150 Most Recent Posts

Thread AuthorPostersPost AuthorForumThread/Post Link
Aging Gracefully1Aging GracefullyHarley Freewheeler /...switching Tri-Glide for Road Glide ...
agapsdiver5trike ladyHarley Freewheeler /...Completed Project: 2024 RG3 added T...
David35754WarpedThe Gun EnthusiastJust Gun Memes
agapsdiver5GorillaHarley Freewheeler /...Completed Project: 2024 RG3 added T...
Gfitzz536ROAD DOGGeneral Harley Chatengine oil transfer to primary side...
Gfitzz536Gfitzz53General Harley Chatengine oil transfer to primary side...
Amputee552ultrafxrHarley Tri GlideGas tank removal to replace handleb...
Rawhideken5ROAD DOGHarley Tri Glide2024 Tri glide
Amputee552Amputee55Harley Tri GlideGas tank removal to replace handleb...
Rawhideken5Peter A.Harley Tri Glide2024 Tri glide
Rawhideken5RawhidekenHarley Tri Glide2024 Tri glide
agapsdiver5agapsdiverHarley Freewheeler /...Completed Project: 2024 RG3 added T...
David35754rhino 2The Gun EnthusiastJust Gun Memes
David35754SullyThe Gun EnthusiastJust Gun Memes
SHARKDIVER2SHARKDIVERGeneral Harley Chatsuper shox
Rawhideken5Old Road DogHarley Tri Glide2024 Tri glide
Mykneesbehurtin9NotgrownupHarley Tri GlideTri Glide Reverse Motor
MDO100Freewheeling_Dude!Harley Freewheeler /...What Did You Do To Your Freewheeler...
Rawhideken10ol' schoolNew Member Introduct...Hi all new to this site ! hope I do...
consitter75Papa ZookGeneral DiscussionLate nighters---unite!!!
consitter75rhino 2General DiscussionLate nighters---unite!!!
Rawhideken10scuzziNew Member Introduct...Hi all new to this site ! hope I do...
consitter75Marc HGeneral DiscussionLate nighters---unite!!!
consitter751dn5upGeneral DiscussionLate nighters---unite!!!
Rawhideken10Marc HNew Member Introduct...Hi all new to this site ! hope I do...
Rawhideken10trike ladyNew Member Introduct...Hi all new to this site ! hope I do...
David35754Uncle FesterThe Gun EnthusiastJust Gun Memes
Mykneesbehurtin9rhino 2Harley Tri GlideTri Glide Reverse Motor
agapsdiver5RKplus10Harley Freewheeler /...Completed Project: 2024 RG3 added T...
Rawhideken10hardwickbvNew Member Introduct...Hi all new to this site ! hope I do...
Rawhideken10SullyNew Member Introduct...Hi all new to this site ! hope I do...
Rawhideken10Uncle FesterNew Member Introduct...Hi all new to this site ! hope I do...
agapsdiver5Papa ZookHarley Freewheeler /...Completed Project: 2024 RG3 added T...
agapsdiver5agapsdiverHarley Freewheeler /...Completed Project: 2024 RG3 added T...
agapsdiver5agapsdiverHarley Freewheeler /...Completed Project: 2024 RG3 added T...
agapsdiver5agapsdiverHarley Freewheeler /...Completed Project: 2024 RG3 added T...
DK Custom Products362ultrafxrHarley Tri GlideWhat did you do to Your Tri-Glide T...
Rawhideken10rhino 2New Member Introduct...Hi all new to this site ! hope I do...
DK Custom Products362ultrafxrHarley Tri GlideWhat did you do to Your Tri-Glide T...
Rawhideken5ROAD DOGHarley Tri Glide2024 Tri glide
Rawhideken5TrampasHarley Tri Glide2024 Tri glide
Rawhideken5RawhidekenHarley Tri Glide2024 Tri glide
Rawhideken5ROAD DOGHarley Tri Glide2024 Tri glide
JerseyGirlRider9Papa ZookHarley Freewheeler /...Road Glide 3 - Is this normal?
JerseyGirlRider9RKplus10Harley Freewheeler /...Road Glide 3 - Is this normal?
Rawhideken10Papa ZookNew Member Introduct...Hi all new to this site ! hope I do...
Rawhideken10RawhidekenNew Member Introduct...Hi all new to this site ! hope I do...
Rawhideken5RawhidekenHarley Tri Glide2024 Tri glide
Rawhideken10Papa ZookNew Member Introduct...Hi all new to this site ! hope I do...
GPz11002GPz1100General DiscussionHonda Valkyrie Conversions
Gfitzz536ROAD DOGGeneral Harley Chatengine oil transfer to primary side...
Rawhideken10RawhidekenNew Member Introduct...Hi all new to this site ! hope I do...
Sully1SullyGeneral DiscussionHAPPY St. PATRICKS DAY
Gfitzz536Gfitzz53General Harley Chatengine oil transfer to primary side...
GPz11009hardwickbvNew Member Introduct...I'm Back
DrCrazyTrain12hardwickbvNew Member Introduct...Introduction
Hogman196tpb857Harley Tri GlideCobra # 6256 Pro chamber headpipes
ISP-FL2NotgrownupHarley Tri GlideMaybe Not Correct Fitment
Mykneesbehurtin9ISP-FLHarley Tri GlideTri Glide Reverse Motor
ISP-FL2ISP-FLHarley Tri GlideMaybe Not Correct Fitment
Bouncer9ISP-FLHarley Tri GlideDrive Belt Replacement Time
Gfitzz536ROAD DOGGeneral Harley Chatengine oil transfer to primary side...
Gfitzz536ROAD DOGGeneral Harley Chatengine oil transfer to primary side...
Gfitzz536Gfitzz53General Harley Chatengine oil transfer to primary side...
Bouncer9NotgrownupHarley Tri GlideDrive Belt Replacement Time
ISP-FL2NotgrownupHarley Tri GlideMaybe Not Correct Fitment
consitter751dn5upGeneral DiscussionLate nighters---unite!!!
JerseyGirlRider9NotgrownupHarley Freewheeler /...Road Glide 3 - Is this normal?
Chief80138NotgrownupHarley Tri GlideHow many miles on your Triglide?
GPz11009NotgrownupNew Member Introduct...I'm Back
SHARKDIVER2NotgrownupGeneral Harley Chatsuper shox
Notgrownup3NotgrownupHarley Tri GlideClutch lever not touching the safet...
DK Custom Products362NotgrownupHarley Tri GlideWhat did you do to Your Tri-Glide T...
GPz11009hogmemberisoldNew Member Introduct...I'm Back
GPz11002Papa ZookGeneral DiscussionHonda Valkyrie Conversions
GPz11009trike ladyNew Member Introduct...I'm Back
consitter75consitterGeneral DiscussionLate nighters---unite!!!
GPz11009SullyNew Member Introduct...I'm Back
Chief80138RKplus10Harley Tri GlideHow many miles on your Triglide?
Oldrodder2Marc HHarley Trike Convers...Pingel electric shift
14TG214TGHarley Tri GlideValve stem clearance
Oldrodder4Papa ZookHarley Trike Convers...2006 CVO with M/T Gladiator with el...
GPz11009Marc HNew Member Introduct...I'm Back
14TG2Papa ZookHarley Tri GlideValve stem clearance
14TG214TGHarley Tri GlideValve stem clearance
Chief80138rhino 2Harley Tri GlideHow many miles on your Triglide?
GPz11009rhino 2New Member Introduct...I'm Back
consitter75ZammyGeneral DiscussionLate nighters---unite!!!
GPz11009ZammyNew Member Introduct...I'm Back
GPz11009GPz1100New Member Introduct...I'm Back
Gfitzz536ROAD DOGGeneral Harley Chatengine oil transfer to primary side...
GPz11002GPz1100General DiscussionHonda Valkyrie Conversions
JerseyGirlRider9JerseyGirlRiderHarley Freewheeler /...Road Glide 3 - Is this normal?
Chief80138Artpe54Harley Tri GlideHow many miles on your Triglide?
DK Custom Products362NotgrownupHarley Tri GlideWhat did you do to Your Tri-Glide T...
Notgrownup3NotgrownupHarley Tri GlideClutch lever not touching the safet...
SHARKDIVER2SHARKDIVERGeneral Harley Chatsuper shox
Rogue16Rogue1Harley Tri GlidePowder coating
Oldrodder2OldrodderHarley Trike Convers...Pingel electric shift
