Rebel RT

[TomyJ]

With the correct Honda wiring diagram and a street rod wiring booklet, like Speedway sells, you should be all set. Take your time and it can be somewhat enjoyable.

Thank You Larry, I am hoping with the original harness it will be "PlugNplay" I started at the spark plugs and won't be using the idiot lights or speedo but will try to use the ignition switch, everything is close, I might have to raise the Battery? and from there it's 9 wires to the rear lights. Right now I just want to see the fit and mounts, so far so good?

[TomyJ]

eBay here again,-They were ordered for me but to small, in mockup, need more tilt?

[irondad01]

With the floor boards, maybe get your passenger to sit on the back and see what tilt feels best?

As for the wiring, the way to eat an elephant is one bite at a time. Slow and steady and you will get it. Good job so far.

[TomyJ]

What's a SuperBowl? Floor boards and wiring for me today, Got the LED brake and tail light working to the main harness, Oh, can't forget the bicycle riding on Sat and Sun mornings. Remember tonight is: 2020-02-02 20:20, wife wants photos with the clock...

[stacebg]

[QUOTE=TomyJ;729481]What's a SuperBowl? a super bowl is a big cereal bowl that goes with the big coffee cup leave it the beaver got stuck in

[TomyJ]

[QUOTE=stacebg;729616]

What's a SuperBowl? a super bowl is a big cereal bowl that goes with the big coffee cup leave it the beaver got stuck in

Now you are showing your age,OMG! I feel so old, Oh, that's right Ï am"

[stacebg]

[QUOTE=TomyJ;729871]

Now you are showing your age,OMG! I feel so old, Oh, that's right Ï am"

i wanted to post a pic of said cup but could copy the one i found

[TomyJ]

I ordered some longer floor boards and a 14mm x 100mm bolt, washer and lock nut for the shifting levers to frame. Wiring plug and play is getting me really close, had to cut and move a couple of brackets instead of my first choice of Batt location. EDIT: Feb. 06 Mockup of the new foot boards, design, in house (garage) material, and MUST be strong...

[TomyJ]

Started on the left floor board brackets for the front, shift linkage bolt should be here in a couple of days, Then to the right side and brake pedal and M/C,

[TomyJ]

These little things take up so much time and energy, lots of little brackets to make things work, -Wifey is still upset with it being so low, Will order the rear fender next week...

[grandpanystrom61]

You are at least getting things done with it. Looking good, and soon it will be all done. My wife is the opposite, seems she does all she can to keep me from getting things done with the trike, but I too hope to have it all done soon.

[TomyJ]

Tack welding batt box and rear floor board brackets, some of the wiring will be hid under the gas tank, - The gas tank tunnel is 3"+ wide, wow! Tomorrow will be to the welder for front floor board TIG welding brackets and machining...

[TomyJ]

Hiding some of the electrics in the tank tunnel, -

[TomyJ]

OK Trike is going back on the table for front floor boards mounting and to fix my mistakes in the front shock towers,

[TomyJ]

Maybe overkill?And RebelRouser is tabled again, Ordered the rear fender, takes 7 days to make it then ship. The fender is holding me back from making the fender (fiberglass) brace's and the lights. Need taller tires up front and shorter shock towers? EDIT: I just noticed the numbers in the date and time, crazy,

[Eggman]

Maybe overkill?And RebelRouser is tabled again, Ordered the rear fender, takes 7 days to make it then ship. The fender is holding me back from making the fender (fiberglass) brace's and the lights. Need taller tires up front and shorter shock towers? EDIT: I just noticed the numbers in the date and time, crazy,

Don't ask me about overkill, lol, the footboard extensions look fine to me.

Looking good, should be a fun ride!

[TomyJ]

FloorBoards in and mock up the shifter and foot brake,- Machinist is making the threaded M-14 2. square 1. x 1.25 bung for the shifter brace,

OMG! What about this winter weather across the States in Feb. Here it will be 77* today and tomorrow, :>(

[TomyJ]

Keeping busy between the shift linkage, foot brake, and now the rear axle spacer came in from the machinist, and still waiting for the rear fender and new tires up front.

[TomyJ]

If wifey is not happy, NO ONE IS HAPPY!!! So it's back to her eScooter, drilled the new mounts and wire holes, setting up the box for rubber ligning and spacers for the taper in the sides of the batteries, two will be on their sides because of proper seat heigth which will be on the top of the box.--

[TomyJ]

Just to bring you up to date, -Changing the shocks for a stiffer ride, Shift linkage is figured out need spacer made, Moved brake pedal inward of upper frame rail, looks and should work better. And now it is fender time, wow lots of trimming and locating, I hope to follow the radius of the outer rim, BUTT!!! this rim and tire looks like "WHEEL PORN"...