I got tired of the sloppy stock shifter joints and had an in store credit so I picked this up today
Likes: 2,712
Thanks: 249
I got tired of the sloppy stock shifter joints and had an in store credit so I picked this up today
Nuff Said," Were Burnin Daylight, Lets Ride"(Sober 37 years)
Current ride : 2021 FREEWHEELER M8, oldest ride 1960 FL
Excellent way to start off the new year.Originally Posted by Jack Klarich
New Year Day got above 50 degrees so I took a quick ride.
MikeP
2017 Billet Silver FLRT - Wife's
2022 Vivid Black FXST - Mine
Good riding today
After changing the shift linkage ( I have always used heim joints with the factory rod)
Now , after changing the entire linkage ( a first for me) the clunk is all but a thing of the past. Up shifts and down no longer clunk, I might miss that NOT
The instructions ( from HD ) are wrong, so I did it my way( H D wants the front part put on the outside), this caused a bind, also the chrome cover ( cheap at best) does not fit the arm on the transmission. Not a deal breaker as I used an in store credit
Nuff Said," Were Burnin Daylight, Lets Ride"(Sober 37 years)
Current ride : 2021 FREEWHEELER M8, oldest ride 1960 FL
That sounds great no clunking. I will want to go that route. Do you have any install tips on any thing that you did. Maybe a few pics if you could. Thanks.
CaptJim
No pictures yet, if you read the instructions and follow them for your year trike you will not have any problems
THere are many knock offs on the market cheaper, but IMO cheaper is just that. Chose wisely Here is a link, click on details for instruction page
https://www.harley-davidson.com/us/e...E&gclsrc=aw.ds
Nuff Said," Were Burnin Daylight, Lets Ride"(Sober 37 years)
Current ride : 2021 FREEWHEELER M8, oldest ride 1960 FL
https://www.harley-davidson.com/us/e...E&gclsrc=aw.ds
Hope this loads, installed HD shifter linkage on 2021 Freewheeler
Nuff Said," Were Burnin Daylight, Lets Ride"(Sober 37 years)
Current ride : 2021 FREEWHEELER M8, oldest ride 1960 FL
I looked at the trikes today while pulling the snowblower out of the garage.
MikeP
2017 Billet Silver FLRT - Wife's
2022 Vivid Black FXST - Mine
Nice pic and that looks a lot better than the original and more rugged. Less Flex.
I have always changed all my shifters to heim joint rod ends. They will last a lifetime and not leave you stranded like the cheap factory joints
This time I opted for the solid linkage seen here with heim joints. I had an in store credit to use
You can get heim joints for your stock HD rod here
https://www.bungking.com/heim-joints/
or D K Customs here
https://www.dkcustomproducts.com/pai...dk-hj-pair.htm
Nuff Said," Were Burnin Daylight, Lets Ride"(Sober 37 years)
Current ride : 2021 FREEWHEELER M8, oldest ride 1960 FL
Great something else to spend money on.
MikeP
2017 Billet Silver FLRT - Wife's
2022 Vivid Black FXST - Mine
I installed a heel shift today, I dunno why I waited so long
A note, the box says parts are made in USA, China and Singapore
The lever is pretty light weight, chrome is good. Hardware is good quality, I am OK with this
Note, the pinch bolts are now thru bolts with self locking nuts, a big improvement IMO
Nuff Said," Were Burnin Daylight, Lets Ride"(Sober 37 years)
Current ride : 2021 FREEWHEELER M8, oldest ride 1960 FL
Paid a chilly visit to my sleeping beauty still in hibernation for almost 6 weeks now. Did I ever mention that I hate cold weather?
I had a Dr visit today, it was colder than normal here this morning@32 degrees when I left the house
I had my chaps on so it was not too bad
It was nice to have my heel shifter on my 21 Freewheeler, it got a work out today
Nuff Said," Were Burnin Daylight, Lets Ride"(Sober 37 years)
Current ride : 2021 FREEWHEELER M8, oldest ride 1960 FL
You need more stuff in that garage john , I can help ya with thatPaid a chilly visit to my sleeping beauty still in hibernation for almost 6 weeks now. Did I ever mention that I hate cold weather?
2012 Triglide Piaggio MP3 500 to get groceries 1991 FLHS as back up
"Better to have it and not need it than need it and not have it !"
Tiffany, Olive, Daisy, “The Three Musketeers” together again.
LOL! I've got to get rid of some of the stuff in there. I actually do a lot of shop work out there. If I were to turn the camera around you'd see my workbench and storage cabinets where my gun stock and recoil pad work gets done. I test fire some small caliber stuff out there as well. Nothing big, don't want to upset the neighbors too muchYou need more stuff in that garage john , I can help ya with that
Yeah I hear y'all are getting some brisk weather down there. Talking to my buddy in Port Charlotte yesterday and it was a high of 50. Did I mention I hate winter?I had a Dr visit today, it was colder than normal here this morning@32 degrees when I left the house I had my chaps on so it was not too bad It was nice to have my heel shifter on my 21 Freewheeler, it got a work out today
Yup, we almost always get a good cold snap in January, but Bike Week is coming and that means Spring timeYeah I hear y'all are getting some brisk weather down there. Talking to my buddy in Port Charlotte yesterday and it was a high of 50. Did I mention I hate winter?
Nuff Said," Were Burnin Daylight, Lets Ride"(Sober 37 years)
Current ride : 2021 FREEWHEELER M8, oldest ride 1960 FL
Temperature got up to 12 today.
MikeP
2017 Billet Silver FLRT - Wife's
2022 Vivid Black FXST - Mine
Today I added extended shift pegs to my Freewheeler, I hate the wimpy stock ones
J & P catalog shows no fit for 2021 FLRT, I questioned that since I already put that same part number on the front already. Their tech department said they could not yet confirm that, so I rode down to the Daytona store, bought the peg and put it on in the parking lot.
I had the tech come out to see the job so they can confirm the fitment, lets see how long it takes them to do it.
Here is the peg, part #
J&P Part #: 634-213
Nuff Said," Were Burnin Daylight, Lets Ride"(Sober 37 years)
Current ride : 2021 FREEWHEELER M8, oldest ride 1960 FL
Posting Permissions
