within a couple degrees of the trans..if not it will vibrate...i think you can buy wedges to help or cut n re-weld the saddles....
this a great explanation
Not for a Double Cardan/CV shaft.
The Pinion angle is different when setting them up
View attachment 44585
ah i figured you probably had if covered.. but thought i would mention it
yes,:xzqxz: rake and trail do not look good! lol!! however necessity is the mother of invention!