I'm Installing a hog tunes system to Memphis shades fairing, all seems ok with the exception of hooking up a orange wire to a switched positive power source, can,t seem to find in manual or you tube, can some one help
Thanks
I'm Installing a hog tunes system to Memphis shades fairing, all seems ok with the exception of hooking up a orange wire to a switched positive power source, can,t seem to find in manual or you tube, can some one help
Thanks
Did you contact Hog tunes? I had an issue with an install years ago, they were great ... I do know you got to be careful with the Cam Bus ... I don't understand it ... but I know you can mess it up fairly easily.
#1 on Fuzzys post be careful with can bus system
Nuff Said," Were Burnin Daylight, Lets Ride"(Sober 37 years)
Current ride : 2021 FREEWHEELER M8, oldest ride 1960 FL
On both front sides of gas tank you will find a white connector that is used for running lamps on the RK. There is a power wire and also a ground wire in that connector which runs off the ignition switch and is a fused circuit. You can tap into those wires before the connector or do what I did was get the other half of the connector and the terminals from the dealer and plug your made up harness into it. A 12V test lamp will insure you have the correct wires. That is what I found on my 2019 FW.