150 Most Recent Posts

Thread AuthorPostersPost AuthorForumThread/Post Link
Aging Gracefully1Aging GracefullyHarley Freewheeler /...switching Tri-Glide for Road Glide ...
agapsdiver5trike ladyHarley Freewheeler /...Completed Project: 2024 RG3 added T...
David35754WarpedThe Gun EnthusiastJust Gun Memes
agapsdiver5GorillaHarley Freewheeler /...Completed Project: 2024 RG3 added T...
Gfitzz536ROAD DOGGeneral Harley Chatengine oil transfer to primary side...
Gfitzz536Gfitzz53General Harley Chatengine oil transfer to primary side...
Amputee552ultrafxrHarley Tri GlideGas tank removal to replace handleb...
Rawhideken5ROAD DOGHarley Tri Glide2024 Tri glide
Amputee552Amputee55Harley Tri GlideGas tank removal to replace handleb...
Rawhideken5Peter A.Harley Tri Glide2024 Tri glide
Rawhideken5RawhidekenHarley Tri Glide2024 Tri glide
agapsdiver5agapsdiverHarley Freewheeler /...Completed Project: 2024 RG3 added T...
David35754rhino 2The Gun EnthusiastJust Gun Memes
David35754SullyThe Gun EnthusiastJust Gun Memes
SHARKDIVER2SHARKDIVERGeneral Harley Chatsuper shox
Rawhideken5Old Road DogHarley Tri Glide2024 Tri glide
Mykneesbehurtin9NotgrownupHarley Tri GlideTri Glide Reverse Motor
MDO100Freewheeling_Dude!Harley Freewheeler /...What Did You Do To Your Freewheeler...
Rawhideken10ol' schoolNew Member Introduct...Hi all new to this site ! hope I do...
consitter75Papa ZookGeneral DiscussionLate nighters---unite!!!
consitter75rhino 2General DiscussionLate nighters---unite!!!
Rawhideken10scuzziNew Member Introduct...Hi all new to this site ! hope I do...
consitter75Marc HGeneral DiscussionLate nighters---unite!!!
consitter751dn5upGeneral DiscussionLate nighters---unite!!!
Rawhideken10Marc HNew Member Introduct...Hi all new to this site ! hope I do...
Rawhideken10trike ladyNew Member Introduct...Hi all new to this site ! hope I do...
David35754Uncle FesterThe Gun EnthusiastJust Gun Memes
Mykneesbehurtin9rhino 2Harley Tri GlideTri Glide Reverse Motor
agapsdiver5RKplus10Harley Freewheeler /...Completed Project: 2024 RG3 added T...
Rawhideken10hardwickbvNew Member Introduct...Hi all new to this site ! hope I do...
Rawhideken10SullyNew Member Introduct...Hi all new to this site ! hope I do...
Rawhideken10Uncle FesterNew Member Introduct...Hi all new to this site ! hope I do...
agapsdiver5Papa ZookHarley Freewheeler /...Completed Project: 2024 RG3 added T...
agapsdiver5agapsdiverHarley Freewheeler /...Completed Project: 2024 RG3 added T...
agapsdiver5agapsdiverHarley Freewheeler /...Completed Project: 2024 RG3 added T...
agapsdiver5agapsdiverHarley Freewheeler /...Completed Project: 2024 RG3 added T...
DK Custom Products362ultrafxrHarley Tri GlideWhat did you do to Your Tri-Glide T...
Rawhideken10rhino 2New Member Introduct...Hi all new to this site ! hope I do...
DK Custom Products362ultrafxrHarley Tri GlideWhat did you do to Your Tri-Glide T...
Rawhideken5ROAD DOGHarley Tri Glide2024 Tri glide
Rawhideken5TrampasHarley Tri Glide2024 Tri glide
Rawhideken5RawhidekenHarley Tri Glide2024 Tri glide
Rawhideken5ROAD DOGHarley Tri Glide2024 Tri glide
JerseyGirlRider9Papa ZookHarley Freewheeler /...Road Glide 3 - Is this normal?
JerseyGirlRider9RKplus10Harley Freewheeler /...Road Glide 3 - Is this normal?
Rawhideken10Papa ZookNew Member Introduct...Hi all new to this site ! hope I do...
