150 Most Recent Posts

Thread AuthorPostersPost AuthorForumThread/Post Link
ctdair8ctdairHarley Tri GlideHot Rotors After New Pads
14TG2TrampasHarley Tri GlideInstallation of a new Fuel Filter &...
520fd3Rogue1For Sale & WTB C...FS: Trike Mid-Step
520fd3520fdFor Sale & WTB C...FS: Trike Mid-Step
14TG214TGHarley Tri GlideInstallation of a new Fuel Filter &...
JTJersey5JTJerseyHarley Freewheeler /...Removing Trim Around Oil Cooler
Jack Klarich1Jack KlarichGeneral Harley ChatExhaust Heat Shield
BigN693Jack KlarichEnabled TrikersFull length floorboards
JTJersey5Noodles107Harley Freewheeler /...Removing Trim Around Oil Cooler
ctdair8Old Road DogHarley Tri GlideHot Rotors After New Pads
ctdair8Old Road DogHarley Tri GlideHot Rotors After New Pads
Phu Cat4Phu CatGeneral DiscussionIs there a TV commercial
TXFIRE765GoldWingrGregHonda TrikesNew to Trikes and needing a convers...
paid4c431GoldWingrGregHonda TrikesDifference in touring between two w...
Donnimac4GoldWingrGregHonda TrikesLehman Monarch II
paid4c410GoldWingrGregHonda TrikesService for differential on a Motor...
DrCrazyTrain2powerhaulicHarley Freewheeler /...True Dual Header
520fd3NotgrownupFor Sale & WTB C...FS: Trike Mid-Step
Yannick25vwbug72501VW Powered TrikesWil-Mac trike kit
520fd3520fdFor Sale & WTB C...FS: Trike Mid-Step
Bear22012Jack KlarichNew Member Introduct...New member
Phu Cat4rhino 2General DiscussionIs there a TV commercial
14TG614TGHarley Tri GlideInstalled Genuine HD Armrest kit
scaldedchevy3Papa ZookLehman Trike2004 Gold Wing Lehman Monarch 2 Sho...
hogmemberisold2cScjhbGeneral DiscussionHow many carry spare headlight bulb...
Phu Cat4cScjhbGeneral DiscussionIs there a TV commercial
DrCrazyTrain2DrCrazyTrainHarley Freewheeler /...True Dual Header
scaldedchevy3scaldedchevyLehman Trike2004 Gold Wing Lehman Monarch 2 Sho...
scaldedchevy3scaldedchevyLehman Trike2004 Gold Wing Lehman Monarch 2 Sho...
New Orleans Kevin6MykneesbehurtinHarley Tri Glide2021 114 Triglide Stage 2 Feuling 4...
DK Custom Products362Jack KlarichHarley Tri GlideWhat did you do to Your Tri-Glide T...
ctdair8MykneesbehurtinHarley Tri GlideHot Rotors After New Pads
ctdair8ctdairHarley Tri GlideHot Rotors After New Pads
Seaweed6Jack KlarichHarley Tri GlideLower Fairing Vents
14TG6Jack KlarichHarley Tri GlideInstalled Genuine HD Armrest kit
ctdair8Jack KlarichHarley Tri GlideHot Rotors After New Pads
Phu Cat4trike ladyGeneral DiscussionIs there a TV commercial
ctdair8ctdairHarley Tri GlideHot Rotors After New Pads
scaldedchevy3Papa ZookLehman Trike2004 Gold Wing Lehman Monarch 2 Sho...
AriNV6Papa ZookRider Safety Discuss...Maybe silly but serious question, s...
Phu Cat4Phu CatGeneral DiscussionIs there a TV commercial
TwoBye1TwoByeFor Sale & WTB C...GL1500 Tall windshield
scaldedchevy3MickLehman Trike2004 Gold Wing Lehman Monarch 2 Sho...
Gernerwa11SullyNew Member Introduct...New Member from Bellingham, WA
AriNV6AriNVRider Safety Discuss...Maybe silly but serious question, s...
Jack Klarich2Jack KlarichGeneral DiscussionGreat Day for a ride today
Gernerwa11Jack KlarichNew Member Introduct...New Member from Bellingham, WA
Gernerwa11Jack KlarichNew Member Introduct...New Member from Bellingham, WA
Jarhead17753Jack KlarichHarley Freewheeler /...paint job
