Before our upcoming summer trip I wanted to replace the heim joints on my panhard rod. To do this, removing the body is required.
There are only 8 bolts and some wires that need disconnecting.
Here are some photo's from yesterday-
...body sitting on some sawhorses...yeah, it's filthy, needs a good cleaning, and some wax.
Here you can see one end of the panhard rod, where the dealership sprayed some sort of lubricant that really attracted a lot of road dirt.
Panhard rod removed-
Panhard rod reinstalled with new heim joints.
The old heim joints had quite a bit of play in them, so it will be nice to ride it without that slack in them.
I also left the body off, sometime in the next few days I'll be mounting the video camera to the rear of the frame and taking some video to watch the 14" Trike Series Shocks in action while riding. Will post it up here when done.
Kevin