Rawhideken10RawhidekenNew Member Introduct...Hi all new to this site ! hope I do...
Rawhideken5RawhidekenHarley Tri Glide2024 Tri glide
Rawhideken10Papa ZookNew Member Introduct...Hi all new to this site ! hope I do...
GPz11002GPz1100General DiscussionHonda Valkyrie Conversions
Gfitzz536ROAD DOGGeneral Harley Chatengine oil transfer to primary side...
Rawhideken10RawhidekenNew Member Introduct...Hi all new to this site ! hope I do...
Sully1SullyGeneral DiscussionHAPPY St. PATRICKS DAY
Gfitzz536Gfitzz53General Harley Chatengine oil transfer to primary side...
GPz11009hardwickbvNew Member Introduct...I'm Back
DrCrazyTrain12hardwickbvNew Member Introduct...Introduction
Hogman196tpb857Harley Tri GlideCobra # 6256 Pro chamber headpipes
ISP-FL2NotgrownupHarley Tri GlideMaybe Not Correct Fitment
Mykneesbehurtin9ISP-FLHarley Tri GlideTri Glide Reverse Motor
ISP-FL2ISP-FLHarley Tri GlideMaybe Not Correct Fitment
Bouncer9ISP-FLHarley Tri GlideDrive Belt Replacement Time
Gfitzz536ROAD DOGGeneral Harley Chatengine oil transfer to primary side...
Gfitzz536ROAD DOGGeneral Harley Chatengine oil transfer to primary side...
Gfitzz536Gfitzz53General Harley Chatengine oil transfer to primary side...
Bouncer9NotgrownupHarley Tri GlideDrive Belt Replacement Time
ISP-FL2NotgrownupHarley Tri GlideMaybe Not Correct Fitment
consitter751dn5upGeneral DiscussionLate nighters---unite!!!
JerseyGirlRider9NotgrownupHarley Freewheeler /...Road Glide 3 - Is this normal?
Chief80138NotgrownupHarley Tri GlideHow many miles on your Triglide?
GPz11009NotgrownupNew Member Introduct...I'm Back
SHARKDIVER2NotgrownupGeneral Harley Chatsuper shox
Notgrownup3NotgrownupHarley Tri GlideClutch lever not touching the safet...
DK Custom Products362NotgrownupHarley Tri GlideWhat did you do to Your Tri-Glide T...
GPz11009hogmemberisoldNew Member Introduct...I'm Back
GPz11002Papa ZookGeneral DiscussionHonda Valkyrie Conversions
GPz11009trike ladyNew Member Introduct...I'm Back
consitter75consitterGeneral DiscussionLate nighters---unite!!!
GPz11009SullyNew Member Introduct...I'm Back
Chief80138RKplus10Harley Tri GlideHow many miles on your Triglide?
Oldrodder2Marc HHarley Trike Convers...Pingel electric shift
14TG214TGHarley Tri GlideValve stem clearance
Oldrodder4Papa ZookHarley Trike Convers...2006 CVO with M/T Gladiator with el...
GPz11009Marc HNew Member Introduct...I'm Back
14TG2Papa ZookHarley Tri GlideValve stem clearance
14TG214TGHarley Tri GlideValve stem clearance
Chief80138rhino 2Harley Tri GlideHow many miles on your Triglide?
GPz11009rhino 2New Member Introduct...I'm Back
consitter75ZammyGeneral DiscussionLate nighters---unite!!!
GPz11009ZammyNew Member Introduct...I'm Back
GPz11009GPz1100New Member Introduct...I'm Back
Gfitzz536ROAD DOGGeneral Harley Chatengine oil transfer to primary side...
GPz11002GPz1100General DiscussionHonda Valkyrie Conversions
JerseyGirlRider9JerseyGirlRiderHarley Freewheeler /...Road Glide 3 - Is this normal?
Chief80138Artpe54Harley Tri GlideHow many miles on your Triglide?
DK Custom Products362NotgrownupHarley Tri GlideWhat did you do to Your Tri-Glide T...
Notgrownup3NotgrownupHarley Tri GlideClutch lever not touching the safet...
SHARKDIVER2SHARKDIVERGeneral Harley Chatsuper shox
Rogue16Rogue1Harley Tri GlidePowder coating
Oldrodder2OldrodderHarley Trike Convers...Pingel electric shift
