Rebel RT

[TomyJ]

-On hold again so I'll be back on the eScooter wiring for a couple of days,

[TomyJ]

Waiting a couple more days for the Battery, so to keep busy I wired the on/off switch and the external Batt charge terminal.

[TomyJ]

-Wiring back at it with new battery...

[TomyJ]

---The eScooter is off and running with the new batteries and wiring, one week for shake down then up for sale, But a neighbor with a bad hip wants first shot ($) at it... Back on the Trike and the gScooter on the side. EDIT: SOLD 11-02-2020

[TomyJ]

Need to fix the fuel problem with this than sell, 50MPH, Motorized Scooter (platform)according to the DMV, legal. Back to the Trike wiring...

[TomyJ]

One thing this Trike wiring has taught me is IF you are not in the mood, do something else because you'll F-up...- Rear running lights and foot brake light all dialed in, Please remember this building a reverse trike from scratch is all new to me so bare with me when I enjoy simple pleasures, AND wow I made it work!!! That's NOT what I tell my wife, speaking of her she would not drive the eScooter to speed again 25mph, she just wants a one speed bicycle and she's happy! SOOOOO! I ordered a 24" Tricycle 7 speed (she will not shift it" and soon a eBike kit for 48V 20Ah 1K Watts li ion Batts, I'll be hoping to put it together and sell to the local senior citizens, I know we can all use a little extra income...

[Jack Klarich]

Looks like a good job

[TomyJ]

Still waiting for wiring parts for the RT so here's another side job for the wife.-Here's the foundation for the 24" eTricycle. eBay and it comes 75% assembled, I think the hardest part was the Shimano 7 speed detailer and the chain, they did supply the chain breaker (aka installer) AND Don't ever forget the pedals are left and right hand threads. So we will be test riding it to make sure nothing goes wrong then order the front wheel eBike kit and the battery's. 1K Watt motor, 48 Volts, 20Ah Lithium Ion batteries, Ohhh Yeaaa!!!

[TomyJ]

-Lets see if just the junction box will work?

[TomyJ]

Now back to the wiring...

[TomyJ]

-Rear wires are finished, before I start on the front and taking off the gas tank, I'll try to start it? tomorrow?

[TomyJ]

Yea!!! Engine runs, Now on to the front wiring tomorrow, then fill and bleed rear brake...I love to pat myself on the back,

[LarryA]

Getting close to a ride! Looking forward to a video!

[TomyJ]

-Ohhhhh! Do I hate wiring, -Maybe this new tank will make up for it today, checking for petcock leaks, ready to install after the F****** wiring, Wife's got me on "HONEY DO" this week because of Xmas...-Damn it's getting cold in the "ManCave"

[TomyJ]

-Wow these 7" headlights look a lot better than the 5" one on top, now to wire it up and then the gas tank and fill bleed the rear master cylinder and brake caliper, THEN, THEN, let the good times roll, I will be the "REBELROUSER"...

[Gorilla]

look good can't wait for the test ride results

[TomyJ]

New tank installed and wires tucked under it, foot brake master cylinder filled and bled, NOW of all times there is a problem with the signals, my 2000 bike does not have LED lights, BUT I did put on new signal lights LED and they do not flash because of LED, used jumpers on old lights and they flash. HELP! What do I have to do to get them to flash???

[Jack Klarich]

New tank installed and wires tucked under it, foot brake master cylinder filled and bled, NOW of all times there is a problem with the signals, my 2000 bike does not have LED lights, BUT I did put on new signal lights LED and they do not flash because of LED, used jumpers on old lights and they flash. HELP! What do I have to do to get them to flash???

Led lights use low voltage. You will need a load equalizer to make them work.

Look here https://www.amazon.com/SYLVANIA-Equa...8609126&sr=8-3

[TomyJ]

Thank you Jack, You know I am lost with this wiring mess? Can I use this as one unit from the switch or one per light??? DAMN! I hate wiring,

[Jack Klarich]

Thank you Jack, You know I am lost with this wiring mess? Can I use this as one unit from the switch or one per light??? DAMN! I hate wiring,

I would say 1 per circuit