2009 stallion

[danny gallaher]

i hit a manhole really hard and the front light assembly broke off the hood. looks like i need a new hood and light assembly. is there anything i can do to fix it

[Dragon]

Good luck
this same thing happened to Terry at the trike rally in deadwood. it looked like the screws holding the mount in place were tightened too tight and finally just broke off. I did not hear what he had to do to get it fixed. maybe fiberglass it permanent.

Dragon

[Las Vegas Biker]

Hi,
As Dragon said, Ive had the same thing happen to me, Twice. Both times I ended up with getting a replacement housing from Texas. Takes awhile to get it but that's the way it goes. Tried several shops to get it fixed but no luck. Both times were the result of very bad potholes, once in Alaska and the last time in south Dakota. Good luck with yours. Terry

[c3racer]

I repaired mine with epoxy then build around the post to reinforce. I had to remove the hood which is easy. With hood open remove the mirrors then unplug the head light, remove the Phillip's head screws that attaches the skin except the ones at the very front, close the hood then remove the screws at the very front, then the hood slides off. I hope this helps. #697

[danny gallaher]

can i still get a replacement houseing in texas. how about a headlight assembly

[Philip R]

can i still get a replacement houseing in texas. how about a headlight assembly

You could contact Motor Trike HQ in Troup, Texas. They have a website for contact info.

[danny gallaher]

i live in titusville florida. does anyone know where i can get my stallion worked on. i found the parts for it and need some one to put them on.

[tomg]

i live in titusville florida. does anyone know where i can get my stallion worked on. i found the parts for it and need some one to put them on.

I live in Titusville, send me a PM with your phone number and maybe I can help you.

Tomg

[danny gallaher]

thank you TOMG. dont know what a pm is but here is my # 402-617-9025

[trikervet]

thank you TOMG. dont know what a pm is but here is my # 402-617-9025

In the world of the internet a PM is a "Private Message".

[Ed Hobgood]

I live in Titusville, send me a PM with your phone number and maybe I can help you.

Tomg

Way to step up Tomg, it's people like you that makes this site what it is.

[Gorilla]

Tom his "09" maybe a fiberglass body. Still I think the best ave of attach is to remove the hood makes things easier to work on. Then I would guess epoxy or fiber glass the new assembly in place. Call me if you think I can help.

[tomg]

Tom his "09" maybe a fiberglass body. Still I think the best ave of attach is to remove the hood makes things easier to work on. Then I would guess epoxy or fiber glass the new assembly in place. Call me if you think I can help.

Thanks Ted, I spoke with Danny yesterday and I will be getting together with him to see what he has. He said a new painted hood has been ordered along with the headlight assembly.

Tom

[Gorilla]

Copy that Tom

[danny gallaher]

Does anyone know where i can get a sony controller for the dash in my stallion

[trikeman]

Might try eBay or amazon or Sony. Search for item using model # and /or serial #.

[Gorilla]

Does anyone know where i can get a sony controller for the dash in my stallion

Danny I did a quick look yesterday but could not find the one I removed. I will look again today and let you know.

[trikervet]

Does anyone know where i can get a sony controller for the dash in my stallion

Here is a link to replace the whole dash unit. I think it does away with the unit in the trunk.

https://www.ebay.com/itm/PLMR91US-Si...item23548aa5df

[Gorilla]

still can not locate my part

i also used one like above in my wifes stallion