has anybody installed the tri glide saddle bags from HD. The dealer wants 2 1/2 hours to install them. I do not want to try to install the with velcro. Thanks
has anybody installed the tri glide saddle bags from HD. The dealer wants 2 1/2 hours to install them. I do not want to try to install the with velcro. Thanks
Sometimes a Cigar is Just a Cigar.....
2019 Tri-Glide.......
Unless you use a sky hook, good 3M sticky Velcro should work. Use the wide one.
Or as Bob stated, bolt and nut. Not a fan of that method if avoidable .
2012 Triglide Piaggio MP3 500 to get groceries 1991 FLHS as back up
"Better to have it and not need it than need it and not have it !"
Tiffany, Olive, Daisy, “The Three Musketeers” together again.
One of the sponsors on here "See Through Braz" has a no drill saddle bag install kit.
2016 Triglide Vivid Black (Black Bear).
I installed mine with 3M DUAL LOCK and they have held up great with no issues. This stuff IS NOT VELCRO.
No holes drilled!!!! (My verticals lock to my horizontals .... otherwise it would damn near be impossible to pop them off!!!) Same stuff as EZ-Pass connection to windshields.
The template supplied with the kit is very poor .... and I have seen Dealers really botch the job of a drilled install.
https://www.itapestore.com/3M-dual-l...-the-yard.aspx
3M dual lock I like that idea , It’s also easier to clean the debris out of with a nail brush, as Velcro is not cleanable, once dirty, N/ G .
2012 Triglide Piaggio MP3 500 to get groceries 1991 FLHS as back up
"Better to have it and not need it than need it and not have it !"
Tiffany, Olive, Daisy, “The Three Musketeers” together again.
I had a set put on my 2012 TG and the dealer installed them crooked. There was a set missing from the instructions. They corrected it. On my 2014 they got it right.
I have absolutely no problem putting a couple holes in the fender - what's the problem?? There are already holes in them.
I agree, the plastic Velcro type tape that comes with the I-Pass is great stuff and will hold a ton - BUT - the $#@% adhesive (on any type tape) isn't worth $hit. I have had many items come unglued due to the heat. So I will NEVER trust tape again no matter what the guaranty says. Fool me once.......etc. I love the security and peace of mind a nut and bolt give. When it comes to my cameras etc., I ain't takin' a chance.
HDBOB, looks great - that's the way the bags should look.
Good luck with whatever you decide.
IBA#61162
PATRIOT GUARD
USMC
Saddle Bag Kit
Great kit. I used it to install my bags...
8~\o
"Anybody can become an American but ya have to be born a TEXAN"
"Ya know I haven't been everywhere but it's on my bucket list"
The See Through Braz kit works great. Had the kit on my 2015, one of the first things I installed on my 2017.
Seethroughbras on my 2014 & switched over to the 2017. Worked good on both. Plus great service from AL w/ seethroughbras!
Yep, Did mine on my T/G a couple of weeks ago....got the HD bags from Dealer...the bags come with mounting brackets and paper cut out jig....tried the "Velcro type" mount but didnt like it as I felt they stuck out too far from the body....and I noticed that due to the slightly concave design of the body, the velcro only actually sticks on certain center spots.
....Soooooo, I just got the drilled out and took the plunge and installed the bags per Harley instructions.........Now, I moved the 2 bottom drill hanger holes 1/2 inch towards the center of the trike...................this allowed the outside edge of the bags to"Not get so close" to the outside edge of the trike body.....Improved look (I think).
....do the top hole of each bag LAST of course! ...All the holes can be wobbled out a bit too allow for more perfect final alignment.......go slow!!!!!
.....took me 2 days to get the courage to drill first hole.....took 3 hrs or so to fish job to my liking.............really not a hard job.
....glad I did the HD actual mounting.
Congrats
IBA#61162
PATRIOT GUARD
USMC
Purchased the Harley trike saddlebags for our 2015 TriGlide. The dealership wanted 2 hours of labor time to put these on. I elected to do it myself. Took less than an hour for both. TIP...lay down painters tape where you are going to drill your holes. It will leave them clean. Follow the instructions for the template placement and the rest is pretty easy!
I have had 3 trikes so far & have installed them myself on all 3. No problems just pay attention to what you're doing. Like someone earlier said, place some painters tape where you need to drill.
I had dealer include the bags and install them on my '15 TG...came out great. Told me that it took about 2.5 hours as they had to pull both back wheels to gain access to the inside of the fender. The quarter-turn lock is really nice when you want to take the bags into a hotel room or tent for the night.I agree with not trusting Velcro or other hook-and-loop[ systems.
Those little things are called saddlebags?
What aggravates me is there are no pictures or videos on their website showing you how the darn kit works. I would never buy something from a company that doesn't even show the kit or instructions on their website. How the hell does this kit work and how do you install it? I could not even find a You Tube video on it. Thanks
I agree. If the bags are attached with some kind of tape, I would NEVER trust it to hold my very expensive camera as I do with the bolt on H-D bags.
I've seen the adds showing a man standing on the bags. I can be supported with a piece or folded paper without falling, but what happens if you jump up and down on that folded paper? It crushes and fails. How do the bags hold up under constant jerking??
I would love to see how these bags are attached.
IBA#61162
PATRIOT GUARD
USMC