Needing to flush rear brakes on my Cobra CSC Trike. What's the sequence to this? I believe the rears are linked to fronts. Correct me if I'm wrong.
Needing to flush rear brakes on my Cobra CSC Trike. What's the sequence to this? I believe the rears are linked to fronts. Correct me if I'm wrong.
2002 GL1800 with CSC trike kit
Try This
Cobra trikeBrake bleeding procedure:1.Using a vacuum bleeder, follow this procedure carefully.a.Left front upper bleed valve.b.Right front lower bleed valve.c.Rear caliper rear bleed valves.d.Anti-dive bleed valve.e.Rear caliper front bleed valves.2.Hand bleed the system using the above sequence. Until all air is removed from the lines.3.Allow the bike to set for a minimum of 20 minutes and recheck.4.If there is excessive pedal travel on the first pump, repeat steps 1 through 3
Nuff Said," Were Burnin Daylight, Lets Ride"(Sober 37 years)
Current ride : 2021 FREEWHEELER M8, oldest ride 1960 FL
Did it work for you my goldwing has setting for long time i have no back brakes
Nuff Said," Were Burnin Daylight, Lets Ride"(Sober 37 years)
Current ride : 2021 FREEWHEELER M8, oldest ride 1960 FL