hogmemberisold2hogmemberisoldGeneral DiscussionHow many carry spare headlight bulb...
14TG614TGHarley Tri GlideInstalled Genuine HD Armrest kit
14TG6Papa ZookHarley Tri GlideInstalled Genuine HD Armrest kit
AriNV6Papa ZookRider Safety Discuss...Maybe silly but serious question, s...
AriNV6AriNVRider Safety Discuss...Maybe silly but serious question, s...
AriNV6pawsRider Safety Discuss...Maybe silly but serious question, s...
B SMITH10rhino 2Harley Tri GlideTrailering Tri Glide
B SMITH10DK Custom ProductsHarley Tri GlideTrailering Tri Glide
AriNV6Pegasus1300Rider Safety Discuss...Maybe silly but serious question, s...
AriNV6cycle7447Rider Safety Discuss...Maybe silly but serious question, s...
TomyJ16TomyJHome Built TrikesRebel RT
scaldedchevy3scaldedchevyLehman Trike2004 Gold Wing Lehman Monarch 2 Sho...
AriNV13Jack KlarichNew Member Introduct...New to trike
steelpony55553Jack KlarichDetailingCeramic coating
AriNV6Jack KlarichRider Safety Discuss...Maybe silly but serious question, s...
JTJersey5Jack KlarichHarley Freewheeler /...Removing Trim Around Oil Cooler
AriNV6AriNVRider Safety Discuss...Maybe silly but serious question, s...
AriNV6cycle7447Rider Safety Discuss...Maybe silly but serious question, s...
AriNV6AriNVRider Safety Discuss...Maybe silly but serious question, s...
steelpony55553AriNVDetailingCeramic coating
AriNV13AriNVNew Member Introduct...New to trike
JTJersey5Old Road DogHarley Freewheeler /...Removing Trim Around Oil Cooler
paid4c410VulcanscottHonda TrikesService for differential on a Motor...
DK Custom Products362New Orleans KevinHarley Tri GlideWhat did you do to Your Tri-Glide T...
AriNV13Pegasus1300New Member Introduct...New to trike
Jarhead17753GorillaHarley Freewheeler /...paint job
New Orleans Kevin6New Orleans KevinHarley Tri Glide2021 114 Triglide Stage 2 Feuling 4...
TomyJ8Jack KlarichSidecar ForumHackHer
JTJersey5Jack KlarichHarley Freewheeler /...Removing Trim Around Oil Cooler
AriNV4Jack KlarichCan Am Spyder Trike...I'm a total newbie ... Is the Spyde...
ISP-FL2ISP-FLThe Knife EnthusiestBenchmade Warranty
woody13Rmitchell55Maggie Valley Gather...Maggie Valley 2024
New Orleans Kevin6ISP-FLHarley Tri Glide2021 114 Triglide Stage 2 Feuling 4...
woody13Marc HMaggie Valley Gather...Maggie Valley 2024
woody13Marc HMaggie Valley Gather...Maggie Valley 2024
woody13PosseRiderMaggie Valley Gather...Maggie Valley 2024
ctdair8ctdairHarley Tri GlideHot Rotors After New Pads
New Orleans Kevin6NotgrownupHarley Tri Glide2021 114 Triglide Stage 2 Feuling 4...
New Orleans Kevin6PanheadSteveHarley Tri Glide2021 114 Triglide Stage 2 Feuling 4...
Donnimac4DonnimacHonda TrikesLehman Monarch II
Donnimac4DonnimacHonda TrikesLehman Monarch II
ken g9rhino 2Harley Tri Glidereverse not working
New Orleans Kevin6New Orleans KevinHarley Tri Glide2021 114 Triglide Stage 2 Feuling 4...
ken g9520fdHarley Tri Glidereverse not working
520fd3520fdFor Sale & WTB C...FS: Trike Mid-Step
JTJersey5JTJerseyHarley Freewheeler /...Removing Trim Around Oil Cooler
JTJersey5rhino 2Harley Freewheeler /...Removing Trim Around Oil Cooler
myhonda614TGHarley Tri GlideKuryakyn filler pad
JTJersey5JTJerseyHarley Freewheeler /...Removing Trim Around Oil Cooler
ken g9ken gHarley Tri Glidereverse not working
JTJersey5rhino 2Harley Freewheeler /...Removing Trim Around Oil Cooler