consitter75trike ladyGeneral DiscussionLate nighters---unite!!!
Papa Zook96Phu CatBBQ, Grilling, Cooki...Whats for supper?
Noodles1076Phu CatHarley Freewheeler /...Battery ??
Rogue16David792Harley Tri GlidePowder coating
Gfitzz536Gfitzz53General Harley Chatengine oil transfer to primary side...
Gfitzz536Gfitzz53General Harley Chatengine oil transfer to primary side...
Papa Zook96SullyBBQ, Grilling, Cooki...Whats for supper?
DK Custom Products362Jd1aHarley Tri GlideWhat did you do to Your Tri-Glide T...
Gfitzz536Dan SCGeneral Harley Chatengine oil transfer to primary side...
Gfitzz536ROAD DOGGeneral Harley Chatengine oil transfer to primary side...
ISP-FL10cycle7447General Harley ChatDealer Charging For CC usage
Burnerboy4BurnerboyRoadsmith Trikes
...
I finally got my TRIKE out of hiber...
Noodles1076Old Road DogHarley Freewheeler /...Battery ??
DrCrazyTrain12CCjonNew Member Introduct...Introduction
ISP-FL10rhino 2General Harley ChatDealer Charging For CC usage
consitter75rhino 2General DiscussionLate nighters---unite!!!
DK Custom Products362Jarhead82Harley Tri GlideWhat did you do to Your Tri-Glide T...
Papa Zook2GorillaGeneral DiscussionNew Dedicated Motor Trike, Hannigan...
Rogue1614TGHarley Tri GlidePowder coating
Noodles1076Papa ZookHarley Freewheeler /...Battery ??
Burnerboy4tourmanRoadsmith Trikes
...
I finally got my TRIKE out of hiber...
GPz11002Papa ZookGeneral DiscussionHonda Valkyrie Conversions
Noodles1076WindyOneHarley Freewheeler /...Battery ??
consitter75trike ladyGeneral DiscussionLate nighters---unite!!!
Noodles1076Noodles107Harley Freewheeler /...Battery ??
Rogue16JTJerseyHarley Tri GlidePowder coating
ISP-FL10BurnerboyGeneral Harley ChatDealer Charging For CC usage
Gfitzz536MykneesbehurtinGeneral Harley Chatengine oil transfer to primary side...
GPz11002GPz1100General DiscussionHonda Valkyrie Conversions
ISP-FL10My TurnGeneral Harley ChatDealer Charging For CC usage
ISP-FL10cycle7447General Harley ChatDealer Charging For CC usage
Gfitzz536Gfitzz53General Harley Chatengine oil transfer to primary side...
Gfitzz536ROAD DOGGeneral Harley Chatengine oil transfer to primary side...
Noodles1076ROAD DOGHarley Freewheeler /...Battery ??
ISP-FL10ROAD DOGGeneral Harley ChatDealer Charging For CC usage
ISP-FL10JTJerseyGeneral Harley ChatDealer Charging For CC usage
Papa Zook2Papa ZookGeneral DiscussionNew Dedicated Motor Trike, Hannigan...
Oldrodder4OldrodderHarley Trike Convers...2006 CVO with M/T Gladiator with el...
JerseyGirlRider9JerseyGirlRiderHarley Freewheeler /...Road Glide 3 - Is this normal?
ISP-FL10KrazeehorseGeneral Harley ChatDealer Charging For CC usage
Papa Zook2Papa ZookGeneral DiscussionNew Dedicated Motor Trike, Hannigan...
Noodles1076Noodles107Harley Freewheeler /...Battery ??
Noodles1076Papa ZookHarley Freewheeler /...Battery ??
Noodles1076Noodles107Harley Freewheeler /...Battery ??
JerseyGirlRider9Papa ZookHarley Freewheeler /...Road Glide 3 - Is this normal?
Rogue16Rogue1Harley Tri GlidePowder coating
Rogue16PanheadSteveHarley Tri GlidePowder coating
ISP-FL10rhino 2General Harley ChatDealer Charging For CC usage
Gfitzz536rhino 2General Harley Chatengine oil transfer to primary side...
JerseyGirlRider9Phu CatHarley Freewheeler /...Road Glide 3 - Is this normal?
Baldy_543MickHonda TrikesOkay on Cinco De Mayo
Likes Likes:  1
Thanks Thanks:  0
Results 1 to 19 of 19

