150 Most Recent Posts

Thread AuthorPostersPost AuthorForumThread/Post Link
TomyJ7TomyJHome Built TrikesShenanigans
dthorn8dthornHarley Tri Glide2024 Tri Glide front axle nut torqu...
dthorn8rhino 2Harley Tri Glide2024 Tri Glide front axle nut torqu...
MDO101rhino 2Harley Freewheeler /...What Did You Do To Your Freewheeler...
TomyJ7Jack KlarichHome Built TrikesShenanigans
Vin4Jack KlarichHarley Tri GlideCold Engine Revs High When Starting
MDO101Jack KlarichHarley Freewheeler /...What Did You Do To Your Freewheeler...
dthorn8Rogue1Harley Tri Glide2024 Tri Glide front axle nut torqu...
MDO101DK Custom ProductsHarley Freewheeler /...What Did You Do To Your Freewheeler...
diferg3Motorcycle MikeChampion TrikeChampion irs banging noise on bumps
Kneesinbreeze5My TurnHarley Freewheeler /...Hiway pegs without installing crash...
MDO101LD-OrdieHarley Freewheeler /...What Did You Do To Your Freewheeler...
diferg3difergChampion TrikeChampion irs banging noise on bumps
Rogue15Rogue1Harley Tri GlideOil pressure gauge.
dthorn8Dan SCHarley Tri Glide2024 Tri Glide front axle nut torqu...
Vin4Dan SCHarley Tri GlideCold Engine Revs High When Starting
Rogue15Dan SCHarley Tri GlideOil pressure gauge.
HDUSA113ol' schoolNew Member Introduct...New to Trike Talk
diferg11ol' schoolNew Member Introduct...Hello from Southeast Georgia U.S.A
Rogue15Rogue1Harley Tri GlideOil pressure gauge.
scuzzi4scuzziHarley Tri GlideTri Glide extended reach seat
DK Custom Products362New Orleans KevinHarley Tri GlideWhat did you do to Your Tri-Glide T...
Vin4rhino 2Harley Tri GlideCold Engine Revs High When Starting
diferg3Marc HChampion TrikeChampion irs banging noise on bumps
Vin4VinHarley Tri GlideCold Engine Revs High When Starting
Frisco5Marc HCalifornia Sidecar T...Side pod door open signal
TomyJ7TomyJHome Built TrikesShenanigans
diferg3Motorcycle MikeChampion TrikeChampion irs banging noise on bumps
diferg3difergChampion TrikeChampion irs banging noise on bumps
diferg11Uncle FesterNew Member Introduct...Hello from Southeast Georgia U.S.A
JohnnyVDA13Uncle FesterNew Member Introduct...Hello I am from Belgium
jef_nik20002jef_nik2000Lehman TrikeMonarch 2 center cap removal proced...
jef_nik20002Papa ZookLehman TrikeMonarch 2 center cap removal proced...
jef_nik20002jef_nik2000Lehman TrikeMonarch 2 center cap removal proced...
jef_nik20002Papa ZookLehman TrikeMonarch 2 center cap removal proced...
Tritek4stancotreauLehman TrikeAvoid buying a Lehman?
Rogue15Jack KlarichHarley Tri GlideOil pressure gauge.
jef_nik20002jef_nik2000Lehman TrikeMonarch 2 center cap removal proced...
Tritek4Papa ZookLehman TrikeAvoid buying a Lehman?
gfaltersack8DK Custom ProductsHarley Tri GlideDK Customs remote oil filter kit in...
Kneesinbreeze5Noodles107Harley Freewheeler /...Hiway pegs without installing crash...
Rogue15Old Road DogHarley Tri GlideOil pressure gauge.
Tritek4TritekLehman TrikeAvoid buying a Lehman?
Burnerboy11rhino 2Can Am Spyder Trike...How many of you ride a Can Am spyde...
JohnnyVDA13Phu CatNew Member Introduct...Hello I am from Belgium
ZZMACH114BrokenBackJackHarley Tri GlideNew Member Hello from NH
diferg11BrokenBackJackNew Member Introduct...Hello from Southeast Georgia U.S.A
JohnnyVDA13BrokenBackJackNew Member Introduct...Hello I am from Belgium
JohnnyVDA13Papa ZookNew Member Introduct...Hello I am from Belgium