JTJersey5JTJerseyHarley Freewheeler /...Removing Trim Around Oil Cooler
myhonda6Rogue1Harley Tri GlideKuryakyn filler pad
myhonda614TGHarley Tri GlideKuryakyn filler pad
AriNV4AriNVCan Am Spyder Trike...I'm a total newbie ... Is the Spyde...
TFNC12AriNVNew Member Introduct...Just saying hello
Jarhead17753Jarhead1775Harley Freewheeler /...paint job
AriNV13AriNVNew Member Introduct...New to trike
AriNV13AriNVNew Member Introduct...New to trike
myhonda6Rogue1Harley Tri GlideKuryakyn filler pad
woody13woodyMaggie Valley Gather...Maggie Valley 2024
myhonda6NotgrownupHarley Tri GlideKuryakyn filler pad
New Orleans Kevin6NotgrownupHarley Tri Glide2021 114 Triglide Stage 2 Feuling 4...
Donnimac4MickHonda TrikesLehman Monarch II
Gernerwa11trike ladyNew Member Introduct...New Member from Bellingham, WA
myhonda6Rmitchell55Harley Tri GlideKuryakyn filler pad
Gernerwa11GorillaNew Member Introduct...New Member from Bellingham, WA
Yannick25GorillaVW Powered TrikesWil-Mac trike kit
woody13Marc HMaggie Valley Gather...Maggie Valley 2024
Donnimac4GorillaHonda TrikesLehman Monarch II
Gernerwa11rhino 2New Member Introduct...New Member from Bellingham, WA
Gernerwa11Marc HNew Member Introduct...New Member from Bellingham, WA
Gernerwa11Uncle FesterNew Member Introduct...New Member from Bellingham, WA
MDO100ZammyHarley Freewheeler /...What Did You Do To Your Freewheeler...
Gernerwa11ZammyNew Member Introduct...New Member from Bellingham, WA
AriNV13Phu CatNew Member Introduct...New to trike
New Orleans Kevin6New Orleans KevinHarley Tri Glide2021 114 Triglide Stage 2 Feuling 4...
Jjhooker22DeathBySnuSnuVW Powered TrikesSide shifter assembly for 1980 WilM...
Rodnok12ol' schoolNew Member Introduct...Hello Honda Trike owners!
AriNV13ol' schoolNew Member Introduct...New to trike
TFNC12ol' schoolNew Member Introduct...Just saying hello
AriNV13hardwickbvNew Member Introduct...New to trike
whiskeyneat10ol' schoolNew Member Introduct...Howdy"
Gernerwa11hardwickbvNew Member Introduct...New Member from Bellingham, WA
Gernerwa11ol' schoolNew Member Introduct...New Member from Bellingham, WA
scaldedchevy3MickLehman Trike2004 Gold Wing Lehman Monarch 2 Sho...
Jjhooker22Jjhooker2VW Powered TrikesSide shifter assembly for 1980 WilM...
Jack Klarich2TomyJTires, Wheels, Brake...Motorcycle Tire Reference
New Orleans Kevin6JTJerseyHarley Tri Glide2021 114 Triglide Stage 2 Feuling 4...
Jjhooker22DeathBySnuSnuVW Powered TrikesSide shifter assembly for 1980 WilM...
Gernerwa11GernerwaNew Member Introduct...New Member from Bellingham, WA
New Orleans Kevin6New Orleans KevinHarley Tri Glide2021 114 Triglide Stage 2 Feuling 4...
scaldedchevy3scaldedchevyLehman Trike2004 Gold Wing Lehman Monarch 2 Sho...
scaldedchevy3scaldedchevyLehman Trike2004 Gold Wing Lehman Monarch 2 Sho...
scaldedchevy3MickLehman Trike2004 Gold Wing Lehman Monarch 2 Sho...
ken g9OLBLUHarley Tri Glidereverse not working
Jjhooker22Jjhooker2VW Powered TrikesSide shifter assembly for 1980 WilM...
Yannick25Jjhooker2VW Powered TrikesWil-Mac trike kit
Yannick25Jjhooker2VW Powered TrikesWil-Mac trike kit
myhonda6SeaweedHarley Tri GlideKuryakyn filler pad
Donnimac4DonnimacHonda TrikesLehman Monarch II
Likes Likes:  36
Thanks Thanks:  0
Page 1 of 3 1 2 3 LastLast
Results 1 to 20 of 47