Thread: Brake rotor?

  1. #1
    20+ Posts
    Join Date
    May 2017
    Location
    Newburgh, IN 47630
    Posts
    21
    Thanks
    0
    Thanked 0 Times in 0 Posts

    Default Brake rotor?

    What is the acceptable run out for a brake rotor? OK, I rechecked my numbers and the run out on my left rotor is 0.16 and the right rotor is 0.05. This is with the rotors on the bike and a dial indicator clamped to the bike.

  2. Roadsmith banner
  3. #2
    13500+ Posts FuzzyWuzHe's Avatar
    Join Date
    Dec 2014
    Location
    Grand Junction, Co. USA
    Posts
    13,721
    Thanks
    0
    Thanked 0 Times in 0 Posts

    Default

    I'm not sure of the rotor specs, but, I'd think both are out of spec. 0.160" and 0.050" is a lot in my humble opinion ... I would suspect to see like 0.006" max.

    Disclaimer: my numbers would be on a test bench or rotor lathe, not just jacking up the trike and spinning the hub and rotor. lots of other possible "plays" in the later.

  4. #3
    20+ Posts
    Join Date
    May 2017
    Location
    Newburgh, IN 47630
    Posts
    21
    Thanks
    0
    Thanked 0 Times in 0 Posts

    Default

    I need to recheck my numbers I may be off.

  5. #4
    20+ Posts
    Join Date
    May 2017
    Location
    Newburgh, IN 47630
    Posts
    21
    Thanks
    0
    Thanked 0 Times in 0 Posts

    Default

    Back to the drawing board I need to recheck my numbers.

  6. #5
    10+ Posts oolddog's Avatar
    Join Date
    Apr 2013
    Location
    Hickory Withe, TN USA
    Posts
    12
    Thanks
    0
    Thanked 1 Time in 1 Post

    Default Where can you get the Roadsmith rotors turned?

    Quote Originally Posted by old willie View Post
    What is the acceptable run out for a brake rotor? OK, I rechecked my numbers and the run out on my left rotor is 0.16 and the right rotor is 0.05. This is with the rotors on the bike and a dial indicator clamped to the bike.
    I have a 2012 Goldwing with 2013 ROADSMITH HCS trike kit. I have been unable to find a shop anywhere in Memphis, TN that has the capability to turn the rotors. They all told me that they must be turned "on the vehicle" and they had no way to handle a trike. I even went to the VW dealer and talked to the shop service foreman. Same story.

  7. #6
    2000+ Posts trikeman's Avatar
    Join Date
    Oct 2010
    Location
    Jackson Tn. Madison Co.
    Posts
    2,072
    Thanks
    0
    Thanked 0 Times in 0 Posts

    Default

    Have you compared price of new rotors versus turning old rotors?

  8. #7
    2000+ Posts trikeman's Avatar
    Join Date
    Oct 2010
    Location
    Jackson Tn. Madison Co.
    Posts
    2,072
    Thanks
    0
    Thanked 0 Times in 0 Posts

    Default

    I’m in Jackson Tn. Lots of tire and brake repair shops with lathe machine for turning rotors. Do you have a odd design that makes it difficult to turn. Not familiar with RS Trikes.

  9. #8
    10+ Posts oolddog's Avatar
    Join Date
    Apr 2013
    Location
    Hickory Withe, TN USA
    Posts
    12
    Thanks
    0
    Thanked 1 Time in 1 Post

    Default New Rotors and pads cost

    Quote Originally Posted by trikeman View Post
    Have you compared price of new rotors versus turning old rotors?
    At 29,500 miles I replaced the rotors & pads. Got them from ROADSMITH. $384.13! I'll just drive it and try tp enjoy the surges as I stop. I have 61,000+ on it now.

  10. Roadsmith banner
  11. #9
    2000+ Posts trikeman's Avatar
    Join Date
    Oct 2010
    Location
    Jackson Tn. Madison Co.
    Posts
    2,072
    Thanks
    0
    Thanked 0 Times in 0 Posts

    Default

    • shock:




    Are they silver and gold plated?

  12. #10
    18500+ Posts
    Tech Contributor
    Gold Club Member
    Jack Klarich's Avatar
    Join Date
    Oct 2016
    Location
    Jax, Fla USA
    Posts
    18,501
    Thanks
    0
    Thanked 0 Times in 0 Posts

    Default

    Quote Originally Posted by oolddog View Post
    I have a 2012 Goldwing with 2013 ROADSMITH HCS trike kit. I have been unable to find a shop anywhere in Memphis, TN that has the capability to turn the rotors. They all told me that they must be turned "on the vehicle" and they had no way to handle a trike. I even went to the VW dealer and talked to the shop service foreman. Same story.
    Quote Originally Posted by trikeman View Post
    I’m in Jackson Tn. Lots of tire and brake repair shops with lathe machine for turning rotors. Do you have a odd design that makes it difficult to turn. Not familiar with RS Trikes.
    You are going to find it harder to find a tech willing to turn rotors for a bike

    There are TOO many variables with run out to take a job like this

    IMO, and I have turned a few bike rotors, it just aint worth it now days, not to mention the liability factor

    If you have TOO much run out already you are on the losing end, replace the rotors and be safe and happy

    one IMO way to correct the warped rotor is surface grind them, how ever this could cost as much as new rotors, never mind the run out, stacked tolerances and minimum machine to spec These are JMO I aint trying to scare any one, brakes are serious business, it does not matter what you ride you best be able to stop safely
    Nuff Said," Were Burnin Daylight, Lets Ride"(Sober 37 years)
    Current ride : 2021 FREEWHEELER M8, oldest ride 1960 FL

  13. #11
    10+ Posts oolddog's Avatar
    Join Date
    Apr 2013
    Location
    Hickory Withe, TN USA
    Posts
    12
    Thanks
    0
    Thanked 1 Time in 1 Post

    Default I agree.....

    Quote Originally Posted by Jack Klarich View Post
    You are going to find it harder to find a tech willing to turn rotors for a bike

    There are TOO many variables with run out to take a job like this

    IMO, and I have turned a few bike rotors, it just aint worth it now days, not to mention the liability factor

    If you have TOO much run out already you are on the losing end, replace the rotors and be safe and happy

    one IMO way to correct the warped rotor is surface grind them, how ever this could cost as much as new rotors, never mind the run out, stacked tolerances and minimum machine to spec These are JMO I aint trying to scare any one, brakes are serious business, it does not matter what you ride you best be able to stop safely
    Thanks for the reply!

  14. #12
    10+ Posts oolddog's Avatar
    Join Date
    Apr 2013
    Location
    Hickory Withe, TN USA
    Posts
    12
    Thanks
    0
    Thanked 1 Time in 1 Post

    Default Precious metals....

    Quote Originally Posted by trikeman View Post

    • shock:




    Are they silver and gold plated?
    LOLOL! They should of been!!

  15. #13
    3250+ Posts bikerbillone's Avatar
    Join Date
    Sep 2012
    Location
    Lakeland, FL
    Posts
    3,061
    Thanks
    0
    Thanked 10 Times in 8 Posts

    Default

    Quote Originally Posted by oolddog View Post
    I have a 2012 Goldwing with 2013 ROADSMITH HCS trike kit. I have been unable to find a shop anywhere in Memphis, TN that has the capability to turn the rotors. They all told me that they must be turned "on the vehicle" and they had no way to handle a trike. I even went to the VW dealer and talked to the shop service foreman. Same story.
    I had the same problem, mine warped out of specs, so little it could not be measured to determine which one it was, I knew it was the left, but no way to prove it. No one in my world to turn the rotors, so had to bite the silver bullet and pay up, it was painful, but the slow/stop surge was getting awful, driving me nuts. Gentlemen, that's the price we pay.

  16. Roadsmith banner
  17. #14
    1000+ Posts mhgoldwing's Avatar
    Join Date
    Mar 2011
    Location
    mountain home,ar. USA
    Posts
    1,168
    Thanks
    0
    Thanked 0 Times in 0 Posts

    Default

    Quote Originally Posted by bikerbillone View Post
    I had the same problem, mine warped out of specs, so little it could not be measured to determine which one it was, I knew it was the left, but no way to prove it. No one in my world to turn the rotors, so had to bite the silver bullet and pay up, it was painful, but the slow/stop surge was getting awful, driving me nuts. Gentlemen, that's the price we pay.
    I have same problem. Wish Roadsmith would design and use a modern braking system. I am living with mine for now.
    Wing with Roadsmith kit, Traxxion Ak20 cartridges and Accuride System.

