Very good read
I sure would have thought the M8 with 4 valve heads would push more air
A New Testing Report on External Breather System(EBS) Air Volume/Flow
Has Been Published on Our Site!
A piece taken from the report-
"When we embarked on designing our 4 Stage Catch-Can for External Breather Systems (EBS), we decided that the first order of business was to get accurate data on How Much Air passed through the stock Harley Breather Bolts, so we could design the best possible Catch-Can."
Check out the Full Report with video of testing at the link below!
Breather System Flow Testing, Results, & Video
Very good read
I sure would have thought the M8 with 4 valve heads would push more air
Nuff Said," Were Burnin Daylight, Lets Ride"(Sober 37 years)
Current ride : 2021 FREEWHEELER M8, oldest ride 1960 FL
Not sure what EBS You need for Your Bike?
Check out this REPORT on Choosing the Right EBS for Your Bike!
Hi Kevin,
I am running an S&S Teardrop Air Cleaner on my Tri. Not sure which EBS might work with it. Do you have any installs of an EBS on this AC yet?
Check out this FAQ Video!
Thanks for the great Air Cleaner EBS combo! Here is how mine turned out on my 2017 M8
Wow! Somehow this post got missed. Apologies for the delayed response. The DIY kit is what would be required for this A/C, but again, glad you're liking your new set-up!
How often should the can be cleaned? Mine is the four stage thing.
To be honest ... forgot it was there ... LOL ...
Depending on how much oil your spitting, every 5-10 thousand miles.
The Catch Can is easily emptied by holding the top with your fingers (or a wrench) and
unscrewing the bottom (can) from the top. Inside you will see:
2 pieces of Low Density foam at the bottom
3 pieces of High Density foam on the tube
3 vented separators between the top foam to slow down oil and water migration
All 5 pieces of foam can be cleaned with hot soapy water...either in place, or by
removing, then cleaning.
Kevin