Thread: Stock Air Box Back On Re-Did, Re-Rout EBS Catch Can Set Up

  1. #1
    450+ Posts Bill G's Avatar
    Join Date
    Mar 2015
    Location
    Bakersfield California USA
    Posts
    474

    Default Stock Air Box Back On Re-Did, Re-Rout EBS Catch Can Set Up

    I installed the Stock Air Box back on our 2017 trike today. I also re-installed the (EBS) catch can set up I had previously used. I decided to re-rout it out of the air box and re-rout it under the frame.

    I think it turned out well. I had to make a clamp and mount it to the existing exhaust clamp (see pic hose running through clamp).

    I had to drill a small hole in the stock air boxs bottom for the hose to exit and rout the path of the hose not to touch anything and not to get melted.

    Ride Safe All,

    Bill G
    Attached Images Attached Images              
    Through Jesus Christ, I a sinner am saved. Not by my doing but through his doing by his sacrifice and Blood Shed on the Cross. His gift to all mankind that will only believe and accept him by Faith. Through his Death and Resurrection I am Saved by Grace and someday I will be with our Lord in Heaven forever.

  2. #2
    1000+ Posts
    Join Date
    Aug 2016
    Location
    Des Moines IA US
    Posts
    1,026

    Default

    Sorry your stage 1 air cleaner didn't work out for you, surprised you didn't take it the dealer for a download

    All for now Trampas

  3. #3
    450+ Posts Bill G's Avatar
    Join Date
    Mar 2015
    Location
    Bakersfield California USA
    Posts
    474

    Default

    Quote Originally Posted by Trampas View Post
    Sorry your stage 1 air cleaner didn't work out for you, surprised you didn't take it the dealer for a download

    All for now Trampas
    Trampas,

    My 2017 trike runs very well stock. For me the stage 1 was about looks and an experiment. My bubbly will buy the stage 1 from me for what I paid for it. He builds high end hot rod Harley motors at his engine shop.

    On the 2017 models with the 107 M8 there is no more downloads like on previous years. You have to now buy the HD Screaman Eagle EPA legal street tuner or an aftermarket tuner to tune the 2017 M8 engines.

    I did not want to spend $300.00 to $400.00 dollars to get that little extra. As said I find the 2017 trike with the 107 M8 to run just fine stock plenty of power.

    Also I can live with the looks of the stock air box. Plus I can now use my catch can mod.

    Ride Safe My Friend,

    Bill G
    Through Jesus Christ, I a sinner am saved. Not by my doing but through his doing by his sacrifice and Blood Shed on the Cross. His gift to all mankind that will only believe and accept him by Faith. Through his Death and Resurrection I am Saved by Grace and someday I will be with our Lord in Heaven forever.

  4. #4
    1000+ Posts
    Join Date
    Aug 2016
    Location
    Des Moines IA US
    Posts
    1,026

    Default

    You would have to buy a aftermarket tuner since the HD one is not for triglide, I looked it up one time when I was talking to the service department and they mention that one from harley. I looked at online and it does not show any triglide at one, everything is all 2 wheelers and even the CVO's. I called harley up and they said it is not recongnize by harley for triglides, I ask him why not and he could not answer it, go figure.

    All for now Trampas

  5. #5
    gerald martin
    Guest

    Default EBS

    I see that your hoses run up and over the air cleaner. You may have trouble with that as there may not be enough pressure to push the oil up and it may block off your air flow. I had that trouble with my freewheeler until I routed the hoses to all flow downward.