    07 ST 1300 for two-wheeled fun!

  18. #15
    20+ Posts
    Join Date
    May 2017
    Location
    Newburgh, IN 47630
    Posts
    21
    Thanks
    0
    Thanked 0 Times in 0 Posts

    Default

    I pulled mine and took them to a local machine shop. they turned them and now I stop nice and smooth. These rotors are not like bike rotors and they can be turned. I confirmed this with Roadsmith.

  19. #16
    2500+ Posts Gold Rush's Avatar
    Join Date
    May 2011
    Location
    San Angelo
    Posts
    2,664
    Thanks
    0
    Thanked 5 Times in 5 Posts

    Default

    I believe the key to getting these rotors trued it finding a shop willing to try. At the very worst they fail and you lost some time trying to save rather than replace them.

    Both of my discs warped and I called all the "PROS" in town that were suppose to be so great. Got a whole lot of "NO we can't do those". One of the guys at Advanced Auto told me about an old gentleman to go see. Sure enough, he had an old lathe with all sorts of adapters. $10 per disc and smooth as glass!!!

    This same gentleman has since done all four wheels on my 1974 Charger SE Brougham I've been restoring for a couple years now.
    Jerry "Gold Rush" (aka: "SPOOK") San Angelo, TX
    2015 GL1800/Roadsmith HTS1800
    TOI - IBA #23804 (SS1K & BB1.5K)
    I'm like an old race horse..... I can still run the race -- Just ache more at the finish line and need more rest between outings.

  20. #17
    3250+ Posts bikerbillone's Avatar
    Join Date
    Sep 2012
    Location
    Lakeland, FL
    Posts
    3,061
    Thanks
    0
    Thanked 10 Times in 8 Posts

    Default

    Holy Christmas, wish this old school guy had been in Florida, somewhere, anywhere, I'd have been on his door step.

  21. #18
    18500+ Posts
    Tech Contributor
    Gold Club Member
    Jack Klarich's Avatar
    Join Date
    Oct 2016
    Location
    Jax, Fla USA
    Posts
    18,501
    Thanks
    0
    Thanked 0 Times in 0 Posts

    Default

    Quote Originally Posted by old willie View Post
    I pulled mine and took them to a local machine shop. they turned them and now I stop nice and smooth. These rotors are not like bike rotors and they can be turned. I confirmed this with Roadsmith.
    Any rotor can be turned, the questions are are you checking and duplicating rotor runout before and after?

    If not you will end up with a problem for sure.

    Also, be very careful to index the rear rotors ( clean ALL mating surfaces including the hat area to the hub) If you do not your run out will continue to be stacked and not correct. This will lead to a good looking rotor, BUT the run out will cause vibration, noise and rapid wear of the pads. JMO from years of brake work and teaching brakes 101
    Nuff Said," Were Burnin Daylight, Lets Ride"(Sober 37 years)
    Current ride : 2021 FREEWHEELER M8, oldest ride 1960 FL

  22. #19
    1+ Posts
    Join Date
    Apr 2023
    Location
    Mentor Ohio USA
    Posts
    3
    Thanks
    0
    Thanked 0 Times in 0 Posts

    Default Turning rotors

    Most machine shops won’t touch rotors. Too hard. I’ve had mine resurfaced on a flywheel grinder. It worked great so long as you stay in spec on thickness. Just my opinion.

Similar Threads

  1. Roadsmith HDT Brake rotor
    By tinker in forum Roadsmith Trikes
    Owners Forum
    Replies: 5
    Last Post: 04-03-2023, 01:23 PM
  2. After market rear brake rotor
    By vettriker68 in forum Harley Trike Conversions
    Replies: 7
    Last Post: 09-01-2016, 11:11 AM
  3. CSC cobra rear brake rotor
    By turboman1354 in forum Honda Trikes
    Replies: 6
    Last Post: 11-14-2014, 06:49 PM
  4. Rear brake rotor
    By GARYD in forum Harley Trike Conversions
    Replies: 20
    Last Post: 10-16-2012, 06:48 PM
  5. warped front brake rotor---not happy with HDMC
    By pcmikey in forum Harley Tri Glide
    Replies: 1
    Last Post: 10-16-2011, 06:15 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •