What do yo think about hose down mid line of air filter,exit to front of motor to the rear of oil pressure and rear brake switch and hang sort of behind floor board frame mount
What do yo think about hose down mid line of air filter,exit to front of motor to the rear of oil pressure and rear brake switch and hang sort of behind floor board frame mount
From the threads ive been reading it seems unanimous that a breather is a necessity. 22000 on 15 fw (live in n.e. Pa maybe get four months riding) no problems with blow by. Then again i change my oil every 4000 and wash and re oil the air filter at the same time.
Is it vented back into the heads only because of e.p.a. regs?
As a kid in the late 60's early 70's there was a saying that the carter 4 bbl came with a pull pin on the side like a grenade because eventually it would self destruct. I guess hd has has built in self destruct items
Pulling back thru intake. I saw the video either on fmh or dk. or somewhere. Showed in detail the routing of the oil through all the ports and channels in the heads. Can't locate video now!
Vintage 09' Vivid Black, Boyesen X force intake, DK Customs DIY external breather, PV tuner, Mighty Mite love Jugs,Titanium Wrapped Header pipe, Khrome Werks 2+2 Wide Sweepers, DK 2" tank lift deluxe, Air Deflectors, Rear Bumper, Fender Chrome trim, Kuri. Rear lights, 9" LRS recurve flat top wind screen, LED headlight and spots, Hubcaps rear wheels
Is it possible to use stock air filter and stock cover with dk breather systems
Last edited by Tucci; 10-27-2018 at 08:23 PM. Reason: More info needed
Were you able to use the stock air cleaner cover. What type support plate did you use and did you need to get a different filter
10-22 on any responses, I've decided instead of trying to make it fit, I bought a vance/hines vo2 naked air cleaner kit, breather bolt system, and chrome catch can. It will take me less time hooking this up than trying to fabricate something.