  6. DKCustoms postbit
  7. #6
    450+ Posts Bill G's Avatar
    Join Date
    Mar 2015
    Location
    Bakersfield California USA
    Posts
    474

    Default

    Quote Originally Posted by gerald martin View Post
    I see that your hoses run up and over the air cleaner. You may have trouble with that as there may not be enough pressure to push the oil up and it may block off your air flow. I had that trouble with my freewheeler until I routed the hoses to all flow downward.
    Thanks for your feed back,

    The factory hoses ran the same way over the filter. I had this same set up on my previous mod on this 2017 with no issues before I moved the catch can further down to the frame.

    I have seen simular mods done by others. It seems to work just fine, it is really just a vent. I don't think pressure plays to much into it functioning correctly as a vent.

    Also the 107 M8 vents to two diffrent places. Another vent goes to a space in the crankcase. Previous year Harley motors did not do this.

    What year was your Freewheeler??

    Time will tell.

    Ride Safe,

    Bill G
    Last edited by Bill G; 04-02-2017 at 08:58 PM.
    Through Jesus Christ, I a sinner am saved. Not by my doing but through his doing by his sacrifice and Blood Shed on the Cross. His gift to all mankind that will only believe and accept him by Faith. Through his Death and Resurrection I am Saved by Grace and someday I will be with our Lord in Heaven forever.

  8. #7
    450+ Posts Bill G's Avatar
    Join Date
    Mar 2015
    Location
    Bakersfield California USA
    Posts
    474

    Default

    Quote Originally Posted by Trampas View Post
    You would have to buy a aftermarket tuner since the HD one is not for triglide, I looked it up one time when I was talking to the service department and they mention that one from harley. I looked at online and it does not show any triglide at one, everything is all 2 wheelers and even the CVO's. I called harley up and they said it is not recongnize by harley for triglides, I ask him why not and he could not answer it, go figure.

    All for now Trampas
    Thats is news to me and you may be correct. My dealer tells a diffrent story. I talked to them about it just before I did my testing on the stage 1 without a tune being done.

    Ride Safe,

    Bill G
    Through Jesus Christ, I a sinner am saved. Not by my doing but through his doing by his sacrifice and Blood Shed on the Cross. His gift to all mankind that will only believe and accept him by Faith. Through his Death and Resurrection I am Saved by Grace and someday I will be with our Lord in Heaven forever.

  9. #8
    450+ Posts Bill G's Avatar
    Join Date
    Mar 2015
    Location
    Bakersfield California USA
    Posts
    474

    Default

    Quote Originally Posted by gerald martin View Post
    I see that your hoses run up and over the air cleaner. You may have trouble with that as there may not be enough pressure to push the oil up and it may block off your air flow. I had that trouble with my freewheeler until I routed the hoses to all flow downward.
    Gerald,

    The more I thought about it it made me think why take a chance. So I re-did the lines to go low it was easy enough to do. Why take a chance that it will be an issue on the road. It is just a vent so this way there should be no restriction at all.

    See pic's of re-rout to flow downward instead of over the filter.

    Thanks again for your feed back on this.

    Bill G
    Attached Images Attached Images      
    Through Jesus Christ, I a sinner am saved. Not by my doing but through his doing by his sacrifice and Blood Shed on the Cross. His gift to all mankind that will only believe and accept him by Faith. Through his Death and Resurrection I am Saved by Grace and someday I will be with our Lord in Heaven forever.

  10. #9
    gerald martin
    Guest

    Default vent

    Quote Originally Posted by Bill G View Post
    Gerald,

    The more I thought about it it made me think why take a chance. So I re-did the lines to go low it was easy enough to do. Why take a chance that it will be an issue on the road. It is just a vent so this way there should be no restriction at all.

    See pic's of re-rout to flow downward instead of over the filter.

    Thanks again for your feed back on this.

    Bill G
    looks good. you will have no problems now for sure.

