Here's a pic finally
Here's a pic finally
Does it have a rigid rear ?
2012 Triglide Piaggio MP3 500 to get groceries 1991 FLHS as back up
"Better to have it and not need it than need it and not have it !"
Tiffany, Olive, Daisy, “The Three Musketeers” together again.
It has a solid axle supported by 4 bearings that's cut in half. Left wheel turns with the motor, right wheel has the disc for the brakes.
I'm thinking maybe I will install a bicycle shock that goes from the Triple Tree to the frame on the right side. That way I might be able to overcome a right turn at slow speeds with force on the handlebars but it may be enough to offset the constant right hand push under acceleration
2012 Triglide Piaggio MP3 500 to get groceries 1991 FLHS as back up
"Better to have it and not need it than need it and not have it !"
Tiffany, Olive, Daisy, “The Three Musketeers” together again.
You cannot use a live axle on a trike it'll go in a straight line when you try to turn. I know from previous experience. My only other option would have been a differential. The only reason I live axle works on the old school off-road trikes is because the tires slide over the top of the dirt. That won't cut it on the street
here's a pic of the rear end
What’s the power plant ? Does it have a CVT ?
2012 Triglide Piaggio MP3 500 to get groceries 1991 FLHS as back up
"Better to have it and not need it than need it and not have it !"
Tiffany, Olive, Daisy, “The Three Musketeers” together again.
250cc ninja motor
Interesting thing, would not be street legal in NY. Only for RV use here. Good luck.
2012 Triglide Piaggio MP3 500 to get groceries 1991 FLHS as back up
"Better to have it and not need it than need it and not have it !"
Tiffany, Olive, Daisy, “The Three Musketeers” together again.
Well ,in Nevada I already start off with a bike that's been street legal and registered with the VIN number on the neck and then after that I just make sure I have all the street legal requirements turn signals, mirrors, brake light, tail light, horn, 17 digit VIN number speedometer. After that it's all good nobody bothers me
a damper will not help you at all see my previous comment
not trying to belittle you or your design...just hate to see you or anyone get hurt.. but this is a pretty dangerous setup, with that set up,, chances are slim to none you will ever get rid of the pull .. and the reverse is going to happen when you try to brake... and with only one wheel braking that wheel is going to want to skid (ask me how i know)
which will make a stopping ability..very unsafe. pretty sure one wheel brake is not legal in any state
although you say nobody bothers you i would bet dollars to doughnuts if you had to go to a state inspection they would not let you drive it home
also my guess would be if there was ever a claim against your insurance the ins company would not cover the claim ... we all know they are looking for a reason not to pay... when the adjuster comes they get a look at the one wheel drive and the one wheel brake .. doubt they will even think about covering..
again no disrespect intended just hate to see anyone get in physical or financial trouble
especially if i have encountered similar thing just like to pass it on
stace
That is a pretty creative set up
I have 2 questions
1 Are those rear tires speed rated
2 Are there bearings in the rear wheels or bushings?
Nuff Said," Were Burnin Daylight, Lets Ride"(Sober 37 years)
Current ride : 2021 FREEWHEELER M8, oldest ride 1960 FL
What I meant by one wheel brake is only one wheel in the back has a brake on there I still have the front brake. I've used both brakes. It stops in a straight line in a hurry. Yes I do agree with you about a state inspection but around here cops just want to know you have a license, registration, and insurance. I don't have full coverage insurance so if something happens I don't expect Insurance Company to pay full out.
LOL I'm sure those tires are not rated even though they say (dot). And there are no bearings in my wheels the wheels attached to a solid axle that turns in two bearings that are sealed bolted to hangers. I will look for a better wheel setup that's better suited for Street applications however I took the trike on a 20-mile trip at freeway speeds doing at least 70. The wheels held up fine but I would like to get something better Suited.
Bearing pic
Yep, I get it. It's a calculated risk that I'm willing to take. But I'm not stupid I usually take every precaution when building a vehicle to make sure I stay alive and others stay alive.
Update... turns out if you mount a heavy duty spring to the left part of the forks and bring it to the frame it will help overcome the right hand steering. It's way more manageable now vs no spring. I built a slide adjuster to fine tune the spring tension. I also had my rear wheels balanced at the tire shop. Makes a world of difference.
yup an then when u hit the brakes the spring helps u pull to the right even worse