consitter75trike ladyGeneral DiscussionLate nighters---unite!!!
Papa Zook96Phu CatBBQ, Grilling, Cooki...Whats for supper?
Noodles1076Phu CatHarley Freewheeler /...Battery ??
Rogue16David792Harley Tri GlidePowder coating
Gfitzz536Gfitzz53General Harley Chatengine oil transfer to primary side...
Gfitzz536Gfitzz53General Harley Chatengine oil transfer to primary side...
Papa Zook96SullyBBQ, Grilling, Cooki...Whats for supper?
DK Custom Products362Jd1aHarley Tri GlideWhat did you do to Your Tri-Glide T...
Gfitzz536Dan SCGeneral Harley Chatengine oil transfer to primary side...
Gfitzz536ROAD DOGGeneral Harley Chatengine oil transfer to primary side...
ISP-FL10cycle7447General Harley ChatDealer Charging For CC usage
Burnerboy4BurnerboyRoadsmith Trikes
...
I finally got my TRIKE out of hiber...
Noodles1076Old Road DogHarley Freewheeler /...Battery ??
DrCrazyTrain12CCjonNew Member Introduct...Introduction
ISP-FL10rhino 2General Harley ChatDealer Charging For CC usage
consitter75rhino 2General DiscussionLate nighters---unite!!!
DK Custom Products362Jarhead82Harley Tri GlideWhat did you do to Your Tri-Glide T...
Papa Zook2GorillaGeneral DiscussionNew Dedicated Motor Trike, Hannigan...
Rogue1614TGHarley Tri GlidePowder coating
Noodles1076Papa ZookHarley Freewheeler /...Battery ??
Burnerboy4tourmanRoadsmith Trikes
...
I finally got my TRIKE out of hiber...
GPz11002Papa ZookGeneral DiscussionHonda Valkyrie Conversions
Noodles1076WindyOneHarley Freewheeler /...Battery ??
consitter75trike ladyGeneral DiscussionLate nighters---unite!!!
Noodles1076Noodles107Harley Freewheeler /...Battery ??
Rogue16JTJerseyHarley Tri GlidePowder coating
ISP-FL10BurnerboyGeneral Harley ChatDealer Charging For CC usage
Gfitzz536MykneesbehurtinGeneral Harley Chatengine oil transfer to primary side...
GPz11002GPz1100General DiscussionHonda Valkyrie Conversions
ISP-FL10My TurnGeneral Harley ChatDealer Charging For CC usage
ISP-FL10cycle7447General Harley ChatDealer Charging For CC usage
Gfitzz536Gfitzz53General Harley Chatengine oil transfer to primary side...
Gfitzz536ROAD DOGGeneral Harley Chatengine oil transfer to primary side...
Noodles1076ROAD DOGHarley Freewheeler /...Battery ??
ISP-FL10ROAD DOGGeneral Harley ChatDealer Charging For CC usage
ISP-FL10JTJerseyGeneral Harley ChatDealer Charging For CC usage
Papa Zook2Papa ZookGeneral DiscussionNew Dedicated Motor Trike, Hannigan...
Oldrodder4OldrodderHarley Trike Convers...2006 CVO with M/T Gladiator with el...
JerseyGirlRider9JerseyGirlRiderHarley Freewheeler /...Road Glide 3 - Is this normal?
ISP-FL10KrazeehorseGeneral Harley ChatDealer Charging For CC usage
Papa Zook2Papa ZookGeneral DiscussionNew Dedicated Motor Trike, Hannigan...
Noodles1076Noodles107Harley Freewheeler /...Battery ??
Noodles1076Papa ZookHarley Freewheeler /...Battery ??
Noodles1076Noodles107Harley Freewheeler /...Battery ??
JerseyGirlRider9Papa ZookHarley Freewheeler /...Road Glide 3 - Is this normal?
Rogue16Rogue1Harley Tri GlidePowder coating
Rogue16PanheadSteveHarley Tri GlidePowder coating
ISP-FL10rhino 2General Harley ChatDealer Charging For CC usage
Gfitzz536rhino 2General Harley Chatengine oil transfer to primary side...
JerseyGirlRider9Phu CatHarley Freewheeler /...Road Glide 3 - Is this normal?
Baldy_543MickHonda TrikesOkay on Cinco De Mayo
Likes Likes:  31
Thanks Thanks:  0
Results 1 to 13 of 13

