Trikers with Voyagers: This is going be a continuing thread. My aim is to take the metal-to-metal contact out of the suspension forks on the Voyager kit I have. It is an old one with twin shocks, but the principle is the same on the forks and the fork hangers. I will replace the hangers (wet or grease bolts), bushings to nylon, side isolation with nylon washers, and radius the edges of the fork itself so it will not cut into the nylon bushings. I have most of the locations for parts lined up, and will post pictures and parts availability list, prices, and part numbers as I go. As well, I will pass along the riding experience and capability of new part set-up. I am not sponsoring or supporting any particular retail dealer or manufacturer. Everything is coming off the internet.
Oldveteran (I don't give up easily!)