Likes: 36
Thanks: 0
Les. Can I suggest that you contact Steve Kaufman in the Alcoa-Maryville area. He is a three time National Flatpicking champion. If there are any good luthiers nearby, he would know. take care of that baby, they're not making pre-war Martins anymore. Steves website has his phone and email at the bottom of the page.Originally Posted by dadztoy
http://www.flatpik.com
Sorry for the hi-jack.
Bill
2010 Tri-glide, Red Hot Sunglo
R I P MANDY
Thanks Bill - appreciate the thought and recommendation... I'll give him a call on Monday and see what he has to say... Toured the Martin factory about 2 years ago and then had the opportunity to play some of their high end guitars in the Premier showroom - awesome experience... Would love to order a custom made Martin but the price and my arthritic hands are too much of a deterrent these days... Think the customs start at $3500 and go up from there with a minimum of a year wait... Was a great factory tour though - many operations still done by hand...
Les
Les
How is the action on your guitar, the strings above the neck? Should be a 25 cent piece thickness at the 12th fret on the low E string . If not then First the relief must be set. To check the relief just put a Capo at the first fret and fret the low E string, largest string, at the 14th fret. Now tap the E string at the 6th or 7th fret. The string should be just a hair off the frets. You should hear a tinging sound as you tap the string, showing you it's just off the frets. Relief is the strings to the fret board and NOT the strings to the body.
Some just crank the truss rod to get this adjustment and that can warp the neck. Now the relief is set right no matter how high the strings are off the neck with the capo removed. If the strings are still off the neck too much at the 12th fret, then the nut and saddle must be shaved down. On most Martins the saddle is glued in and must be steamed off. You got to know what you are doing to do this. I have done a few and know how.
After the saddle is removed it must be sanded down at a 90 degree angle, using a gig, on a piece of glass using light gauge sandpaper. Same with the nut. They are both made out of bone and not plastic. If you sand too mush then the guitar will bang and you will have to start over with a new saddle and or nut. It can take 8 hours to do this.
It's no big deal to me but you many want to have it done at a good shop. Well this will help you knowing what needs to be done and how it is done! Bob
What takes the time is steaming and sanding.
1. Steaming is done with a hot air gun and water. The body around the bridge must be covered to protect the finish I use felt. Then Cardboard covered with aluminum foil around the bridge. Drops of water are put in the crack between bridge and saddle not bridge and body. This takes time not to damage the guitar.
2. Sanding is slow as you sand a little and then put everything back together and tune all stings to 440 and check it, each time you do a little sanding. Making sure you don't over sand. On a vintage instrument like yours. You sure don't want a new saddle or nut put on it if you can avoid it!
It actually can be more to it than I'm saying here.
This is assuming you neck is straight and you have a truss rod.
The neck is correctly attached to the body etc.
Intonation on an acoustic takes a lot more time.
To check intonation the strings at the 12th fret should be EADGBE just like played open!
Thanks for all the info Bob but I would never attempt that repair... I'll take it to a good Luthier and let him have at it...
I'll have to drag it out of the closet and have a look at it... Was pretty nice here today but no ride for me as there is still brine and salt on the roads... Rain coming in tomorrow so if we get a decent day after that, I'll jump on the bike and ride a bit... Was about 62 here today with a promise of more of that to come next week...
Les
Weather was cloudy and windy but not cold. We road to some friends house a few miles away for my monthly hair cut and then road to three Casinos to hustle music work. One may be interested. Hard to get in the door with these guys. They have their music all lined up. Hope n to get in when someone can't do the Gig! Plus managers not there on Sunday's. The pay is Good if you can get in the door.
Good luck with the gig search Bob - hope you land a few to pay for that Tow Pac
Rainy here today and colder tomorrow but supposed to be in the low 60's by Friday... With the rain today, all the brine and salt should be washed away so a ride Friday looks possible...
Les
New member of the CVMA.