Thread: Stupid question time!

  1. #1
    "Tin Man"
    Gold Club Member
    Doug D.'s Avatar
    Join Date
    May 2012
    Location
    Vienna, MO USA
    Posts
    535
    Thanks
    0
    Thanked 3 Times in 3 Posts

    Default Stupid question time!

    Ok guys, I need to pick a brain or two...

    First, does anybody have a sure fire trick for getting frozen intake studs out of a head? I just acquired an 1835 long block, and the intake studs on the 1-2 side need to be replaced. I've tried all I know except the liberal application of heat, which I'm reluctant to employ without a little sound advice.

    Second, I've been told the 1835 will make too much torque for a standard bug 4-speed and will twist the guts out of it. Any truth to this?

    Thanks in advance for your help, and patience with my dumb azz...

    PEACE and ride safe!
    "The test of the machine is the satisfaction it gives you. There isn't any other test. If the machine produces tranquility, it's right. If it disturbs you, it's wrong until either the machine or your mind is changed." - Robert M. Pirsig, Zen and the Art of Motorcycle Maintenance: An Inquiry Into Values

  2. #2
    102000 + Posts
    Gold Club Member
    rhino 2's Avatar
    Join Date
    Oct 2011
    Location
    Utopia New Jersey USA..
    Posts
    103,466
    Thanks
    0
    Thanked 1 Time in 1 Post

    Default

    Heat the studs a little and light a candle drip some of the candle wax on them, Some times the wax will flow down the threads and you can spin the studs out....
    Sometimes a Cigar is Just a Cigar.....
    2019 Tri-Glide.......

  3. #3
    Old Redneck Motorhead
    VW Tech Contributor
    TrikeTalk Moderator
    DeathBySnuSnu's Avatar
    Join Date
    Mar 2012
    Location
    Vicksburg MS USA
    Posts
    1,756
    Thanks
    0
    Thanked 0 Times in 0 Posts

    Default

    Heat it.

    Dont burn it up though, be more gentle than you would with iron.

    Auto trans oil and acetone makes a potent penetrate.

    1835..... 92 bore and stock stroke?

    No biggie.

    You can break a stock trans with a stock 1600 and a grippy clutch.

    Other than dumping the clutch, sticky tires, like in drag racing, you dont have much to worry about under 100 hp.

    Especially with a light trike.

    The gears themselves will hold quite a lot.

    It is everything else that breaks.

    First thing to show up is case flex. Ring and pinion dont stay in line. So billet side cover on thrust side.

    Then axle spyder gears sometimes. It seams that if the axles are more straight out and no drag slicks they stay put. But lowered or raised and some rough driving, think rough driving a baja off road with big tires, breaks them. 4 spyder diff unit.

    At about 100 hp the syncro hubs start spinning. They are only press fit onto the gears. Weld the syncros onto the gears.

  4. #4
    "Tin Man"
    Gold Club Member
    Doug D.'s Avatar
    Join Date
    May 2012
    Location
    Vienna, MO USA
    Posts
    535
    Thanks
    0
    Thanked 3 Times in 3 Posts

    Default

    Quote Originally Posted by rhino 2 View Post
    Heat the studs a little and light a candle drip some of the candle wax on them, Some times the wax will flow down the threads and you can spin the studs out....
    Thanks, rhino! I never would've thought about the candle wax!

    Quote Originally Posted by DeathBySnuSnu View Post
    1835..... 92 bore and stock stroke? No biggie. You can break a stock trans with a stock 1600 and a grippy clutch. Other than dumping the clutch, sticky tires, like in drag racing, you dont have much to worry about under 100 hp. Especially with a light trike.

    The gears themselves will hold quite a lot.

    It is everything else that breaks.

    First thing to show up is case flex. Ring and pinion dont stay in line. So billet side cover on thrust side.

    Then axle spyder gears sometimes. It seams that if the axles are more straight out and no drag slicks they stay put. But lowered or raised and some rough driving, think rough driving a baja off road with big tires, breaks them. 4 spyder diff unit.

    At about 100 hp the syncro hubs start spinning. They are only press fit onto the gears. Weld the syncros onto the gears.
    Yep, 92 bore and stock stroke with an Engle W-100 cam. It'll get a 2bbl carb and a set of 1.25:1 rockers. I'm not sure where that puts it, but it probably won't make 100 hp.

