Brake/Running light for Freewheeler Trunk Rack

[52edub]

In case someone hasn't seen this. Great product from Custom Dynamics. Easy install.

https://www.customdynamics.com/air-w...it-freewheeler

[ultrafxr]

About time. That's cool. Had the Air Wing tour-pak rack on three different CVO Ultras / Limiteds and added the H-D LED lights to them. Now they were the bomb as long as your were riding or a cold dark moonless night. Otherwise if it was daylight you couldn't see the LEDs for love nor money. Knowing Custom Dynamics I bet these are super bright. Good on them.

[MDO]

In case someone hasn't seen this. Great product from Custom Dynamics. Easy install.

https://www.customdynamics.com/air-w...it-freewheeler

Could you please post some pics of it on your trike.

[52edub]

Just ordered it yesterday so soon as I get it and installed pics will be added. Although the video shows it to be a lot brighter than Harley's set up.

[Ronbo]

In case someone hasn't seen this. Great product from Custom Dynamics. Easy install.

https://www.customdynamics.com/air-w...it-freewheeler

Thanks for posting this! I've been wanting to do this for a long time, and looking at the install instructions it looks like a pretty professional design. Really looking forward to seeing some photos with it installed. Thanks again, Ron

[52edub]

Got the kit and it installed super easy. Little teething problems with the female plug in harness, but I worked out the bugs with a great tech at Custom Dynamics. Photos will come soon as the weather clears and I can roll the bike out in to the sunlight. You do not have to remove the rack if it is already installed. Pulling the wiring through the rack and in to the trunk was simple. Attaching the light on with allen head bolts is just as simple. Make sure you remove the nut and washers on the rack leg that has the hole in it, as pulling the wiring through with the pins attached may get them tear them off. The instructions are clear except on putting the pins in the connector. There are three colors on the wiring from the light: Blue, Black and Yellow. Match the yellow with red on the female connector attached to Custom Dynamics harness. Make sure the pins are locked in to the connector. This is a very straight foward job without any special tools and for $70 bucks totally worthwhile. The light is bright and the brake light more so. Photos to come.

[Old Road Dog]

Yup.Gonna order the light.These people are gettin stupider by the week.Yesterday a rider turning left into the dealership got rear ended here.4 lane with a turning lane and still.

[MDO]

You can't fix stupid!

[Ronbo]

Got the kit and it installed super easy. Little teething problems with the female plug in harness, but I worked out the bugs with a great tech at Custom Dynamics. Photos will come soon as the weather clears and I can roll the bike out in to the sunlight. You do not have to remove the rack if it is already installed. Pulling the wiring through the rack and in to the trunk was simple. Attaching the light on with allen head bolts is just as simple. Make sure you remove the nut and washers on the rack leg that has the hole in it, as pulling the wiring through with the pins attached may get them tear them off. The instructions are clear except on putting the pins in the connector. There are three colors on the wiring from the light: Blue, Black and Yellow. Match the yellow with red on the female connector attached to Custom Dynamics harness. Make sure the pins are locked in to the connector. This is a very straight foward job without any special tools and for $70 bucks totally worthwhile. The light is bright and the brake light more so. Photos to come.

Thanks for the update, very helpful. Looking forward to the photos. One would think custom dynamics would have better and more photo of a new product.

[52edub]

Pics:



Will add some more later today.