  11. #10
    1000+ Posts
    Join Date
    Aug 2016
    Location
    Des Moines IA US
    Posts
    1,026

    Default

    Looks like you had to drill another hole in air cleaner by the looks of it, basically I think this looks better and it won't have to go uphill so to speak

    All for now Trampas

  12. #11
    450+ Posts Bill G's Avatar
    Join Date
    Mar 2015
    Location
    Bakersfield California USA
    Posts
    474

    Default

    Quote Originally Posted by Trampas View Post
    Looks like you had to drill another hole in air cleaner by the looks of it, basically I think this looks better and it won't have to go uphill so to speak

    All for now Trampas
    Yes, I had to drill another hole but it is on the inside of the air box out of sight. The hose would not squeeze between the filter and the cover coming down the front side so the hole had to be done.

    It worked out well this way. The hole also serves as a guide and support for the hoses path. Also the hole does not affect the function or strength of the air box in anyway.

    Take Care Friend,

    Bill G
    Through Jesus Christ, I a sinner am saved. Not by my doing but through his doing by his sacrifice and Blood Shed on the Cross. His gift to all mankind that will only believe and accept him by Faith. Through his Death and Resurrection I am Saved by Grace and someday I will be with our Lord in Heaven forever.

  13. #12
    40+ Posts
    Join Date
    Mar 2016
    Location
    Tehachapi, Ca, USA
    Posts
    42

    Default

    Thanks for this write-up. I have been considering the very same idea for my 2012 as I am running the stock air box with a K&N filter with the air box modified for increased air flow. Getting the oil vapor out of the air cleaner is a good idea and my ideas for an EBS are very close to what you did. Great pictures.

  14. #13
    250+ Posts
    Join Date
    Nov 2012
    Location
    Bradenton, FL.
    Posts
    255

    Cool Bill G ?

    Quote Originally Posted by Bill G View Post
    Gerald,

    The more I thought about it it made me think why take a chance. So I re-did the lines to go low it was easy enough to do. Why take a chance that it will be an issue on the road. It is just a vent so this way there should be no restriction at all.

    See pic's of re-rout to flow downward instead of over the filter.

    Thanks again for your feed back on this.

    Bill G
    Is this 3/8" fuel line you used for routing ? Looks like also 2- 90* elbows and a Tee ? Like this mod. I only have 100 miles on my 17 Tri with no oil yet showing in the filter area. I am surprised to see no drain hole in the plastic filter housing ,looks like water would puddle there. Thanks Doc

  15. #14
    250+ Posts
    Join Date
    Nov 2012
    Location
    Bradenton, FL.
    Posts
    255

    Cool

    Pulled the stock nipple, I see it is 1/4" Sorry.

  16. #15
    450+ Posts Bill G's Avatar
    Join Date
    Mar 2015
    Location
    Bakersfield California USA
    Posts
    474

    Default

    Quote Originally Posted by hddocfl View Post
    Is this 3/8" fuel line you used for routing ? Looks like also 2- 90* elbows and a Tee ? Like this mod. I only have 100 miles on my 17 Tri with no oil yet showing in the filter area. I am surprised to see no drain hole in the plastic filter housing ,looks like water would puddle there. Thanks Doc
    Doc,

    The tubing is 1/4" I believe. It is some tubing I had laying around from some smog stuff that was removed from a duel sport a few years back. Yes two 90 and a T, also some spring clips.

    The tubing needs to fit tight that's why I used the spring clips. When you change the venting from positive pressure to negative pressure with the mod. Any loose fitting hoses will or could weep oil vapor.

    I bet if you remove your air filter and look in the throttle body you will see a small puddle of oil in it like in the pic below.

    Harley has routed the vapor back in this way for years and has worked to meet EPA requirements. I look at it like this, if you can remove the hot oily vapor from the throttle body without major mods, why not.

    If it was a major mod I would have left things alone but it's a pretty simple mod to do. It has has to be better for the motor taking the hot vapor out of the throttle body.

    The pic below is of my 2017 trike stock set up at around 800 miles or so. I got the catch can from DK Customs. It seems to be the right size.

    Ride Safe,

    Bill G
    Attached Images Attached Images  
    Last edited by Bill G; 04-04-2017 at 09:50 AM.
    Through Jesus Christ, I a sinner am saved. Not by my doing but through his doing by his sacrifice and Blood Shed on the Cross. His gift to all mankind that will only believe and accept him by Faith. Through his Death and Resurrection I am Saved by Grace and someday I will be with our Lord in Heaven forever.