Frisco5FriscoCalifornia Sidecar T...Side pod door open signal
ctdair9Jd1aHarley Tri GlideHot Rotors After New Pads
Frisco5FriscoCalifornia Sidecar T...Side pod door open signal
JohnnyVDA13Jack KlarichNew Member Introduct...Hello I am from Belgium
diferg11Jack KlarichNew Member Introduct...Hello from Southeast Georgia U.S.A
ZZMACH114SullyHarley Tri GlideNew Member Hello from NH
diferg11SullyNew Member Introduct...Hello from Southeast Georgia U.S.A
Kneesinbreeze5pigfoot63Harley Freewheeler /...Hiway pegs without installing crash...
AriNV14KneesinbreezeNew Member Introduct...New to trike
Burnerboy11KneesinbreezeCan Am Spyder Trike...How many of you ride a Can Am spyde...
TXFIRE766BurnerboyHonda TrikesNew to Trikes and needing a convers...
smokey_mountain2BurnerboyAccessoriesJ&S Moto conversion to Trike Li...
Frisco5BurnerboyCalifornia Sidecar T...Side pod door open signal
Frisco5ol' schoolCalifornia Sidecar T...Side pod door open signal
ZZMACH114trike ladyHarley Tri GlideNew Member Hello from NH
JohnnyVDA13trike ladyNew Member Introduct...Hello I am from Belgium
diferg11trike ladyNew Member Introduct...Hello from Southeast Georgia U.S.A
diferg11rhino 2New Member Introduct...Hello from Southeast Georgia U.S.A
diferg11GorillaNew Member Introduct...Hello from Southeast Georgia U.S.A
ZZMACH114Marc HHarley Tri GlideNew Member Hello from NH
Frisco5Marc HCalifornia Sidecar T...Side pod door open signal
DK Custom Products3621dn5upHarley Tri GlideWhat did you do to Your Tri-Glide T...
diferg11Marc HNew Member Introduct...Hello from Southeast Georgia U.S.A
diferg11ZammyNew Member Introduct...Hello from Southeast Georgia U.S.A
Bloke10Marc HNew Member Introduct...Hello from Uttoxeter UK
JohnnyVDA13Marc HNew Member Introduct...Hello I am from Belgium
Kneesinbreeze5ZammyHarley Freewheeler /...Hiway pegs without installing crash...
diferg11difergNew Member Introduct...Hello from Southeast Georgia U.S.A
Phill Griggs2ZammyTrike TravelPIE-PIE & PIE
DK Custom Products362ZammyHarley Tri GlideWhat did you do to Your Tri-Glide T...
Bloke10ZammyNew Member Introduct...Hello from Uttoxeter UK
JohnnyVDA13ZammyNew Member Introduct...Hello I am from Belgium
Frisco5rhino 2California Sidecar T...Side pod door open signal
Frisco5FriscoCalifornia Sidecar T...Side pod door open signal
Rogue15rhino 2Harley Tri GlideOil pressure gauge.
JohnnyVDA13hardwickbvNew Member Introduct...Hello I am from Belgium
Rogue15Rogue1Harley Tri GlideOil pressure gauge.
ZZMACH114hardwickbvHarley Tri GlideNew Member Hello from NH
Kneesinbreeze5KneesinbreezeHarley Freewheeler /...Hiway pegs without installing crash...
Rogue15rhino 2Harley Tri GlideOil pressure gauge.
ctdair1ctdairHarley Tri GlideFixed Switch
Rogue15Rogue1Harley Tri GlideOil pressure gauge.
Rogue15Old Road DogHarley Tri GlideOil pressure gauge.
Davep13GorillaNew Member Introduct...Hello from the mountains
ZZMACH114GorillaHarley Tri GlideNew Member Hello from NH
HDUSA113GorillaNew Member Introduct...New to Trike Talk
JohnnyVDA13GorillaNew Member Introduct...Hello I am from Belgium
Bloke10GorillaNew Member Introduct...Hello from Uttoxeter UK
Sunman7GoldWingrGregHonda TrikesF1 Warning Light
ZZMACH11ZZMACH1Harley Tri GlideRinehart VS Vance & Hines for M...
DK Custom Products362rhino 2Harley Tri GlideWhat did you do to Your Tri-Glide T...