    Oh, and my clutch dumpin', sticky tire, drag racin' days have been over for while. I ride like an old man, or so I've been told...

    Again, thanks guys. I knew I came to the right place!

    PEACE and ride safe!
    "The test of the machine is the satisfaction it gives you. There isn't any other test. If the machine produces tranquility, it's right. If it disturbs you, it's wrong until either the machine or your mind is changed." - Robert M. Pirsig, Zen and the Art of Motorcycle Maintenance: An Inquiry Into Values

  5. #5
    Old Redneck Motorhead
    VW Tech Contributor
    TrikeTalk Moderator
    DeathBySnuSnu's Avatar
    Join Date
    Mar 2012
    Location
    Vicksburg MS USA
    Posts
    1,756
    Thanks
    0
    Thanked 0 Times in 0 Posts

    Default

    You are probably looking at 75 to 80 hp.

    W100 is about all you want with a single carb.

    Trans will be fine.

    Early swing being the weakest.

    Late model single side cover being the strongest.

  6. #6
    33500+ Posts
    Gold Club Member
    David357's Avatar
    Join Date
    May 2015
    Location
    Hobe Sound, FL.
    Posts
    33,953
    Thanks
    0
    Thanked 0 Times in 0 Posts

    Default

    Quote Originally Posted by Doug D. View Post

    Again, thanks guys. I knew I came to the right place!

    PEACE and ride safe!
    Doug, you will find that most questions will get constructive responses here on the Trike Talk site.

    So please feel free to ask away.

  7. #7
    "Tin Man"
    Gold Club Member
    Doug D.'s Avatar
    Join Date
    May 2012
    Location
    Vienna, MO USA
    Posts
    535
    Thanks
    0
    Thanked 3 Times in 3 Posts

    Default

    Click image for larger version. 

Name:	20170418_170825.jpeg 
Views:	176 
Size:	743.3 KB 
ID:	44396

    Well, just my sh!thouse luck...

    Got the first one to turn out with some heat and a pair of vise grips. The second one snapped off in a big hurry, flat with the gasket surface. There MIGHT be half a thread sticking out above the surface. So, tomorrow I have a riding buddy coming by with a portable welder. He runs a shop in Vienna and says he has a trick for getting broken studs out of aluminum heads. If it works, I'll post pics of the process. For tonight, I'm just disgusted and calling it quits for the evening.

    PEACE and ride safe!

    P.S. Sorry for the enormous attachment. Not sure where that went wrong...
    "The test of the machine is the satisfaction it gives you. There isn't any other test. If the machine produces tranquility, it's right. If it disturbs you, it's wrong until either the machine or your mind is changed." - Robert M. Pirsig, Zen and the Art of Motorcycle Maintenance: An Inquiry Into Values

  8. #8
    500+ Posts LarryA's Avatar
    Join Date
    Jun 2016
    Location
    milnor n.d. usa
    Posts
    548
    Thanks
    0
    Thanked 0 Times in 0 Posts

    Default reply

    removed a lot of broken studs on blanking and forming dies......now this was in steel.....i think the same principal applies.... we used 3/32 stainless welding rods cut to about 3in long. had a piece of scrap close to the broken stud used to strike the arc and warm up the rod. i have used dc reverse or ac 60/75 amps strike the arc on the scrap then swing over to the stud, keep a short arc for 3 seconds or so making a ball on the stud, when it cools from red....tap on the stud,,,,the ball will spread out..about the dia. of the stud....repeat weld and tapping about 3 or 4 times or until enough material there to get a vise grip on the ball. then turn out the stud,,,,the heating and pounding loosens the threads enough to remove the stud, the welding just gives you something to grip on. we found stainless steel arc rods work the best. if the threads were not jammed we welded a bolt to the ball by holding the bolt at a 45 deg angle to the ball. then tip the bolt slowly vertical while welding. then screwed it out with an impact wrench. anyhow my. 02 looking forward to seeing your friends method! good luck!

  9. #9
    Old Redneck Motorhead
    VW Tech Contributor
    TrikeTalk Moderator
    DeathBySnuSnu's Avatar
    Join Date
    Mar 2012
    Location
    Vicksburg MS USA
    Posts
    1,756
    Thanks
    0
    Thanked 0 Times in 0 Posts

    Default

    Weld a nut to it.

