When I bought my trike I noticed there are marks on the exhaust from what would seem to be the soles of boots. Does anyone have a secret for cleaning these marks up?
When I bought my trike I noticed there are marks on the exhaust from what would seem to be the soles of boots. Does anyone have a secret for cleaning these marks up?
Windex works good also
Nuff Said," Were Burnin Daylight, Lets Ride"(Sober 37 years)
Current ride : 2021 FREEWHEELER M8, oldest ride 1960 FL
I've used Chrome polish with 0000 steel wool, just takes some time and not very much pressure. Best thing I ever did after a couple of weeks was to buy the Harley heel guard.
https://www.harley-davidson.com/stor...ard-heel-guard
2021 CVO TriGlide - Sunset Orange & Black
Life's journey is not to arrive at the grave in a well-preserved body, but to skid in sideways, totally worn out, shouting...Holy Sh!t What a ride!
I had that problem on my 15
The M8 exhaust runs a bit different, I have had NO boot marks in 16K miles
The bends on the rear pipe are different and moved back a bit along with the converter
Nuff Said," Were Burnin Daylight, Lets Ride"(Sober 37 years)
Current ride : 2021 FREEWHEELER M8, oldest ride 1960 FL
My mission in life is not merely to survive, but to thrive; and to do so with some passion, some compassion, some humor, and some style. – Maya Angelou
I am putting the heel guard on my wish list. I need to send the Wife God a link to said list as it is growing. I tried brake parts cleaner and steel wool. It took a little work but the marks came off. I really like the floor board extensions from DK Customs and the heel shift delete kits I installed today.
I would say proceed with caution on this one. I had a couple of small boot marks on my new 16 TG, from my boots. I tried the oven cleaner when the exhaust was hot. Not only did it not work, it created a even bigger mess. Long story short, I wish I would have just left it on there. I did get some results with very fine steel wool and a lot of elbow grease. Good luck.
Don't they make two kinds of oven cleaner? One that is used on hot surfaces and one on cold? This isn't my area of the house but I thought that was true at one time. But things do change and just haven't paid any attention since we got a self cleaning oven. I'm just thinking that if you used the cold stuff on a hot surface you could make a huge mess potentially. Just thinking out loud sorta here as to what may have caused your problem. I use a copper washer used on batteries to chip away burned on stuff myself, then chrome polish. Takes time but works.
The only reason some people are still alive is it's illegal to shoot them.
American Legion Rider
You're lucky. I did that once! NEVER ever again!! I didn't even use much pressure. Chrome never looked good again, had a slight haze. Metal on metal = not good.
Another vote for Easy Off oven cleaner. Spray it on and leave overnight = wipe off with a rag next morning. No sweat needed, no damage to chrome. Cover everything but the chrome - it'll take the paint off too.
Also used the "old" thick H-D boot removal gel for quick light jobs. Not the new crap....it's terrible.
IBA#61162
PATRIOT GUARD
USMC
I've used oven cleaner on all kinds of gook on my pipes, melted rainsuit, boot scrapes, etc., and it works great. Haven't had a lot of problem since I added DK footboard extenders though.
Dave
14 HD Tri Glide
H.O.G. Member
Had same problem every time I rode eventually melted part of my right boot heel.....Installed HD Heal guard (as already stated) and use EZ Off oven cleaner
(only takes a few mins to work with ordinary kitchen sink plastic scour/sponge)....now marks are a thing of the past!
Rub with a penny. comes right off, maybe it was a nickel.
2020 TriGlide Tahitian Teal aka (Hawaiian Hussy). Avon frt & Comfortred rear tires. ProAction frt & rear susp. RZ seat. DK floorboard extension & rear axle retainer kit with EBS, HD pull -back bars. Custom Dynamics front turn signals & Vent grill. All ,HD "Edge Cut " accessories.
I always had good luck with a product called Road Rub. It was a dry packed white powder in a white plastic container similar to a small rollup deodorant container. It worked great for me if you didn't use too much pressure. I still have two containers of it, but I understand they have been out of business for several years. It was made by Vanlark Inc in Anna, IL. I don't have a problem with heel marks with the floorboard extensions anyway. The oven cleaner sounds like a good fix.
16 TGU Mysterious Red / Velocity Red. FM Ceramic Head pipe and FM E-Series tunable exhaust. PV Target Tune-AT WB Tuner. DK Outlaw 606 AC with EBS, Ward’s FCS fans. DK Custom Oil filter/Cooler relocation kit, Comfort Lift and 14 inch shocks. DK tank lift, wind deflectors, floorboard extenders, and tour pak relocator. Chrome TGU wheels. Bad Ass Lights tail lights. Lighted controls and Krome Works 2+2 narrow handle bars.