Bloke10rhino 2New Member Introduct...Hello from Uttoxeter UK
JohnnyVDA13rhino 2New Member Introduct...Hello I am from Belgium
JohnnyVDA13ol' schoolNew Member Introduct...Hello I am from Belgium
Rogue15Rogue1Harley Tri GlideOil pressure gauge.
JohnnyVDA13JohnnyVDANew Member Introduct...Hello I am from Belgium
Bloke10Jack KlarichNew Member Introduct...Hello from Uttoxeter UK
Bloke10SullyNew Member Introduct...Hello from Uttoxeter UK
Bloke10ol' schoolNew Member Introduct...Hello from Uttoxeter UK
Bloke10hardwickbvNew Member Introduct...Hello from Uttoxeter UK
Bloke10trike ladyNew Member Introduct...Hello from Uttoxeter UK
Burnerboy11BurnerboyCan Am Spyder Trike...How many of you ride a Can Am spyde...
Phill Griggs2Phill GriggsTrike TravelPIE-PIE & PIE
ZZMACH13Longbeard71Harley Tri GlideLooking for Dynajet Power Vision mo...
DK Custom Products3621dn5upHarley Tri GlideWhat did you do to Your Tri-Glide T...
Bloke10BlokeNew Member Introduct...Hello from Uttoxeter UK
Papa Zook2Jack KlarichHarley Tri Glide2024 Harley Trikes Lineup - Laidlaw...
ZZMACH12Jack KlarichHarley Tri GlideElectric Fans on 2014 Tri Glide
ZZMACH13Jack KlarichHarley Tri GlideLooking for Dynajet Power Vision mo...
Davep6Jack KlarichHarley Tri GlideTRI GLIDE AIR FILTER QUESTION
MDO101Jack KlarichHarley Freewheeler /...What Did You Do To Your Freewheeler...
Smitty9013Marc HSidecar ForumSmall crack down the rabbit hole
HDUSA113Marc HNew Member Introduct...New to Trike Talk
DK Custom Products362rhino 2Harley Tri GlideWhat did you do to Your Tri-Glide T...
HDUSA113ZammyNew Member Introduct...New to Trike Talk
Oldman-TriGlide10ZammyHarley Tri GlideEnclosed Trailer Size
Smitty9013ZammySidecar ForumSmall crack down the rabbit hole
TomyJ7TomyJHome Built TrikesShenanigans
HDUSA113Uncle FesterNew Member Introduct...New to Trike Talk
ZZMACH114Uncle FesterHarley Tri GlideNew Member Hello from NH
ZZMACH114stancotreauHarley Tri GlideNew Member Hello from NH
Davep6rhino 2Harley Tri GlideTRI GLIDE AIR FILTER QUESTION
Davep6DavepHarley Tri GlideTRI GLIDE AIR FILTER QUESTION
Smitty9013Smitty901Sidecar ForumSmall crack down the rabbit hole
ZZMACH114TrampasHarley Tri GlideNew Member Hello from NH
Oldman-TriGlide10CasperHarley Tri GlideEnclosed Trailer Size
HDUSA113Jack KlarichNew Member Introduct...New to Trike Talk
ZZMACH114Jack KlarichHarley Tri GlideNew Member Hello from NH
ZZMACH114Bill J. from AustinHarley Tri GlideNew Member Hello from NH
Bill J. from Austin3Bill J. from AustinHarley Freewheeler /...16" front rim?
Bill J. from Austin3Bill J. from AustinHarley Freewheeler /...16" front rim?
ZZMACH114rhino 2Harley Tri GlideNew Member Hello from NH
ZZMACH114DCR2013Harley Tri GlideNew Member Hello from NH
Bill J. from Austin3RKplus10Harley Freewheeler /...16" front rim?
Bill J. from Austin3Papa ZookHarley Freewheeler /...16" front rim?
ZZMACH13ZZMACH1Harley Tri GlideLooking for Dynajet Power Vision mo...
Bill J. from Austin3Bill J. from AustinHarley Freewheeler /...16" front rim?
HDUSA113cycle7447New Member Introduct...New to Trike Talk
HDUSA113hardwickbvNew Member Introduct...New to Trike Talk
ZZMACH114ZZMACH1Harley Tri GlideNew Member Hello from NH
ZZMACH12ZZMACH1Harley Tri GlideElectric Fans on 2014 Tri Glide
Likes Likes:  61
Thanks Thanks:  6
Page 2 of 6 FirstFirst 1 2 3 4 5 6 LastLast
Results 21 to 40 of 117

Thread: VANDERHALL: Debut of the Vanderhall Speedster

  1. #21
    40+ Posts Sandyken's Avatar
    Join Date
    Dec 2018
    Location
    Sanford, MI, USA
    Posts
    42

    Default

    I found that Vanderhall announces early to inform and build interest. Patience is hard, but required. They are still a small company with huge dreams. They are just starting to move into the new factory where the Carmel will be built. It is phase 1 of a multi year project to expand to 1M sq ft. Doubt that Carmel will be out before bike week.

    I've heard some estimates that the roof and a/c will be less than $7K. Besides the new models listed on the website, they are expanding into Europe and will be at the Brussels Auto Show. I am amazed at their growth. They have at least doubled production every year since 2015.

    When Sandy and I first heard of Vanderhall in Dec 2016, we placed a deposit on a Venice. We eventually purchased a Laguna and applied our deposit to it 18 months later. If you are interested in Carmel, I suggest you place a deposit to get in line. Vanderhall will contact you to determine what path you want to take. Deposits are fully refundable, they just buy a place in line and get the conversation started.

    I don't gain anything from Vanderhall sales, I just try to be a positive ambassador for them. Sometimes it's just a leap of faith.
    Ken
    "It's a Good Life"

  2. #22
    40+ Posts Sandyken's Avatar
    Join Date
    Dec 2018
    Location
    Sanford, MI, USA
    Posts
    42

    Question

    Eye candy!

    Vanderhall Carmel videos from the AIM expo in Vegas Oct 18

    First is the Broze unit with stock interior



    Second is Silver with heavily optioned red interior.



    Both are preproduction and may be slightly different than production. Neither appear to have a/c or tops. They do have modified windshield mounts to accommodate the top. Search YouTube for Vanderhall Carmel for a few more videos.
    Last edited by Sandyken; 12-17-2018 at 11:25 AM. Reason: Fix video link
    Ken
    "It's a Good Life"

  3. #23
    1000+ Posts tomg's Avatar
    Join Date
    Oct 2009
    Location
    Titusville, Florida
    Posts
    1,137

    Default

    Thanks again Ken, I'm close but if they would just come out and say that we could order with accessories of choice and not be charged twice for items we don't want or need, I'd order today!! Also at Biketoberfest, their vehicles were discounted so there is room to negotiate! Paying sticker price wouldn't be as bad if you could have accessories in with the deal depending on how many and related cost of course. It's just frustrating being teased with what would probably be my last trike/autocycle/3 wheeled vehicle or whever the states agree to call it and not being able to get all the information directly from the factory. Even the dealers don't have the info so I'm reluctant to plop down money without knowing at least the approximate cost involved. Tom

  4. #24
    40+ Posts Sandyken's Avatar
    Join Date
    Dec 2018
    Location
    Sanford, MI, USA
    Posts
    42

    Default

    The price for what you want is always with the dealer. At major events dealers may offer specials if you're willing to wait. We did. I have never had luck with finding what I wanted on the lot. Wrong color, wrong options, wrong price. It's your money you should get what you want. Most dealers want to sell inventory on hand and haven't taken the time required to fully research future products. Call some different dealers and see who is willing to work with you on creating your dream vehicle. It will not be cheap! I doubt that Vanderhall has even released price info yet besides MSRP of $39,950. Hot new models are seldom discounted heavily.
    Ken
    "It's a Good Life"

  5. #25
    1000+ Posts tomg's Avatar
    Join Date
    Oct 2009
    Location
    Titusville, Florida
    Posts
    1,137

    Default

    Quote Originally Posted by Sandyken View Post
    The price for what you want is always with the dealer. At major events dealers may offer specials if you're willing to wait. We did. I have never had luck with finding what I wanted on the lot. Wrong color, wrong options, wrong price. It's your money you should get what you want. Most dealers want to sell inventory on hand and haven't taken the time required to fully research future products. Call some different dealers and see who is willing to work with you on creating your dream vehicle. It will not be cheap! I doubt that Vanderhall has even released price info yet besides MSRP of $39,950. Hot new models are seldom discounted heavily.
    The hang tags had about a 4g event discount and I think the sticker was but a bit more than 32g. Could be wrong but close! I can wait a bit to save at least that on a 30g vehicle and I'd be looking at mid 40s vehicle. Tom

  6. #26
    1000+ Posts tomg's Avatar
    Join Date
    Oct 2009
    Location
    Titusville, Florida
    Posts
    1,137

    Default

    Name:  20190730_071919.jpg
Views: 518
Size:  643.8 KBThe wait is over and it was delivered last Thursday nite. The vehicle is so new the insurance company didn't have any info on it so they had to have the underwriters get the vehicle added to their system which took until Monday late. Tomg

  7. #27
    1000+ Posts tomg's Avatar
    Join Date
    Oct 2009
    Location
    Titusville, Florida
    Posts
    1,137

    Default

    Name:  20190730_071858.jpg
Views: 412
Size:  434.7 KB Don't know how to get this rotated? And for some reason I can only load one at a time? Tomg

  8. #28
    750+ Posts
    Join Date
    Jan 2010
    Location
    east windsor ct
    Posts
    790

    Default

    just curious.... what is the draw here? i agree with to each their own but i dont even see a resemblance to a motorcycle here.... once the bars are gone it seems closer to a car that lost a wheel a Miata is only about 1/2 the price

  9. #29
    100000 + Posts
    Gold Club Member
    rhino 2's Avatar
    Join Date
    Oct 2011
    Location
    Utopia New Jersey USA..
    Posts
    100,060

    Default

    Quote Originally Posted by tomg View Post
    The hang tags had about a 4g event discount and I think the sticker was but a bit more than 32g. Could be wrong but close! I can wait a bit to save at least that on a 30g vehicle and I'd be looking at mid 40s vehicle. Tom
    32K......Minus......4K...........I just priced one 39,950 $ And thats not out the door...
    Sometimes a Cigar is Just a Cigar.....
    2019 Tri-Glide.......

  10. #30
    600+ Posts TomyJ's Avatar
    Join Date
    May 2016
    Location
    Hemet, Ca. USA
    Posts
    642

    Default Vanderhall Venice-Laguna

    Name:  vanderhall-venice.jpg
Views: 409
Size:  431.6 KBVeniceName:  vanderhall-laguna.jpg
Views: 402
Size:  503.6 KBLaguna, With roof and rear fender @ Motor1.com I like!
    JakeJacobsen@Pinterest.com

  11. #31
    3250+ Posts bikerbillone's Avatar
    Join Date
    Sep 2012
    Location
    Lakeland, FL
    Posts
    3,018

    Default

    tomg posts #26 & 27, and what a beauty it is, worth the wait for sure. Ride it like you stole it, congratulations.

  12. #32
    1000+ Posts tomg's Avatar
    Join Date
    Oct 2009
    Location
    Titusville, Florida
    Posts
    1,137

    Default

    Quote Originally Posted by bikerbillone View Post
    tomg posts #26 & 27, and what a beauty it is, worth the wait for sure. Ride it like you stole it, congratulations.
    Thank you, they are supposed to ship the top to me direct and still waiting to hear when the trailer hitch will be available. First trip will probably be to Maggie Valley in a few weeks. Tomg

  13. #33
    10000+ Posts
    TrikeTalk Founder
    Papa Zook's Avatar
    Join Date
    Dec 2007
    Location
    Conroe, Texas
    Posts
    10,493

    Default

    Quote Originally Posted by tomg View Post
    Name:  20190730_071919.jpg
Views: 518
Size:  643.8 KBThe wait is over and it was delivered last Thursday nite. The vehicle is so new the insurance company didn't have any info on it so they had to have the underwriters get the vehicle added to their system which took until Monday late. Tomg
    You coming to Maggie Valley?

    I may have to take a ride in this...

  14. #34
    TOI - South Dakota pmar6004's Avatar
    Join Date
    Mar 2010
    Location
    Watertown, SD, USA
    Posts
    870

    Thumbs up CONGRATS...!

    Quote Originally Posted by tomg View Post
    Name:  20190730_071919.jpg
Views: 518
Size:  643.8 KBThe wait is over and it was delivered last Thursday nite. The vehicle is so new the insurance company didn't have any info on it so they had to have the underwriters get the vehicle added to their system which took until Monday late. Tomg
    Tomg,

    Congratulations on the purchase of Vanderhall Carmel. Although your Carmel color appears it be black, it actually is their Poseidon Blue, correct? As you know from my previous posts, I'm very interested in the Carmel and I'm leaning towards the red Carmel GT. I'm having a bit of hesitation with justifying the extra $4K, where one gets a leather interior, paddle shifters and glossy black rims, but it's the Ruby Red Metallic color that I like, over what colors offered for the Carmel basic, Poseidon Blue and Vintage Silver. What was the turn around time you waited from when you pre-ordered to when your Carmel was delivered?

    I convinced 3 "Vanderhallers" to attend the Deadwood 3 Wheeler Rally this year. More said that they plan on attending next year and I hope that you're one of them. I plan to be hosting a TT/T.O.I. Meet & Greet/Ride/Luncheon event again during the rally, but this time in my Carmel.

    Again, congratulations. Many safe miles...!

    pmar6004


    Name:  Vanderhall-Carmel-high-front-RED.png
Views: 308
Size:  180.5 KBName:  Vanderhall-Carmel-side-rear-RED-capshade.png
Views: 298
Size:  133.1 KB
    "Life is not measured by the number of breaths we take,
    but rather by the number of things that take our breath away."
    2020 Vanderhall Carmel GT #014
    marquardt6004@gmail.com
    Paul Marquardt

  15. #35
    1000+ Posts tomg's Avatar
    Join Date
    Oct 2009
    Location
    Titusville, Florida
    Posts
    1,137

    Default

    Yes it is blue, dark dark blue. I actually think I might have picked another color and now they only list silver and the dark blue so what's up with that? The top, cruise control and dead pedal plate came standard which were all items I would have had to order so I thankful I saved there. I have the black rims on my Durango SRT and had black graphics put on the sides but I actually like the rims that came on the Carmel. I wish they would have left the cup holders by the shifter as where they are, they are pretty useless, very shallow and narrow. I ordered back in December but the wait time was longer as they weren't producing them then. I can't imagine you would wait near as long as I did. So far they have not taken my ideas of folding seats and a lockable cover for the storage area yet. One really needs the trailer hitch as the storage area is very limited as well as difficult to use. Tomg

  16. #36
    3250+ Posts bikerbillone's Avatar
    Join Date
    Sep 2012
    Location
    Lakeland, FL
    Posts
    3,018

    Default

    Was wondering about storage, looks like almost zero to none, so gotta have that trailer it seems for any kind of trip. Agree about the folding seats, would have been a nice convenience, not trying to pick it 'cause ain't nothing perfect as the saying goes. That bad boy sure looks good in the picture, so it's hard to pick 'good looking', sleek and stealth are the words that come to mind. I do not see three wheelers anywhere that look as good. Only time will tell the quality of the machine.

  17. #37
    1000+ Posts tomg's Avatar
    Join Date
    Oct 2009
    Location
    Titusville, Florida
    Posts
    1,137

    Default

    Storage is very limited to behind the seats which only slide forward several inches. Access is difficult to be kind! They need to have folding seats for access and a lockable cover. Even with those mods, you will still need a small trailer for luggage, folding chairs and space to carry a cover when parked at night for rain. That's why I keep looking for the release of the trailer hitch! Tomg

  18. #38
    3250+ Posts bikerbillone's Avatar
    Join Date
    Sep 2012
    Location
    Lakeland, FL
    Posts
    3,018

    Default

    Tom, sure hope Vanderhall comes through for you and future buyers. You have been totally patient in your wait, common sense, if Vanderhall wants to expand their buyer base they will have to get moving on a hitch. Surely not that complicated, if they can design the machine, the hitch should not be an issue.

  19. #39
    1000+ Posts tomg's Avatar
    Join Date
    Oct 2009
    Location
    Titusville, Florida
    Posts
    1,137

    Default

    Quote Originally Posted by bikerbillone View Post
    Tom, sure hope Vanderhall comes through for you and future buyers. You have been totally patient in your wait, common sense, if Vanderhall wants to expand their buyer base they will have to get moving on a hitch. Surely not that complicated, if they can design the machine, the hitch should not be an issue.
    I was told a couple of months ago that the redesign was complete but obviously getting it into production with a vendor they want is something else. Same thing with the top! Hopefully they will be available sooner than later. Tomg

  20. #40
    3250+ Posts bikerbillone's Avatar
    Join Date
    Sep 2012
    Location
    Lakeland, FL
    Posts
    3,018

    Default

    Yes, it's reality that production is a huge hurdle even for a good concept, here, patience is a virtue. Us riders, including me, over look this detail, including those things that break and have to be fixed, think it's called 'tunnel vision', if we ain't riding we ain't in happy place.

Page 2 of 6 FirstFirst 1 2 3 4 5 6 LastLast

Similar Threads

  1. VANDERHALL: Vanderhall Forum
    By Brummbar in forum Vanderhall
    Replies: 36
    Last Post: 01-11-2023, 11:41 AM
  2. VANDERHALL: Downloadable Owner’s Manuals (PDF)
    By Brummbar in forum Vanderhall
    Replies: 9
    Last Post: 04-28-2022, 11:21 PM
  3. Vanderhall: Demo days?
    By Brummbar in forum Vanderhall
    Replies: 5
    Last Post: 12-12-2018, 04:10 PM
  4. Vanderhall Forum
    By Brummbar in forum Vanderhall
    Replies: 2
    Last Post: 06-20-2018, 09:59 AM
  5. Ever hear of a Vanderhall Venice?
    By peteg59 in forum Vanderhall
    Replies: 22
    Last Post: 06-04-2018, 07:24 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •