I know this would be easier to understand if I posted pics but that’s not possible at this time.
I had to remove my fairing on my 2012 trike. Before putting the fairing back on the trike I was cleaning those hard to reach areas. I found something that I thought was odd so I checked my Honda Manual but didn’t come up with anything helpful.
On the right side of the trike a group of wires come from the frame area and runs to just above the radiator. Here there’s a female 7p grey connector. The male side of this connector runs to a nearby black box that says PBT however this male connector is disconnected from the female portion of the plug. The kicker is there is another male connector that’s attached to the female end with 3 wires coming out of it and it appears they are shorted to each other.
What is the black box (PBT). Would this be something to do with the trike kit?
I bought this trike used.