Victory XC CSC Questions

[Salty]

2011, been triked for 5 years, on my third pulley BTW

Bike has very poor upper end power. CSC uses Super Trapp pipes with max amount of disks so can’t add more

Are there any other pipes that fit ?

Also there are no grab handles to help passenger from sliding in corners ?

Thank you

[Iowavicrider]

2011, been triked for 5 years, on my third pulley BTW

Bike has very poor upper end power. CSC uses Super Trapp pipes with max amount of disks so can’t add more

Are there any other pipes that fit ?

Also there are no grab handles to help passenger from sliding in corners ?

Thank you

Hi Salty! We have a 2012 Victory Cross Country with a CSC conversion. Last year we had trouble with the pulley and it took our wrench a lot of time to figure out what that awful squeak was at slow speeds. It was the reverse shaft rubbing on the pulls.

A little lock-time and arm strength ended the squeak for our trike. We have Vance & Hines on our trike and they sound great. A little deeper than the stock CSC mufflers and a lot more bark! I think the only passenger grab handles that you can get, must be hand crafted.

We decided to go with the REVCO arm rest, but be warned, they fit the Victory tour pack, not the CSC tour pack. You will have to also modify the brackets, but they will fit and your passenger will be appreciative!

[Salty]

Is it possible to get a pic or model of the Vance n Hines pipes?

I have CSC tour oak so that answers that

Thank you

If easier I can send you an email adress for pics , of pipes from underneath?

[Iowavicrider]

Is it possible to get a pic or model of the Vance n Hines pipes?

I have CSC tour oak so that answers that

Thank you

If easier I can send you an email adress for pics , of pipes from underneath?

I will crawl underneath and take some pictures for you tomorrow.

[Salty]

Thank you

[joem]

Salty if you'd like I can send you a picture of grab handles I used on my 2015 victory with CSC kit.

[Salty]

Thank you! That would be awesome

salty01@telus.net

[joem]

OK I sent you a picture by email.

[Salty]

Joe, email sent back!

Awesome thank you

[drakerjd]

Hello, I'm late to the party so if this thread has played out, apologies. Have you tried any after-market fuel processors such as Lloydz Gen 3, specifically made for the Vic? How about their open-end air kit? Adjustable timing gear? Looking for performance pipes, and them presumably baffling them off for more torque might not be the way to go. I personally like the sound of the super trapps over the custom cut and glassed pipes I had on my XC while it was two-wheeled.

On the grab handles, can you post the photo of them if you'd received initially from joem? I've been thinking of going to a bike body shop locally to see if they can weld a frame underneath the CSC body, and that will then allow the use of after market grab handles. Seems CSC could have come up with something along those lines....

Thanks,

-Bob

2011, been triked for 5 years, on my third pulley BTW

Bike has very poor upper end power. CSC uses Super Trapp pipes with max amount of disks so can’t add more

Are there any other pipes that fit ?

Also there are no grab handles to help passenger from sliding in corners ?

Thank you

[rhino 2]

Hello, I'm late to the party so if this thread has played out, apologies. Have you tried any after-market fuel processors such as Lloydz Gen 3, specifically made for the Vic? How about their open-end air kit? Adjustable timing gear? Looking for performance pipes, and them presumably baffling them off for more torque might not be the way to go. I personally like the sound of the super trapps over the custom cut and glassed pipes I had on my XC while it was two-wheeled.

On the grab handles, can you post the photo of them if you'd received initially from joem? I've been thinking of going to a bike body shop locally to see if they can weld a frame underneath the CSC body, and that will then allow the use of after market grab handles. Seems CSC could have come up with something along those lines....

Thanks,

-Bob

Bob............Welcome .......

[Salty]

Finally got an appt with a trike dealer 4 hours away

We’re stripping out the PCV and auto tune and tuning the ecu itself

He also now has a dyno machine! So hoping for more get up n go at upper end

Still looking fir muffler options? Someone told me they have same setup with V& H pipes, wish I knew who and what pipes

Thx all!

[Ben_D]

I’m experiencing lousy gas mileage. 28-30mpg! Pipes are sooty, and I loaded what should be a lean map on my Power Commander. No evidence of leaks, either. @Iowavicrider, can you send me pics of your V&H pipes? kayben@cox.net. Thanks.

[California Sidecar]

I’m experiencing lousy gas mileage. 28-30mpg! Pipes are sooty, and I loaded what should be a lean map on my Power Commander. No evidence of leaks, either. @Iowavicrider, can you send me pics of your V&H pipes? kayben@cox.net. Thanks.

Remember too that CSC's techs are only a phone call away! 1-800-824-1523

[Salty]

I didn’t have any luck with CDC tech support

In fact I was told, victory’s lose a lot of power when triked , just the way it is

Trike is at a good shop currently and discs in super Trapps pulled out ... sounds great.

There was so much soot in them it was like they were plugged

Tuning next

[Salty]

Not CDC. I meant CSC

[Ben_D]

I didn’t have any luck with CDC tech support

In fact I was told, victory’s lose a lot of power when triked , just the way it is

Trike is at a good shop currently and discs in super Trapps pulled out ... sounds great.

There was so much soot in them it was like they were plugged

Tuning next

I wonder if a slightly taller profile rear tire would improve the mileage?

[Ben_D]

Salty if you'd like I can send you a picture of grab handles I used on my 2015 victory with CSC kit.

If it’s not too much trouble, Joem, could you send me the same pics, please? Thank you. kayben@cox.net