screw in knee

Fowler

900+ Posts
Sep 15, 2014
917
1,001
Moneta VA
So I was pulling the shiftier bezel out of the Donor vehicle for I could get the body removed and knelled down on to a screw. Had to pull it out with a needle nose pliers

Luckily I had a tetanus shot not to long ago when I ground half way thorough one of my fingers.
 
So I was pulling the shiftier bezel out of the Donor vehicle for I could get the body removed and knelled down on to a screw. Had to pull it out with a needle nose pliers

Luckily I had a tetanus shot not to long ago when I ground half way thorough one of my fingers.

Screwed yourself' Did you!... Hey that happen's sometimes when your working with tools, Go's with the turf..I can't tell you how many times i ran an engraving tool right down into the bone...It only hurts after you stop bleeding...:laugh:
 
So I was pulling the shiftier bezel out of the Donor vehicle for I could get the body removed and knelled down on to a screw. Had to pull it out with a needle nose pliers

Luckily I had a tetanus shot not to long ago when I ground half way thorough one of my fingers.

:AGGHH: :Crap:
 
Home Remodeling, what a pain !

Years ago, when I could climb a ladder, I was helping my wife's uncle put vinyl siding on his old old house. I was working on the second floor about 10 feet up from the ground. I was wrapping it with tyvek and using a swing stapler to secure the wrap to the old clapboard. I was a little slow at moving my hand and stapled one finger to the house. YIKES !! They had to find another ladder and bring me a set of pliers to pull the staple out of the house then out of my finger. I usually steer clear of any home improvement.
staple ouch.jpg
 
​I can't image how bad that must have hurt pulling it out! I sure wouldn't have had the presence of mind to take a picture of it.

PC
 
Years ago, when I could climb a ladder, I was helping my wife's uncle put vinyl siding on his old old house. I was working on the second floor about 10 feet up from the ground. I was wrapping it with tyvek and using a swing stapler to secure the wrap to the old clapboard. I was a little slow at moving my hand and stapled one finger to the house. YIKES !! They had to find another ladder and bring me a set of pliers to pull the staple out of the house then out of my finger. I usually steer clear of any home improvement.

Gave me the shivers. :p
 
So my knee was sore for a couple days after I removed the screw.
It felt like it was going to lock up but I had to work anyway so I guess I just worked the pain out because it does not hurt to bad now.

Yep Screwed myself

No screwing to the left just yanked it it out, bled like crazy. Got blood all over the kitchen floor

Did not think about taking a picture. I was more worried about cleaning the kitchen floor before the Ol'Lady seen it (the dogs helped clean)
 

Welcome to the Trike Talk Community

Join our vibrant online community dedicated to all things Trikes! Whether you're a seasoned rider or just starting out, this is the place to share experiences, tips, and stories about your three-wheeled adventures. Explore modifications, maintenance advice, and rides, all while connecting with fellow trike enthusiasts from around the globe

Forum statistics

Threads
55,515
Messages
838,597
Members
22,620
Latest member
JamesFW

Trike Talk Community

Welcome to a community dedicated to the most diverse and fastest growing powersports segment, Motorcycle Trikes. Come join the discussion about the best makes and models, popular modifications and proven performance hacks, trike touring and travel, maintenance, meetups and more!

Register Already a member? Login

Forum statistics

Threads
55,515
Messages
838,597
Members
22,620
Latest member
JamesFW
 photo 260e2760-d89e-45b2-8675-2bc26fb3d465.jpg

 photo Trike-Talk-150-x-200.gif

 photo DK Trike Talk Right side banner 19.jpg

Merziere Reverser

 photo 9796095c-0d4b-4a9b-88ed-efe4c498d084.png
 photo f9866e4e-75c5-471a-86f5-5e72a446ecc3.png
Back
Top