Awesome looking biker - love the blue boots!!!I assume this is the grandson???
Yes my grandson! His little sister has the pink boots! They keep them at Maw Maw and Paw Paw's house as we have a horse and a big yard! He spent the night and after pancakes and feeding the cats, dogs and horse we had to go for a ride around the yard!
Tow-Pac has still not sent me a full refund! I have called four times on this matter!
I can forget about getting the $150.00 I have in shipping! I can't even get back what is due me!
I give them one more week after I call them tomorrow.
It's like pulling teeth!
I'll bet they love the horse!!! Went to my 7 year old nephews birthday party yesterday... I'm the cool uncle that gives him rides on my motorcycle!!
I talked to Jeremy at Tow Pac the other day as I had to order new rubber grommets for my fenders... Also spoke with him regarding my fender vibration at over 70MPH... I have to say he was pretty helpful and I just received the new grommets so I have no negative comments about my experiences with them except they did a less that ideal job of installing my kit as I had to reroute quite a few wiring harnesses so I could remove my saddle bags and avoid chafing of the main jarness...
Hope you get your money back Bob - remember - "it's the squeaky wheel that gets the grease"!!!
Les
Jeremy is the guy I have been dealing with from day one! He told me if I return the kit I would Not be charged a restocking charge. Now it looks like not only did they charge me a restocking charge on the reverse but also on the parts I ordered from them to replace the reverse!
Bummer!!! Sorry for your bad experience...
I just got off the phone with Jeremy.
He admitted there was something wrong with the reverse design for the14" wheels.
It's for 10" wheels and not 14".
He will talk to front office!
That's what I thought when I saw the design... Would probably work well with units like mine with 12" wheels... Still, seems to be quite under powered if you cannot sit on the bike and back up eh??? Sounds like a redesign is on order - at least use a motor with a bit more "smash" instead of a car window motor!!! A small car starter motor would do nicely or even a commercial gear motor...
I'm switching gears here Bob and doing a bit of work on my truck for a while... Just purchased new steering stabilizer shock and will be buying new suspension shocks as well and installing them in the near future... Need to keep the old gal (2000 F-250SD) running as I certainly can't afford a new one at today's ridiculous prices...
Gonna be down by you in a few days... Spending a few days in "The Big Easy" courtesy of my bride of 37 years to celebrate my upcoming birthday... Love "Nu Awlins" and all that goes with it... Hope it's a bit warmer than it is here...
Les
I never buy new and pay cash when I can.
Will you make the Mardi Gras?
The Jeep I will be driving with my wife and one of the Pin Up Girls, in the Titan Mardi Gras parade this Sunday, in Houma, La. Thanks to the museum. They got it running yesterday and topped off with gas. I can drive it around town before the parade. They are paying me back for a Free music Gig I did for them!
https://www.regionalmilitarymuseum.com/
Les, Let me know if you make it to Houma ( 50 miles from New Orleans) and we can go eat some Good Cajun food!
Hey Bob,
Well, the New Orleans trip was cancelled this morning as I woke up sick... Not the flu I think as I am not running a fever but the "mother of all chest colds" so we didn't go... Heck of a way to celebrate my 72nd birthday!!!
Hoping to get down there some time this year again... I'll let you know if we do and maybe we can get together. for some good New Orleans nosh..
Nice looking Jeep - how about a few more pics when you have the time...
Sorry to hear that.
New Orleans is Crazy this time of year more than ever!
We stay out of New Orleans, only every now and then for a Gig.
We don't like it much! When we were young we would go there a lot.
Most People here do Not Mardi Gras in New Orleans.
Houma has a much better Mardi Gras!
Food in New Orleans is expensive and Not as good as here, because we know where to go in Houma!
Well off to get my Jeep for the day!
very cool pics Bob - would like to that some day... Weather warming here but I'm still pretty sick... Whatever this junk is has laid me pretty low... Going back to Doc next week for follow up...
Les
Posting Permissions
