fog light lens

[bcop31]

Well, the trip down to Arizona and back was a quick one and I thought I had arrived back home in one piece ,but I was wrong. Somewhere, I believe it was on the extremely torn up section of Route 66 near Barstow, Ca., I had a rock shatter one of my fog light lens. I could not find just a lens to replace it, so I had to purchase a new light assembly. I run the Honda brand fog lights so I was able to get a replacement from Wingstuff for $45.00. Now waiting for the rain to slow down so I can wash the road grime from the bike.

[GoldWingrGreg]

I run the Honda brand fog lights so I was able to get a replacement from Wingstuff for $45.00.

FYI ... for their fog lamps, Honda also makes a lens protector kit that permanently mounts to the lower cowl. Here is the part number: 08V31-MCA-100B

[bcop31]

FYI ... for their fog lamps, Honda also makes a lens protector kit that permanently mounts to the lower cowl. Here is the part number: 08V31-MCA-100B

Thanks for the Info! I will definitely look into the lens protectors.

[Doctorbob12]

I had the Honda fog light covers on My 06 Wing. They did protect the lights well. The only complaint I had about them was dirt got behind the lens and I would have to remove them to clean the lens. They only screw though the thin plastic on the crowel and after a few yeas the screws stripped. I was able to go with a little bigger screw for a while but they were also starting to strip.

[bcop31]

Has anyone tried the Electrical Connection brand lens protectors for the lower cowl fog lights? I see Honda has a set available as does ShowChrome but the Electrical Connection brand looks like it might work as well as the more expensive design.