    Weld down in the hole in center of nut.

  10. #10
    "Tin Man"
    Gold Club Member
    Doug D.'s Avatar
    Join Date
    May 2012
    Location
    Vienna, MO USA
    Posts
    535
    Thanks
    0
    Thanked 3 Times in 3 Posts

    Default

    Quote Originally Posted by DeathBySnuSnu View Post
    Weld a nut to it.

    Weld down in the hole in center of nut.
    That's what worked! Started by welding a flat washer to the stud, then a nut to the washer. Took two attempts, but out it came, slick as a whistle. With that out of the way, it's time to mock up the ancillary stuff and get this beast on the road!

    Thanks again, guys!

    PEACE and ride safe!
    "The test of the machine is the satisfaction it gives you. There isn't any other test. If the machine produces tranquility, it's right. If it disturbs you, it's wrong until either the machine or your mind is changed." - Robert M. Pirsig, Zen and the Art of Motorcycle Maintenance: An Inquiry Into Values

  11. #11
    1000+ Posts
    VW Tech Contributor
    stinger608's Avatar
    Join Date
    Jan 2014
    Location
    Cheyenne Wyoming USA
    Posts
    1,136
    Thanks
    0
    Thanked 0 Times in 0 Posts

    Default

    Quote Originally Posted by DeathBySnuSnu View Post
    Weld a nut to it.

    Weld down in the hole in center of nut.
    I was just going to suggest this trick. Of course, Rex beat me to it.

    Awesome that it worked for ya Doug!!!

    And on the power questions; I built an 1835 about 2 years ago now. It is running an Engle W110, straight cut timing gears, counterweighted crank, big valve heads, 1.25 rockers, dual 40mm EMPI (Weber copies) carbs, and a 4 into 1 header.

    I'm running a stock transaxle with solid mounts and have never had a single issue.

    If you "ride like an old man" you should be just fine bro.

  12. #12
    850+ Posts vwbug72501's Avatar
    Join Date
    Apr 2015
    Location
    Batesville, AR. 72501
    Posts
    859
    Thanks
    0
    Thanked 0 Times in 0 Posts

    Default

    FYIY:

    Had basically the same setup as Stinger (progressive 2 barrel rather than dual carbs) in a baja bug back in the day. I "drove it like I stole it" for 5 years. Bent the front end twice from jumping it and pulled some head studs out of the case. Never had a problem with the stock trans. Maybe I was lucky but I don't think you'll have any problems with your setup.

    Enjoy the ride!

  13. #13
    "Tin Man"
    Gold Club Member
    Doug D.'s Avatar
    Join Date
    May 2012
    Location
    Vienna, MO USA
    Posts
    535
    Thanks
    0
    Thanked 3 Times in 3 Posts

    Default

    Thanks, guys! As always, the help and support I get here is outstanding. Occasionally, I chime in with info trying to help somebody out, but what I contribute isn't anywhere close to what I get back. You can't put a price on the cumulative knowledge and experience found on this forum.

    PEACE and ride safe!
    "The test of the machine is the satisfaction it gives you. There isn't any other test. If the machine produces tranquility, it's right. If it disturbs you, it's wrong until either the machine or your mind is changed." - Robert M. Pirsig, Zen and the Art of Motorcycle Maintenance: An Inquiry Into Values

Similar Threads

  1. Stupid question of the day.
    By JaysGone in forum Honda Trikes
    Replies: 24
    Last Post: 11-04-2016, 12:39 PM
  2. Hmmmm...probably a stupid question
    By Harry2u in forum Honda Trikes
    Replies: 6
    Last Post: 08-30-2013, 06:52 AM
  3. Really stupid electrical question
    By mikestrike in forum Harley Trike Conversions
    Replies: 3
    Last Post: 07-06-2013, 08:30 AM
  4. Stupid coil question
    By vwjoe in forum VW Powered Trikes
    Replies: 13
    Last Post: 01-08-2012, 08:33 PM
  5. Stupid question of the day.....:)
    By TrikerMimi in forum Honda Trikes
    Replies: 5
    Last Post: 06-16-2010, 10:25 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •