What Did You Do To Your Freewheeler Today?

[rhino 2]

Little concerned about that price.

Cheap at twice that price..........

[Jack Klarich]

Cheap at twice that price..........

Cheap chrome to boot

There is a reason Amazon has a lot of these parts for a low price

[Jack Klarich]

Replaced all 4 plugs today, the RS plugs were loose from the factory

[Triterrier]

Cleaned it up after last weeks long overnight ride. Ceramic wax, polish chrome and all. No ride today it appeared a storm was lurking....... It looks good now though!

[Noodles107]

Cleaned it up after last weeks long overnight ride. Ceramic wax, polish chrome and all. No ride today it appeared a storm was lurking....... It looks good now though!

Looks great Mike ... you should throw a couple of snapshots up in the "Got Pics" thread

[Noodles107]

Added this really cool HD Clock this morning ... loved it when I saw it in the posts from priell3 and JTJersey. Thought it looked great and the quality is exactly what I expected from HD. So for versatility it also worked out right for me. priell3 mounted his right side low, JT inside the fairing and I put it left side high. Love it ...

[Noodles107]

Also picked up these new shades from HD ... On sale for $31.50 from the "Twin Eyewear" Collection. All 3 colors on sale. Great bang for the buck imo

[JTJersey]

Also picked up these new shades from HD ... On sale for $31.50 from the "Twin Eyewear" Collection. All 3 colors on sale. Great bang for the buck imo

If I could get my prescription in them I might go for them.

[Jack Klarich]

I got tired of having to get a screwdriver to take my seat off, you got to remove the seat to adjust the rear shocks, anyway I am cheap so I found a furniture eye bolt I had laying around

The threads were right so I sawed it off and chased the threads, painted it gloss black

Now I can turn it on and off by hand, I will get my wife to snap a pic I( I am camera challenged)

I found a pic online that looks very similar to what I started with

[JTJersey]

I got tired of having to get a screwdriver to take my seat off, you got to remove the seat to adjust the rear shocks, anyway I am cheap so I found a furniture eye bolt I had laying around. The threads were right so I sawed it off and chased the threads, painted it gloss black. Now I can turn it on and off by hand, I will get my wife to snap a pic I( I am camera challenged)

I found a pic online that looks very similar to what I started with

My only concern is making it a bit easier for thieves to take your seat. I did get a couple of these over the winter looking for tie down points for gear with my sissy bar attached. Strapping to the bar itself doesn't work very well, especially at speed. Was going to paint them black, but found something that worked out a bit better that was already powder coated black and didn't interfere with mounting the sissy bar.

[Jack Klarich]

My only concern is making it a bit easier for thieves to take your seat. I did get a couple of these over the winter looking for tie down points for gear with my sissy bar attached. Strapping to the bar itself doesn't work very well, especially at speed. Was going to paint them black, but found something that worked out a bit better that was already powder coated black and didn't interfere with mounting the sissy bar.

Yeah JT, I thought about the theft thing, the OEM seat screw can be removed using a coin from your pocket. If they want to steal your seat they will get it no matter what we do, I'd rather they steal the trike, it is insured for full replacement value thanks to Jim Palmer

I like the tie downs you put on, very big plus IMO

[SouthportFLRT]

Finished the installation of the Design Engineering Inc. 901045 Heat Shield Liners on my 2019 FLRT which fit perfectly. Kudos to D.E.I. for their expertise in creating the product. $67.50 w/Free shipping from an Ebay vendor located in Centerberg OH. Yep, small town is geographically in the center of Ohio. Installed heim joints on the stock linkage on my wife's FatBoy Lo as well as my FLRT. Hoping to get out for a ride later today to test the results. Having read so many other's opinions regarding the stock shifter joints...pressed into place with questionable life expectancy....I opted for Stainless Steel heim joints. Had to order 4 Cap screws from Beach House H-D...Harley part #4192. Easy-peasy installation with thanks to various YouTubers. As for Seat Post Screw...I opted for a Stainless 1/4-20 x 2 inch Allen-Drive Cap screw. The Mustang seat made it difficult to use any other type of bolt. Plus the security of the Allen-Drive....keeping a set of Hex Keyes in the trunk.

[SouthportFLRT]

I mistakenly stated that the D.E.I. 901045 was $87.50 w/Free Shipping. Major error. The Kit was and remains today $69.70 w/Free Shiiping.. Yes, Ebay adds State Tax, but one heck of a deal nonetheless. A major measurable decrease in felt engine heat. I also use a Captain Itch Crotch Cooler. Not saying that the combination is akin to having an A/C unit....but a close 2nd..maybe (?) for both Rider and Passenger.

[jcrp]

Hello,

This is the last 3 weeks or so

added driving lights, luggage rack DK cooling fins, since I live in Arizona, Hogworkz mid mount air deflectors, also S&S 55 mil manifold and NICECNC Fuel Injector Rail Fuel Rail, also put in LED eagle rears, and led headlight, and a K&N air filter. I also got a softail tranny lid and vented it.

From Sierra Vista, AZ

[Jack Klarich]

Greased my shift shaft bushing and installed a seat bolt that doubles as a tie down

[JTJersey]

Greased my shift shaft bushing and installed a seat bolt that doubles as a tie down

I may have to steal that seat bolt idea. I like it.

[rhino 2]

I may have to steal that seat bolt idea. I like it.

Just don’t park at Walmart…Jose might need a new seat for his zero turn..😉-😉..

[Jack Klarich]

Just don’t park at Walmart…Jose might need a new seat for his zero turn..😉-😉..

Hope Jose is not allergic to lead

[rhino 2]

Hope Jose is not allergic to lead

-😁-………..

[RKplus10]

My seat bolt was a valve cover bolt in a previous life.