  17. DKCustoms postbit
  18. #16
    450+ Posts Bill G's Avatar
    Join Date
    Mar 2015
    Location
    Bakersfield California USA
    Posts
    474

    Default

    Quote Originally Posted by hddocfl View Post
    Pulled the stock nipple, I see it is 1/4" Sorry.
    Correct 1/4" also there is a very small seem at the bottom of the stock air box. I don't think it is air tight.

    I suppose this could weep water out but how affective it would be is another thing. Yes, I agree in your other post a weep hole might be a good thing.

    The long run of tubing I used is thicker more heavy duty in size but was 1/4". It all fit nice and tight.

    Take Care,

    Bill G
    Through Jesus Christ, I a sinner am saved. Not by my doing but through his doing by his sacrifice and Blood Shed on the Cross. His gift to all mankind that will only believe and accept him by Faith. Through his Death and Resurrection I am Saved by Grace and someday I will be with our Lord in Heaven forever.

  19. #17
    250+ Posts
    Join Date
    Nov 2012
    Location
    Bradenton, FL.
    Posts
    255

    Cool Bill G

    Quote Originally Posted by Bill G View Post
    Correct 1/4" also there is a very small seem at the bottom of the stock air box. I don't think it is air tight.

    I suppose this could weep water out but how affective it would be is another thing. Yes, I agree in your other post a weep hole might be a good thing.

    The long run of tubing I used is thicker more heavy duty in size but was 1/4". It all fit nice and tight.

    Take Care,

    Bill G
    Thanks for the pictures and info on the breather. I still have no oil in the intake dry as a bone but I am doing your mod anyway and drill a weep hole in the air box. I have always vented the breather to ground in years past and it has worked out great for me , Never did it with the stock air box. I like what you did and am going to do it. Thanks Doc

  20. #18
    250+ Posts
    Join Date
    Nov 2012
    Location
    Bradenton, FL.
    Posts
    255

    Default

    Quote Originally Posted by Bill G View Post
    Correct 1/4" also there is a very small seem at the bottom of the stock air box. I don't think it is air tight.

    I suppose this could weep water out but how affective it would be is another thing. Yes, I agree in your other post a weep hole might be a good thing.

    The long run of tubing I used is thicker more heavy duty in size but was 1/4". It all fit nice and tight.

    Take Care,

    Bill G
    OK I did your mod,
    Attached Images Attached Images                    

  21. #19
    250+ Posts
    Join Date
    Nov 2012
    Location
    Bradenton, FL.
    Posts
    255

    Cool

    All 1/4" with barbs on the fittings . Will not come loose. I show a pic of the holes I drilled in the air box the smaller is for a drain may not be needed but hay I was in there

    , 1/2"hole for the 1/4" ID fuel line. Plugged the back of the paper filter were the stock line went in. All went well and $28 at Ace they had it all.3 ft of 1/4" fuel line 2 mini clamps 2 90* nipples 1 Tee all with barbs. Thanks Bill G.

    These new breathers do not breath as much as the twin cam going by what I felt before the hose install at the breather bolts now it is all out the hose to atmosphere.

  22. #20
    250+ Posts
    Join Date
    Nov 2012
    Location
    Bradenton, FL.
    Posts
    255

    Default

    One of the pics shows the hose of the front breather in front of the filter but it is in a notch ground into the plastic.

Page 1 of 3 1 2 3 LastLast

Similar Threads

  1. Replies: 21
    Last Post: 03-21-2017, 07:45 PM
  2. Replies: 6
    Last Post: 01-14-2017, 02:31 AM
  3. Stock Mufflers Back On Freewheeler And I Am Ok With That
    By Bill G in forum Harley Freewheeler / Road Glide 3
    Replies: 24
    Last Post: 06-29-2016, 06:45 PM
  4. Wards Parts Werks FCS back in stock!
    By MDF48 in forum Harley Tri Glide
    Replies: 0
    Last Post: 06-29-2016, 08:04 AM
  5. Stock air filter back on....
    By krooozn in forum Honda Trikes
    Replies: 8
    Last Post: 05-16-2011, 11:58 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •